Difficulty: Easy & Basic
Which reservoir holds the vehicle’s usable fuel?
A Fuel rail
B Float bowl
C Oil sump
D Fuel tank
Answer: D. Fuel tank. The tank stores the fuel supply before it reaches the engine.
From the tank, which component moves fuel toward the engine?
A Radiator
B Alternator
C Brake booster
D Fuel pump
Answer: D. Fuel pump. The fuel pump draws or pushes fuel through the supply circuit.
Why is a fuel filter installed?
A Remove contaminants
B Raise octane rating
C Cool the injectors
D Measure fuel level
Answer: A. Remove contaminants. A filter traps particles that could damage pumps or injectors.
Where does a port fuel injector normally spray?
A Exhaust manifold
B Oil gallery
C Intake port
D Fuel tank
Answer: C. Intake port. Port injection sprays fuel into the intake port near the intake valve.
What does an injector meter into the engine?
A Coolant volume
B Oil pressure
C Fuel quantity
D Exhaust noise
Answer: C. Fuel quantity. An injector meters fuel delivery according to the commanded pulse and pressure.
Which passage supplies several injectors in port injection?
A Radiator hose
B Fuel rail
C Brake line
D Intake duct
Answer: B. Fuel rail. The rail distributes pressurized fuel to the injectors.
How does a carburetor prepare charge?
A Separates oil from coolant
B Mixes fuel with air
C Pressurizes exhaust gas
D Measures wheel speed
Answer: B. Mixes fuel with air. A carburetor meters fuel into incoming air to form a combustible mixture.
Which system injects petrol directly into the cylinder?
A Port fuel injection
B Carburetor system
C Low-pressure return
D Gasoline direct injection
Answer: D. Gasoline direct injection. GDI places the injector in the combustion chamber.
What is a common rail in diesel injection?
A Fuel tank vent tube
B Shared high-pressure reservoir
C Return-line filter
D Carburetor float chamber
Answer: B. Shared high-pressure reservoir. A common rail stores high-pressure fuel and supplies multiple injectors.
What does a fuel pressure regulator control?
A Fuel pressure
B Coolant temperature
C Injector resistance
D Tank capacity
Answer: A. Fuel pressure. The regulator maintains fuel pressure within the system’s specified range.
In a return-type system, where does unused fuel flow?
A Into exhaust pipe
B Back to tank
C Into oil sump
D To radiator core
Answer: B. Back to tank. The return line routes excess fuel from the rail or regulator back to the tank.
Which sender reports remaining fuel level?
A Fuel injector
B Pressure regulator
C Venturi tube
D Tank level sender
Answer: D. Tank level sender. A float or equivalent sender converts tank level into an electrical signal.
What is vapor lock in a fuel line?
A Fuel filter blocks water
B Injector coil overheats
C Vapor interrupts liquid flow
D Tank fills with air
Answer: C. Vapor interrupts liquid flow. Vapor bubbles can impede liquid fuel delivery and cause poor running.
What does a diesel water separator remove?
A Water from fuel
B Air from coolant
C Soot from exhaust
D Oil from crankcase
Answer: A. Water from fuel. Water separators collect water that may contaminate diesel fuel.
Which component can transfer fuel from tank to a high-pressure pump?
A Lift pump
B Oil pump
C Water pump
D Vacuum pump
Answer: A. Lift pump. A lift pump supplies low-pressure fuel to the injection pump.
What does an injector nozzle shape influence?
A Fuel spray pattern
B Engine compression ratio
C Coolant circulation
D Crankshaft balance
Answer: A. Fuel spray pattern. Nozzle design shapes spray distribution and atomization in the chamber.
Why is fuel atomized into small droplets?
A Improve evaporation and mixing
B Increase tank pressure
C Reduce tire slip
D Cool brake fluid
Answer: A. Improve evaporation and mixing. Small droplets evaporate and mix with air more readily.
Which device captures fuel vapors from the tank?
A Oil filter
B Evaporative canister
C Intercooler
D Exhaust silencer
Answer: B. Evaporative canister. An activated-carbon canister stores fuel vapors for later purging into the engine.
What closes the vehicle’s fuel-filler opening?
A Fuel rail
B Injector coil
C Filler cap
D Pressure plate
Answer: C. Filler cap. The cap seals the filler neck and helps limit vapor release.
On a cold carbureted engine, what does the choke provide?
A Lower fuel pressure
B Later exhaust timing
C Richer starting mixture
D Higher coolant flow
Answer: C. Richer starting mixture. The choke restricts intake air to enrich the cold-start mixture.
What does the float bowl help maintain?
A Carburetor fuel level
B Injector pulse width
C Diesel rail pressure
D Tank vapor pressure
Answer: A. Carburetor fuel level. The float and needle valve regulate fuel level in the bowl.
How does a carburetor venturi help draw fuel?
A Slows air and raises pressure
B Heats fuel electrically
C Speeds air and lowers pressure
D Measures exhaust oxygen
Answer: C. Speeds air and lowers pressure. The venturi accelerates air and creates a pressure drop that draws fuel.
Which pump supplies high pressure for gasoline direct injection?
A Low-pressure lift pump
B High-pressure fuel pump
C Coolant circulation pump
D Engine oil pump
Answer: B. High-pressure fuel pump. GDI needs a high-pressure pump to feed its in-cylinder injectors.
What is a benefit of an in-tank electric pump?
A Directly drives the wheels
B Controls valve timing
C Stores exhaust heat
D Reliable fuel delivery
Answer: D. Reliable fuel delivery. An in-tank pump provides consistent fuel supply and is cooled by surrounding fuel.
Which fuel commonly powers a conventional petrol SI engine?
A Kerosene only
B Engine oil
C Coolant mixture
D Gasoline
Answer: D. Gasoline. Conventional spark-ignition passenger engines commonly use gasoline.