Difficulty: Easy & Basic
How does a service brake slow a vehicle?
A Friction converts motion energy
B Fuel flow stops
C Suspension springs lock
D Tires change diameter
Answer: A. Friction converts motion energy. Brake friction converts part of the vehicleβs kinetic energy into heat and reduces wheel speed.
Which component turns pedal input into hydraulic pressure?
A Master cylinder
B Brake rotor
C Wheel bearing
D Stabilizer link
Answer: A. Master cylinder. The master-cylinder piston pressurizes brake fluid when the driver presses the pedal.
What does brake fluid transmit?
A Engine torque
B Exhaust heat
C Tire rotation
D Hydraulic pressure
Answer: D. Hydraulic pressure. Brake fluid carries pressure from the master cylinder to the wheel brake mechanisms.
Which part clamps pads around a disc?
A Wheel cylinder
B Caliper
C Brake drum
D Master cylinder
Answer: B. Caliper. The caliper holds the pads and applies them to the rotating brake disc.
Brake pads normally press against which component?
A Axle shaft
B Wheel rim
C Brake rotor
D Control arm
Answer: C. Brake rotor. Disc-brake pads squeeze the rotor to create friction and braking torque.
What pushes shoes against a brake drum?
A Brake caliper
B Vacuum booster
C Wheel hub
D Wheel cylinder
Answer: D. Wheel cylinder. Hydraulic pressure moves pistons in the wheel cylinder, pressing the shoes outward.
Why is brake fluid suited to hydraulic circuits?
A It transmits pressure
B It lubricates tires
C It cools engine oil
D It stores spring energy
Answer: A. It transmits pressure. Brake fluid transfers pressure through enclosed lines to apply the brakes.
What does a brake booster reduce?
A Driver pedal effort
B Brake-pad thickness
C Wheel speed sensor output
D Rotor diameter
Answer: A. Driver pedal effort. The booster adds assistance so the driver needs less force at the pedal.
A tandem master cylinder normally supplies how many circuits?
A One shared tire
B Two separate circuits
C Four independent pedals
D No hydraulic circuit
Answer: B. Two separate circuits. A tandem design has two pressure sections, supporting split hydraulic circuits.
What carries pressurized fluid toward the wheels?
A Brake lines
B Tie rods
C Fuel pipes
D Propeller shafts
Answer: A. Brake lines. Rigid lines and flexible hoses route hydraulic pressure to the wheel brakes.
Which brake holds a parked vehicle?
A Service brake
B Engine brake
C Parking brake
D Emergency flasher
Answer: C. Parking brake. The parking brake is designed to hold a stationary vehicle against movement.
What warns following traffic during braking?
A Hazard reflectors
B Reverse lamps
C Fog lamps
D Brake lamps
Answer: D. Brake lamps. Brake lamps illuminate when the service brake is applied.
What is brake fade?
A A longer steering ratio
B Reduced braking from heat
C Lower tire pressure
D Excess spring travel
Answer: B. Reduced braking from heat. High temperature can reduce friction or system effectiveness, making braking weaker.
Why are some brake rotors vented?
A Reduce wheelbase
B Increase pad thickness
C Improve heat dissipation
D Store brake fluid
Answer: C. Improve heat dissipation. Internal passages let air move through the rotor and carry heat away.
Which friction material contacts a drum?
A Caliper seal
B Wheel bearing
C Brake-shoe lining
D Rotor vane
Answer: C. Brake-shoe lining. The lining on each brake shoe contacts the rotating drum to create friction.
What does a caliper piston move?
A Steering rack
B Brake pad
C Spring perch
D Wheel cylinder
Answer: B. Brake pad. Hydraulic pressure moves the caliper piston so the pad contacts the rotor.
Why is a flexible brake hose used near a wheel?
A Allow suspension movement
B Set wheel alignment
C Support vehicle weight
D Adjust spring rate
Answer: A. Allow suspension movement. A flexible hose accommodates wheel and suspension movement while carrying brake fluid.
Which valve can limit rear brake pressure?
A Relief damper
B Thermostatic valve
C Check engine valve
D Proportioning valve
Answer: D. Proportioning valve. A proportioning valve limits rear hydraulic pressure to help control rear-wheel lockup.
What does ABS help prevent during braking?
A Brake-lamp failure
B Wheel lockup
C Spring oscillation
D Engine overspeed
Answer: B. Wheel lockup. ABS modulates brake force to control wheel slip and help prevent prolonged lockup.
Which sensor supplies wheel-speed data to ABS?
A Oil-level sensor
B Knock sensor
C Ride-height sensor
D Wheel-speed sensor
Answer: D. Wheel-speed sensor. ABS monitors wheel rotation using wheel-speed sensors.
What can an ABS warning lamp indicate?
A Low engine oil
B ABS system fault
C Open fuel cap
D High tire tread
Answer: B. ABS system fault. The warning lamp alerts the driver to a detected ABS malfunction.
What does the brake pedal operate first in a hydraulic system?
A Wheel bearing
B Brake rotor
C Parking pawl
D Master-cylinder piston
Answer: D. Master-cylinder piston. Pedal linkage moves the master-cylinder piston to begin building hydraulic pressure.
What does a brake rotor rotate with?
A Brake pedal
B Master cylinder
C Wheel hub
D Control arm
Answer: C. Wheel hub. The rotor is attached to the wheel hub and turns with the wheel.
Why do brake shoes sit inside a drum?
A Shoes drive the axle
B Drum surrounds the shoes
C Drum stores fluid
D Shoes control steering
Answer: B. Drum surrounds the shoes. In a drum brake, the rotating drum encloses the shoes that expand outward.
Which quantity does a brake system ultimately reduce?
A Wheelbase
B Spring rate
C Vehicle speed
D Fuel octane
Answer: C. Vehicle speed. Brake force at the tire-road contact slows the vehicle.