Difficulty: Easy & Basic
Which ideal cycle models a gas turbine?
A Brayton cycle
B Otto cycle
C Diesel cycle
D Rankine cycle
Answer: A. Brayton cycle. The ideal gas-turbine cycle is the Brayton cycle.
What is the usual gas-turbine combustion mode?
A Intermittent firing
B External combustion
C Continuous combustion
D Pulse detonation
Answer: C. Continuous combustion. Most gas turbines burn fuel continuously in a steady-flow combustor.
Which component compresses the incoming air?
A Turbine
B Compressor
C Nozzle
D Gearbox
Answer: B. Compressor. The compressor raises the pressure of air before combustion.
Where does fuel release heat in a gas turbine?
A Inlet
B Diffuser
C Exhaust
D Combustor
Answer: D. Combustor. Fuel burns with compressed air in the combustion chamber.
What does the turbine extract from hot gas?
A Shaft work
B Wing lift
C Fuel pressure
D Ram drag
Answer: A. Shaft work. The turbine extracts energy from hot gas to drive shafts and accessories.
Which sequence shows a basic gas-turbine flow path?
A Combustor, inlet, turbine, compressor
B Turbine, nozzle, inlet, combustor
C Nozzle, turbine, compressor, inlet
D Inlet, compressor, combustor, turbine
Answer: D. Inlet, compressor, combustor, turbine. Air passes through the inlet, compressor, combustor, and turbine before exhaust.
Which inlet part can slow air before compression?
A Nozzle
B Gearbox
C Diffuser
D Igniter
Answer: C. Diffuser. A diffuser slows the incoming flow and raises its static pressure.
What links a compressor and turbine mechanically?
A Fuel manifold
B Shaft
C Starter motor
D Exhaust duct
Answer: B. Shaft. The turbine transmits power to the compressor through a shaft.
Which compressor sends air along the engine axis?
A Axial compressor
B Centrifugal compressor
C Piston compressor
D Screw compressor
Answer: A. Axial compressor. An axial compressor moves air mainly parallel to the shaft.
Which compressor throws air outward from an impeller?
A Axial compressor
B Centrifugal compressor
C Piston compressor
D Roots blower
Answer: B. Centrifugal compressor. A centrifugal impeller accelerates air radially outward.
What starts combustion in a gas-turbine engine?
A Thrust reverser
B Diffuser
C Oil cooler
D Ignition system
Answer: D. Ignition system. Igniters initiate combustion during starting and relight.
Why can a turbine use cooling air?
A To raise fuel density
B To reduce wing drag
C To protect hot-section parts
D To lubricate tires
Answer: C. To protect hot-section parts. Cooling air helps keep turbine blades and vanes within material limits.
Which accessory can turn an engine during start?
A Starter
B Nozzle
C Afterburner
D Inlet guide
Answer: A. Starter. The starter rotates the engine to establish airflow and ignition conditions.
What does an accessory gearbox commonly drive?
A Wing flaps
B Engine accessories
C Landing wheels
D Cabin seats
Answer: B. Engine accessories. The gearbox powers accessories such as pumps and generators.
Which measurement often indicates turbine exhaust temperature?
A RPM only
B Oil volume
C EGT
D Fuel density
Answer: C. EGT. Exhaust gas temperature is monitored as an engine operating limit.
What does a recuperator transfer to compressed air?
A Fuel pressure
B Shaft torque
C Ram drag
D Exhaust heat
Answer: D. Exhaust heat. A recuperator uses hot exhaust to preheat compressed air before combustion.
Where is an intercooler placed in a multistage compressor?
A Between compressor stages
B After the nozzle
C Inside the fuel tank
D Behind the propeller
Answer: A. Between compressor stages. Intercooling reduces air temperature between compression stages.
Which gas-turbine component directs flow onto turbine blades?
A Fuel tank
B Nozzle guide vanes
C Starter clutch
D Oil filter
Answer: B. Nozzle guide vanes. Stationary nozzle guide vanes turn and accelerate gas into the turbine rotor.
What does an engine spool contain?
A Fuel nozzles only
B Fixed inlet panels
C Landing gear parts
D Shaft-linked rotating groups
Answer: D. Shaft-linked rotating groups. A spool is a compressor and turbine assembly connected by a shaft.
What is a common gas-turbine advantage over piston engines?
A No fuel consumption
B No moving parts
C High power-to-weight ratio
D Zero exhaust heat
Answer: C. High power-to-weight ratio. Gas turbines can provide high power for their mass.
Which gas-turbine part expels the exhaust flow?
A Exhaust nozzle
B Combustor liner
C Compressor diffuser
D Accessory gearbox
Answer: A. Exhaust nozzle. The exhaust nozzle directs the hot gas leaving the turbine.
In a turboshaft, useful output is mainly what?
A Jet thrust
B Wing lift
C Ram pressure
D Shaft power
Answer: D. Shaft power. A turboshaft is designed chiefly to deliver power through an output shaft.
Why may compressor bleed air be used?
A Fuel storage
B Anti-icing or cooling
C Wing extension
D Brake pressure
Answer: B. Anti-icing or cooling. Bleed air can supply anti-icing and component cooling systems.
Which stationary turbine part precedes a rotor row?
A Piston crown
B Propeller hub
C Nozzle guide vane
D Fuel pump
Answer: C. Nozzle guide vane. Stationary guide vanes direct gas onto the following turbine rotor.
What mainly determines the shaft power from a free turbine?
A Gas energy extracted
B Wing aspect ratio
C Landing speed
D Cabin pressure
Answer: A. Gas energy extracted. A free power turbine extracts gas energy to drive an external load.