Chemical Engineering Thermodynamics MCQs (Set-2)

Difficulty: Easy & Basic

At vapour–liquid equilibrium, which property of a component must match in both phases?

A Phase volume
B Mole fraction in every case
C Mass density
D Chemical potential

At infinite dilution, which law often describes the partial pressure of a solute above a liquid?

A Henry’s law
B Zeroth law
C Kirchhoff’s law
D Gibbs phase rule

At its equilibrium pressure and temperature, what distinguishes an azeotrope?

A Both phases have equal density
B Both phases have equal volume
C Vapour and liquid compositions match
D All components are insoluble

In a binary mixture with a nonreactive vapour and liquid, how many independent intensive variables remain under Gibbs phase rule?

A Three
B Four
C One
D Two

What does fugacity replace in the ideal-gas form used to express chemical potential at fixed temperature?

A Molar volume alone
B Temperature
C Universal gas constant
D Pressure

Which point marks the first appearance of vapour as a liquid mixture is heated at fixed pressure?

A Triple point
B Dew point
C Bubble point
D Critical point always

Which variable affects the equilibrium constant for a specified reaction and standard state according to thermodynamics?

A Catalyst amount
B Temperature
C Initial reactant quantity alone
D Reactor volume alone

What makes a partial molar property different from the pure-component molar value?

A It is composition independent
B It always equals total volume
C It describes mixture contributions
D It is a flow rate

Above the critical temperature of a pure gas, what cannot be done by compression alone at that fixed temperature?

A Increase density
B Raise pressure
C Induce ordinary vapour–liquid transition
D Change molar volume

For an ideal liquid solution and ideal vapour, Raoult’s law relates partial pressure to liquid mole fraction times what?

A Total mixture mass
B Activity coefficient alone
C Liquid viscosity
D Pure-component saturation pressure

Subtracting the ideal-solution value from a real-solution property at the same temperature, pressure and composition gives which quantity?

A Shaft work
B Excess property
C Standard entropy only
D Critical property

When cooling a vapour mixture at fixed pressure, which point marks the first appearance of liquid?

A Bubble point only
B Triple point
C Boiling point of solvent only
D Dew point

In an ideal gas mixture with fixed total pressure, what happens to one component’s fugacity when its mole fraction rises?

A It stays unchanged
B It rises proportionally
C It remains zero
D It decreases inversely

How does the Gibbs energy test for spontaneous change apply at constant temperature and pressure in a closed system with no nonexpansion work?

A G decreases
B G increases
C G equals pressure
D G must be constant

How does an activity coefficient represent ideal liquid-solution behaviour under the Raoult standard state?

A It is unity
B It equals liquid mole fraction
C It equals total pressure
D It is zero

In a multicomponent equilibrium system, what does a phase mean?

A Every chemical element
B A physically homogeneous region
C A feed flow variable
D Each molecule separately

For a single pure component with solid, liquid and vapour coexisting, how many degrees of freedom remain?

A One
B Three
C Two
D Zero

When comparing volatility, which substance tends to be enriched in the equilibrium vapour of an ideal mixture at a given temperature?

A Higher melting point component
B Higher saturation pressure component
C Lower saturation pressure component
D Higher liquid viscosity component

For a pure ideal gas, what is its fugacity?

A Zero at all states
B Its absolute temperature
C Its pressure
D Its molar enthalpy

Consider the residual enthalpy of a gas. Which reference is subtracted from its real-gas enthalpy?

A Ideal gas at same T,P
B Pure solid at zero kelvin
C Saturated liquid at same T
D Ideal solution at same volume

What is the thermodynamic meaning of negative reaction Gibbs energy for an allowed forward reaction at fixed temperature and pressure?

A Forward reaction lowers G
B Forward reaction raises G
C No composition can change
D The reaction is at equilibrium

Why do phase-equilibrium models often use the ratio yᵢ/xᵢ?

A Set enthalpy datum
B Measure pipe friction
C Compute total system mass
D Express the distribution coefficient

At reaction equilibrium, the reaction Gibbs energy for an allowable reaction direction equals what?

A The standard Gibbs energy always
B The total enthalpy
C Zero
D The heat supplied

Which phase equilibrium describes a miscibility gap in an otherwise homogeneous liquid mixture?

A Liquid–liquid equilibrium
B Dry saturated steam
C Single ideal gas phase
D Solid–vapour equilibrium

When a pure liquid boils at a specified pressure, how does its vapour pressure compare with imposed pressure?

A Saturation pressure stays double
B They are equal
C Imposed pressure stays larger
D Vapour pressure is always zero