In an adiabatic turbine, h_in = 900 kJ/kg, h_out,s = 500 kJ/kg and real h_out = 580 kJ/kg at the same outlet pressure. Find isentropic efficiency.
A 64.4%
B 88.9%
C 125%
D 80%
Answer: D. 80%. Actual work is 320 kJ/kg and isentropic work is 400 kJ/kg. Their ratio is 0.80.
At 350 K, equilibrium constant K = 10 for a specified reaction standard state. Using R = 8.314 J/(mol·K), what is ΔG°?
A 0 kJ/mol
B −29.1 kJ/mol
C 6.70 kJ/mol
D −6.70 kJ/mol
Answer: D. −6.70 kJ/mol. ΔG° = −RT ln K, which gives about −6.70 kJ/mol.
At fixed temperature, a pressure increase gives a larger chemical potential rise in vapour than in liquid at the original saturation state. Which derivative explains this?
A ∂μ/∂P = molar volume
B ∂μ/∂P = molar entropy
C ∂μ/∂P = heat capacity
D ∂μ/∂P = zero
Answer: A. ∂μ/∂P = molar volume. For a pure phase at fixed temperature, dμ/dP equals its molar volume. Vapour has the larger molar volume.
If a feed has overall mole fraction z_A = 0.50 and equilibrium phase compositions x_A = 0.20 and y_A = 0.80, what fraction of feed is vapour?
A 0.60
B 0.80
C 0.50
D 0.25
Answer: C. 0.50. The lever rule gives (z_A − x_A)/(y_A − x_A) = 0.30/0.60.
Compress an ideal gas isentropically from 300 K with γ = 1.40 and a pressure ratio of 8. Estimate outlet temperature.
A 2,400 K
B 480 K
C 600 K
D 543 K
Answer: D. 543 K. Use T₂/T₁ = (P₂/P₁)^((γ−1)/γ) = 8^(2/7), giving about 543 K.
For a binary property M, its molar value satisfies M = 0.6 M̄_A + 0.4 M̄_B. If M = 22 cm³/mol and M̄_A = 18 cm³/mol, find M̄_B.
A 22 cm³/mol
B 28 cm³/mol
C 32 cm³/mol
D 10 cm³/mol
Answer: B. 28 cm³/mol. Subtract the A contribution 10.8 from 22. Then divide the remaining 11.2 by 0.4.
For ideal-gas equilibrium A ⇌ 2B at fixed temperature, adding an inert at constant total pressure expands volume. Which direction is favoured?
A Toward fewer gas moles
B Toward only solid formation
C No composition shift ever
D Toward more gas moles
Answer: D. Toward more gas moles. At fixed total pressure, adding inert dilutes partial pressures. For positive change in gas mole count, the reaction quotient drops and favours products.
Using the isothermal Maxwell relation for an ideal gas, find the change in molar entropy when pressure doubles at fixed temperature.
A −R ln 2
B 0
C −2R
D R ln 2
Answer: A. −R ln 2. For an ideal gas, (∂Sₘ/∂P)_T = −R/P. Integrating from P to 2P gives −R ln 2.
In a multicomponent flash, 40% of the feed becomes vapour and K_A = y_A/x_A = 2. The feed mole fraction of A is 0.30. What is the liquid mole fraction of A?
Assuming ΔH° remains constant, how does an exothermic reaction’s K vary as temperature rises?
A It remains constant
B It increases
C It decreases
D It becomes negative
Answer: C. It decreases. The van ‘t Hoff slope d ln K/dT is ΔH°/(RT²), which is negative for exothermic reaction.
The slope of a pure substance’s saturation curve is ΔH_vap/(T ΔV_vap). At 400 K, ΔH_vap = 32 kJ/mol and ΔV_vap = 0.080 m³/mol. Find dP_sat/dT.
A 0.64 kPa/K
B 0.10 kPa/K
C 10.0 kPa/K
D 1.0 kPa/K
Answer: D. 1.0 kPa/K. Divide 32,000 J/mol by 400 × 0.080 m³·K/mol to obtain 1,000 Pa/K.
For an adiabatic compressor, inlet enthalpy is 250 kJ/kg, isentropic outlet enthalpy is 330 kJ/kg and real outlet enthalpy is 350 kJ/kg. Find isentropic efficiency.
A 22.9%
B 80%
C 125%
D 94.3%
Answer: B. 80%. For compressors, ideal work input is divided by actual work input: 80/100.
At x_A = 0.25, pure molar volumes are 50 and 100 cm³/mol. Measured mixture volume is 85 cm³/mol. Find excess molar volume relative to the ideal molar mixture.
A 0 cm³/mol
B −2.5 cm³/mol
C 2.5 cm³/mol
D −15 cm³/mol
Answer: B. −2.5 cm³/mol. Ideal volume is 0.25 × 50 + 0.75 × 100 = 87.5 cm³/mol. The measured deviation is −2.5.
Suppose gas expands irreversibly from a compartment into vacuum in an insulated rigid tank. For an ideal gas of fixed composition, what happens to its temperature and entropy?
A Both remain fixed
B Temperature rises, entropy fixed
C Both decrease
D Temperature fixed, entropy rises
Answer: D. Temperature fixed, entropy rises. No heat or work crosses the boundary, so internal energy and ideal-gas temperature stay fixed. The increase in available volume raises entropy.
For a pure gas with known fugacity coefficient φ = 0.75 at 400 K, what is μ_real − μ_ideal at the same T and P? Use R = 8.314 J/(mol·K).
A 0.957 kJ/mol
B 0 kJ/mol
C −0.957 kJ/mol
D −2.494 kJ/mol
Answer: C. −0.957 kJ/mol. The chemical potential departure is RT ln φ. Here ln 0.75 is negative, giving about −957 J/mol.
At fixed temperature and pressure, the molar Gibbs energy curve has negative composition curvature at one composition. How is that state classified for small demixing fluctuations?
A It is strictly stable
B It is locally unstable
C It is necessarily ideal
D It has no curvature
Answer: B. It is locally unstable. Negative curvature lowers average Gibbs energy for small composition separation, indicating local instability.
For ideal gas with constant molar cₚ = 30 J/(mol·K), temperature rises from 300 to 600 K while pressure doubles. Use R = 8.314 J/(mol·K). Find approximate ΔSₘ.
A 26.6 J/(mol·K)
B 15.0 J/(mol·K)
C 20.8 J/(mol·K)
D −5.8 J/(mol·K)
Answer: B. 15.0 J/(mol·K). Apply cₚ ln(T₂/T₁) − R ln(P₂/P₁) = (30 − 8.314) ln 2.
For ideal-gas equilibrium A ⇌ 2B, an inert gas is added at constant temperature and volume. How do the equilibrium amounts of A and B respond?
A Amount of A must rise
B Amount of B must rise
C They stay unchanged
D Both go to zero
Answer: C. They stay unchanged. At fixed T and volume, each reacting species’ partial pressure is unchanged by adding inert. The existing equilibrium therefore remains valid.
If infinitely dilute solute follows Henry standard state, what should its Henry-standard activity coefficient approach as solute mole fraction tends to zero?
A One
B The system pressure
C Infinity
D Zero
Answer: A. One. The Henry standard is defined so the solute coefficient tends to unity at infinite dilution.