Chemical Engineering Thermodynamics MCQs (Set-1)

Difficulty: Easy & Basic

What does the first law require for every thermodynamic process?

A Constant pressure
B Conservation of energy
C Constant temperature
D Zero entropy generation

At the critical point, which phases become indistinguishable for a pure substance?

A Two unrelated liquids
B Solid and liquid only
C Solid and gas only
D Liquid and vapour

For a homogeneous sample divided into two equal portions, which property of each portion stays unchanged?

A Temperature
B Total volume
C Total mass
D Total enthalpy

In quasistatic piston expansion, area under which curve gives boundary work?

A Pressure versus volume
B Entropy versus time
C Temperature versus pressure
D Volume versus time

Which law establishes the basis for comparing temperature through thermal equilibrium?

A Third law
B Second law
C Zeroth law
D First law

For a perfectly isolated system, which exchanges with surroundings are allowed?

A Work but no mass
B Mass but no heat
C Heat but no work
D Neither mass nor energy

Which dimensionless factor is defined as PV/(nRT)?

A Thermal efficiency
B Friction factor
C Prandtl number
D Compressibility factor

How does the thermodynamic state at the end of a complete cycle compare with the starting state?

A It always has higher energy
B It always has lower entropy
C It is the same
D It always has higher pressure

Which device absorbs heat from a cooler region while consuming work?

A Heat engine alone
B Refrigerator
C Free-expansion tank
D Mixer with no energy input

Pressure remains fixed during a process. Which description applies?

A Isothermal
B Isentropic
C Isobaric
D Isochoric

Identify a state property of a fixed-composition system.

A Shaft work
B Heat transferred
C Internal energy
D Boundary work

Which process has zero entropy generation?

A Sudden free expansion
B Reversible process
C Flow with friction
D Heat across finite temperature difference

What does the triple point represent for a pure substance?

A Three phases coexist
B No phase boundary exists
C Only two gases coexist
D Only critical liquid remains

In an ideal gas of fixed composition, internal energy depends on what variable alone?

A Volume
B Temperature
C Density
D Pressure

Select the transfer that can occur through an impermeable but thermally conducting wall.

A Heat transfer
B Mass transfer
C Molar transport
D Material diffusion

A heat engine’s thermal efficiency divides net work output by what?

A Total cycle entropy
B Heat absorbed from source
C Its working fluid volume
D Heat rejected to sink

What type of process keeps temperature constant?

A Isobaric
B Isochoric
C Isentropic
D Isothermal

What value does the compressibility factor take for an ideal gas?

A 1
B The absolute pressure
C R
D 0

Two bodies are at different temperatures and touch in an isolated enclosure. Which law determines the natural direction of heat transfer?

A Zeroth law
B First law alone
C Ideal gas law
D Second law

What is vapour quality in a two-phase liquid–vapour mixture?

A Mass fraction of vapour
B Pressure divided by temperature
C Mass fraction of liquid
D Liquid volume per vapour mass

What limits the efficiency of heat engines between two specified reservoirs?

A Mechanical volume alone
B Fuel molecular mass only
C Carnot efficiency
D Feed pressure alone

What does specific enthalpy measure?

A Heat per unit temperature
B Enthalpy per unit volume
C Pressure per unit mass
D Enthalpy per unit mass

When a piston is locked and a gas is heated, which volume condition applies?

A Isothermal
B Isochoric
C Adiabatic
D Isobaric

For a closed system undergoing reversible adiabatic change, what is ΔS?

A Zero
B Always positive
C Always negative
D Equal to the pressure rise

For an ideal throttling valve with negligible heat, work, kinetic and elevation changes, which property stays constant?

A Temperature for every fluid
B Specific volume
C Specific enthalpy
D Specific entropy