Difficulty: Easy & Basic
What does an automotive electronic control unit do?
A Stores fuel mechanically
B Supports vehicle weight
C Cools the radiator
D Processes inputs and commands outputs
Answer: D. Processes inputs and commands outputs. An ECU uses sensor information and programmed logic to control actuators and vehicle functions.
What does a vehicle sensor provide to a controller?
A Mechanical braking force
B Fuel pressure only
C Tire contact area
D Measurement signal
Answer: D. Measurement signal. A sensor converts a physical quantity into a signal that an electronic controller can interpret.
What does an actuator do in an electronic system?
A Measures road roughness
B Stores diagnostic codes
C Filters engine oil
D Changes command into action
Answer: D. Changes command into action. An actuator converts an electrical command into a physical output such as motion, flow, or force.
Which circuit converts analog sensor voltage into digital data?
A Voltage regulator
B Analog-to-digital converter
C CAN transceiver
D Power relay
Answer: B. Analog-to-digital converter. An ADC samples an analog voltage and represents it as a digital number.
How is a digital signal represented?
A Continuous voltage only
B Mechanical pressure
C Discrete logic states
D Changing tire radius
Answer: C. Discrete logic states. Digital systems represent information using discrete states, commonly logical zero and one.
What kind of value does an analog sensor signal vary through?
A Continuous range
B Only two states
C Fixed gear ratios
D One stored code
Answer: A. Continuous range. An analog signal can vary continuously across a voltage or current range.
What does feedback provide in closed-loop control?
A Only the target value
B Battery reserve capacity
C Measured output information
D A mechanical gear ratio
Answer: C. Measured output information. Feedback returns measured system behavior so the controller can compare it with the desired value.
How does a closed-loop controller use a sensor?
A Ignores measured output
B Only switches headlights
C Compares output with target
D Changes wheelbase
Answer: C. Compares output with target. The controller uses feedback to calculate error and adjust its output.
Which sensor reports throttle-plate position?
A Throttle-position sensor
B Coolant-level sensor
C Wheel-bearing sensor
D Brake-pad sensor
Answer: A. Throttle-position sensor. A throttle-position sensor measures throttle-plate angle for engine control.
What does a crankshaft-position sensor help determine?
A Fuel-tank volume
B Brake-fluid level
C Vehicle paint color
D Engine speed and position
Answer: D. Engine speed and position. Crankshaft-position information lets the controller determine engine speed and crank angle.
Which sensor can identify camshaft phase?
A Ambient-light sensor
B Oil-level sensor
C Camshaft-position sensor
D Seat-occupancy sensor
Answer: C. Camshaft-position sensor. Camshaft position helps identify valve timing phase and cylinder sequence.
What does an engine coolant-temperature sensor measure?
A Fuel octane
B Coolant temperature
C Wheel speed
D Exhaust pressure
Answer: B. Coolant temperature. The sensor reports engine coolant temperature so control strategies can account for warm-up and operating heat.
An oxygen sensor mainly detects oxygen in which stream?
A Intake coolant
B Fuel tank vapor
C Brake fluid
D Exhaust gas
Answer: D. Exhaust gas. An exhaust oxygen sensor measures oxygen content to support mixture and emissions control.
Which sensor measures incoming air mass flow?
A Throttle switch
B Mass-airflow sensor
C Knock sensor
D Crank sensor
Answer: B. Mass-airflow sensor. A mass-airflow sensor estimates the mass of air entering the engine.
What does a manifold-pressure sensor measure?
A Exhaust oxygen only
B Intake absolute pressure
C Battery current
D Tire pressure
Answer: B. Intake absolute pressure. A MAP sensor measures absolute pressure in the intake manifold.
Which sensor detects abnormal combustion vibration?
A Rain sensor
B Fuel-level sender
C Knock sensor
D Yaw-rate sensor
Answer: C. Knock sensor. A knock sensor senses engine-block vibration associated with abnormal combustion.
What does an electronic fuel injector control?
A Fuel delivery
B Wheel alignment
C Brake cooling
D Steering ratio
Answer: A. Fuel delivery. The ECU energizes the injector to meter fuel into the engine.
Which actuator can position an electronic throttle plate?
A Throttle motor
B Ride-height sensor
C CAN resistor
D Brake lamp
Answer: A. Throttle motor. An electronic throttle actuator moves the throttle plate in response to controller commands.
A Hall-effect wheel sensor commonly produces what output?
A Hydraulic pressure
B Fuel vapor
C Mechanical torque
D Switching electrical signal
Answer: D. Switching electrical signal. Many automotive Hall sensors provide a switching output as a magnetic target passes the sensor.
How does a variable-reluctance sensor generate its signal?
A Changing magnetic flux
B Piezoelectric pressure
C Optical reflection
D Capacitive touch
Answer: A. Changing magnetic flux. Movement of a toothed target changes magnetic flux and induces an alternating voltage in the sensor coil.
Which sensor element commonly responds to engine knock vibration?
A Thermocouple junction
B Piezoelectric element
C Photoresistor
D Float switch
Answer: B. Piezoelectric element. Piezoelectric material produces an electrical signal when mechanical stress or vibration acts on it.
What is a vehicle CAN bus used for?
A Fuel filtration
B Brake cooling
C Module communication
D Spring support
Answer: C. Module communication. CAN allows electronic control modules to exchange messages over a shared vehicle network.
Why can several ECUs share network data?
A Messages carry identifiers
B Each ECU needs separate wiring
C Only one sensor can connect
D Voltage is always zero
Answer: A. Messages carry identifiers. Network messages include identifiers so receiving modules can recognize relevant information.
What does a diagnostic trouble code identify?
A Detected fault category
B Exact failed part always
C Vehicle owner
D Fuel grade
Answer: A. Detected fault category. A DTC describes a detected fault condition, but it does not always prove which part failed.
Where does a scan tool connect for vehicle diagnostics?
A Alternator pulley
B Diagnostic link connector
C Fuel rail
D Steering knuckle
Answer: B. Diagnostic link connector. A scan tool communicates with vehicle electronics through the diagnostic link connector.