Difficulty: Easy & Basic
Plain, twill and satin are distinguished primarily by which feature?
A Finishing temperature
B Fibre colour
C Warp–weft interlacement pattern
D Yarn package size
Answer: C. Warp–weft interlacement pattern. The three basic weave families differ in how warp ends and weft picks pass over and under each other.
What is a float in a woven structure?
A Yarn spanning multiple crossings
B Yarn broken at edge
C Space between yarns
D Gap between two plies
Answer: A. Yarn spanning multiple crossings. A float occurs where a yarn passes over or under two or more consecutive crossing yarns.
For a standard weft-faced satin-family fabric, which name is commonly used?
A Sateen
B Taffeta
C Satinette
D Seersucker
Answer: A. Sateen. Sateen commonly uses the satin interlacement with weft floats predominating on the face.
Identify the smallest standard repeat of plain weave.
A 1 end × 1 pick
B 4 ends × 4 picks
C 2 ends × 2 picks
D 3 ends × 3 picks
Answer: C. 2 ends × 2 picks. Two adjacent ends and two adjacent picks contain the complete alternating pattern.
At each pick, what does a lifting plan specify?
A Reed dents to fill
B Shafts to raise
C Yarn packages to wind
D Ends to splice
Answer: B. Shafts to raise. The lifting plan lists the shaft combinations raised for successive picks.
Why can woven fabric often deform easily on the bias?
A Yarns rotate at crossings
B Fibres dissolve
C Warp yarns disappear
D Picks become longer instantly
Answer: A. Yarns rotate at crossings. Bias loading lets warp and weft rotate relative to each other and changes the angle between them.
In a plain weave, how does one warp end pass over successive picks?
A Over three, under one
B Over one, under one
C Over two, under two
D Always over every pick
Answer: B. Over one, under one. Each end alternates over and under adjacent picks, with the next end following the opposite order.
Which document shows the assignment of warp ends to heald shafts?
A Lifting plan
B Recipe sheet
C Fabric inspection map
D Drafting plan
Answer: D. Drafting plan. The draft tells the weaver which shaft controls each warp end.
Name the space between neighbouring yarns through which air may pass.
A Warp float
B Binding point
C Yarn crimp
D Inter-yarn pore
Answer: D. Inter-yarn pore. An inter-yarn pore is the opening between yarns and can provide a path for air.
Compared with woven construction, what element creates the basic connectivity of a knit?
A Straight crossed tapes
B Intermeshed loops
C Parallel unbonded fibres
D Fused warp ends
Answer: B. Intermeshed loops. Knits join successive yarn loops. Wovens join warp and weft with over-and-under crossings.
Diagonal lines on a basic woven fabric normally indicate which construction?
A Plain
B Satin
C Twill
D Basket
Answer: C. Twill. Twill steps the interlacement from one end to the next, producing diagonal lines.
Find the correct description of a warp-faced surface.
A Warp yarns predominate
B Fibre webs predominate
C Weft yarns predominate
D Both yarns are absent
Answer: A. Warp yarns predominate. The side is warp faced when the visible surface is mostly formed by warp floats.
Along which edge of woven cloth does the selvage run?
A Cross-cut edge
B Bias-cut edge
C Folded centre
D Lengthwise edge
Answer: D. Lengthwise edge. The selvage is the finished longitudinal edge parallel to the warp.
Basket weave modifies plain weave by using which arrangement?
A Perfectly straight floats
B Only one warp yarn
C Yarns working in groups
D An untwisted fibre web
Answer: C. Yarns working in groups. Adjacent ends and picks interlace as groups, producing a basket-like pattern.
Picks per centimetre describes spacing in which fabric dimension?
A Along the diagonal
B Across the width
C Along the length
D Through the thickness
Answer: C. Along the length. Picks lie crosswise and are counted along the length, perpendicular to their direction.
By the warp-up drawing convention, what does a filled square represent?
A Weft above warp
B Warp above weft
C A missing pick
D No warp yarn
Answer: B. Warp above weft. A filled square marks a crossing where the warp end lies over the pick on the viewed face.
Select the structure formed by bonding or entangling fibres in a web.
A Nonwoven
B Woven
C Warp knitted
D Weft knitted
Answer: A. Nonwoven. A nonwoven is made by bonding or entangling a fibre web without weaving or knitting it.
In a 2×2 basket weave, how many adjacent warp ends work as one group?
A Four
B Three
C One
D Two
Answer: D. Two. The first 2 refers to two warp ends in each group. The second refers to two weft picks.
Compared with plain weave, which weave typically has the most widely spaced binding points?
A Basket
B Plain rib
C Satin
D Regular twill
Answer: C. Satin. Satin disperses its binding points. The resulting long floats tend to make its surface smooth.
Cutting at about 45° to warp and weft follows which direction?
A Weft direction
B True bias
C Warp direction
D Selvage direction
Answer: B. True bias. True bias lies halfway between the two perpendicular yarn systems.
What distinguishes a warp rib from ordinary plain weave?
A Diagonal step direction
B Groups of warp ends
C Groups of weft picks
D Scattered satin bindings
Answer: C. Groups of weft picks. Warp rib groups adjacent picks in the interlacement, extending the warp float over those picks.
On the conventional weave grid, columns represent which element?
A Yarn plies
B Warp ends
C Shaft positions
D Weft picks
Answer: B. Warp ends. The columns correspond to ends and the rows correspond to individual weft picks.
Crimp in a woven yarn refers to what geometric feature?
A Yarn twist
B Yarn colour
C Fibre fineness
D Yarn waviness
Answer: D. Yarn waviness. Crossing yarns force a woven yarn to bend above and below the other system, creating crimp.
If long exposed floats catch on an object, which surface defect can follow?
A Snagging
B Dye migration
C Warp sizing
D Felting
Answer: A. Snagging. An object can pull exposed float yarn from the surface, creating a snag.
For two otherwise comparable fabrics, increasing the ends per centimetre changes what directly?
A Weft density
B Finished fibre fineness
C Yarn linear density
D Warp density
Answer: D. Warp density. Ends per centimetre is the number of warp yarns across a unit of fabric width.