Difficulty: Easy & Basic
Which part stabilizes a flame inside the combustor?
A Fuel pump
B Turbine disk
C Swirler
D Flame holder
Answer: D. Flame holder. A flame holder creates a recirculation zone that helps keep combustion stable.
What does a compressor stator do between rotor rows?
A Burns fuel
B Diffuses and redirects flow
C Extracts shaft power
D Meters oil
Answer: B. Diffuses and redirects flow. Stator vanes diffuse and redirect air before the next rotor row.
Why does a combustor use a swirler?
A To drive the shaft
B To mix and stabilize flow
C To cool the nozzle
D To filter oil
Answer: B. To mix and stabilize flow. Swirl promotes fuel-air mixing and helps establish a stable flame zone.
What protects the combustor casing from peak flame temperature?
A Starter
B Fuel nozzle
C Liner cooling
D Gearbox
Answer: C. Liner cooling. Combustor liners use cooling arrangements to protect the surrounding structure.
Which system meters fuel to match engine demand?
A Nozzle guide
B Oil cooler
C Thrust reverser
D Fuel control
Answer: D. Fuel control. The fuel-control system schedules fuel flow for the required engine operation.
What is the purpose of an atomizing fuel nozzle?
A Compress inlet air
B Break fuel into droplets
C Measure shaft speed
D Cool turbine blades
Answer: B. Break fuel into droplets. Atomization creates small fuel droplets that mix and burn more effectively.
Which instrument measures exhaust gas temperature?
A Tachometer
B Barometer
C Thermocouple
D Pitot tube
Answer: C. Thermocouple. Thermocouples are commonly used to measure engine gas temperatures.
What do variable compressor stators help control?
A Blade incidence and flow
B Fuel tank pressure
C Nozzle noise only
D Oil viscosity
Answer: A. Blade incidence and flow. Variable stators adjust airflow direction and compressor matching across operating conditions.
What does an inlet guide vane do before the first rotor?
A Adds fuel
B Measures exhaust
C Drives accessories
D Swirls incoming air
Answer: D. Swirls incoming air. Inlet guide vanes set the direction of flow entering the compressor rotor.
Why may a combustor liner have dilution holes?
A To store fuel
B To raise compressor speed
C Cool and shape exit flow
D To remove shaft torque
Answer: C. Cool and shape exit flow. Dilution air lowers and distributes combustor exit temperature for the turbine.
Which component converts gas energy into rotor torque?
A Diffuser
B Turbine rotor
C Igniter
D Inlet lip
Answer: B. Turbine rotor. Gas expanding across turbine blades produces torque on the rotating shaft.
A dual-spool engine has what arrangement?
A Two shaft-linked rotor groups
B Two combustors only
C Two fuel tanks
D No compressor
Answer: A. Two shaft-linked rotor groups. Its high- and low-pressure compressor-turbine groups rotate on separate shafts.
What can bleed air supply besides turbine cooling?
A Fuel atomization
B Exhaust mixing
C Propeller pitch
D Aircraft anti-icing
Answer: D. Aircraft anti-icing. Compressed bleed air can be routed to aircraft anti-icing systems.
Why are turbine blades often made with cooling passages?
A To raise fuel pressure
B To shorten the shaft
C To lower metal temperature
D To cool the intake
Answer: C. To lower metal temperature. Internal cooling helps keep blade metal below its allowable temperature.
What does an engine starter initially accelerate?
A Engine rotor
B Exhaust plume
C Wing flap
D Fuel tank
Answer: A. Engine rotor. The starter turns the rotor to establish airflow for light-off.
Which accessory is typically driven by the gearbox?
A Winglet
B Oil pump
C Landing light
D Thrust reverser
Answer: B. Oil pump. The accessory gearbox commonly drives lubrication and fuel pumps.
What is a compressor rotor row made of?
A Fixed liners only
B Fuel injectors
C Exhaust seals
D Rotating blades
Answer: D. Rotating blades. Rotor blades add work to the air as the compressor shaft turns.
Why use multiple compressor stages?
A To raise pressure progressively
B To stop combustion
C Halt airflow
D To eliminate turbine work
Answer: A. To raise pressure progressively. Successive stages build the required pressure rise within practical limits.
What does a turbine nozzle guide vane primarily do?
A Meters compressor bleed
B Starts ignition
C Turns and accelerates gas
D Cools the fuel tank
Answer: C. Turns and accelerates gas. Stationary guide vanes direct hot gas onto turbine rotor blades.
A shaft-power gas turbine is commonly called what?
A Ramjet
B Turboshaft
C Pulsejet
D Turbojet
Answer: B. Turboshaft. A turboshaft is optimized to deliver mechanical shaft output.
Why is exhaust temperature monitored during operation?
A To measure wing lift
B To set runway length
C To control cabin lights
D To protect engine limits
Answer: D. To protect engine limits. Temperature monitoring helps avoid exceeding hot-section operating limits.
What does a fuel pump provide to the metering system?
A Compressed air
B Turbine torque
C Pressurized fuel
D Exhaust pressure
Answer: C. Pressurized fuel. Fuel pumps supply the pressure needed for reliable metering and injection.
Which engine section contains the highest gas temperatures?
A Hot section
B Inlet duct
C Accessory case
D Fan cowl
Answer: A. Hot section. The combustor and turbine form the engine’s hot section.
What can a thrust reverser redirect after landing?
A Exhaust flow
B Fuel return
C Oil pressure
D Compressor inlet
Answer: A. Exhaust flow. A thrust reverser redirects engine flow to help produce reverse thrust.
Which gas path receives heat in the combustor?
A Lubricating oil
B Hydraulic fluid
C Compressed air
D Cooling water
Answer: C. Compressed air. Fuel burns with compressed air in the combustor.