Aircraft Propulsion MCQs (Set-4)

Difficulty: Hard

A matched nozzle passes 30 kg/s from 520 to 220 m/s. What is ideal net thrust?

A 6 kN
B 9 kN
C 12 kN
D 15 kN

Exit pressure is 120 kPa, ambient 100 kPa, exit area 0.5 m². Pressure thrust?

A 10 kN
B 1 kN
C 5 kN
D 20 kN

At 240 m/s flight speed and 560 m/s jet speed, ideal propulsive efficiency?

A 40%
B 50%
C 60%
D 80%

Fuel flow is 0.72 kg/s for 18 kN thrust. What is TSFC?

A 2 × 10⁻⁵ kg/N·s
B 3 × 10⁻⁵ kg/N·s
C 5 × 10⁻⁵ kg/N·s
D 4 × 10⁻⁵ kg/N·s

Compressor pressure rises from 100 kPa to 1.6 MPa. Pressure ratio?

A 8
B 16
C 1.6
D 160

A 12 kg/s turbine flow drops 120 kJ/kg. Shaft power?

A 0.12 MW
B 12 MW
C 1.44 MW
D 144 MW

Bypass flow is 180 kg/s and core flow 45 kg/s. Bypass ratio?

A 4
B 3
C 5
D 8

At 200 m/s flight and 500 m/s exhaust, ideal specific thrust?

A 200 N·s/kg
B 250 N·s/kg
C 500 N·s/kg
D 300 N·s/kg

Gross thrust is 42 kN and ram drag 8 kN. Net thrust?

A 50 kN
B 34 kN
C 42 kN
D 8 kN

Which limit most directly constrains turbine inlet temperature?

A Blade material capability
B Wing loading
C Landing speed
D Propeller diameter

A turbofan bypasses 400 kg/s at bypass ratio 8. Core flow?

A 25 kg/s
B 40 kg/s
C 60 kg/s
D 50 kg/s

Exit pressure is 95 kPa, ambient 100 kPa, area 0.8 m². Pressure term?

A +4 kN
B +0.4 kN
C −4 kN
D −40 kN

A propeller advances 75 m/s at 25 rev/s with 3 m diameter. Advance ratio?

A 0.5
B 1.0
C 1.5
D 2.0

A 2 m propeller rotates at 30 rev/s. Approximate rotational tip speed?

A 188 m/s
B 94 m/s
C 240 m/s
D 377 m/s

Three compressor stages each have pressure ratio 1.5. Overall ratio?

A 2.25
B 4.5
C 3.375
D 6.75

Airflow is 80 kg/s and net thrust 24 kN. Specific thrust?

A 240 N·s/kg
B 250 N·s/kg
C 280 N·s/kg
D 300 N·s/kg

At 250 m/s flight speed and 750 m/s jet speed, ideal propulsive efficiency?

A 40%
B 50%
C 60%
D 75%

Why does compressor bleed reduce core thrust potential?

A It raises bypass ratio
B It removes inlet drag
C Less air reaches combustor
D It increases fan diameter

What does afterburning do to nozzle-entry total temperature?

A Raises it
B Lowers it
C Leaves it fixed
D Makes it zero

Why can a turbojet be inefficient at low subsonic speed?

A Low bypass flow
B Weak compressor
C No exhaust nozzle
D Large jet-speed excess

A compressor operating line approaches surge line. What decreases?

A Bypass ratio
B Fuel heating value
C Nozzle area
D Stall margin

Which formula gives approximate propeller rotational tip speed?

A πDn
B V/nD
C ṁVe
D pA/ṁ

What is a key benefit of separate engine spools?

A No compressor work
B Zero turbine temperature
C Independent speed matching
D No fuel control

A 15 kg/s jet flow gains 280 m/s velocity. Momentum thrust?

A 3.2 kN
B 4.2 kN
C 5.6 kN
D 7.0 kN

Which quantity enters the nozzle pressure-thrust term?

A ṁfuelVe
B V0/Ae
C ṁair/p0
D (pe − p0)Ae