Difficulty: Medium
When exit pressure matches ambient pressure, which thrust term vanishes?
A Pressure-area term
B Ram drag
C Gross thrust
D Fuel flow
Answer: A. Pressure-area term. The pressure-area contribution is zero when nozzle exit pressure equals ambient pressure.
What is the ideal propulsive efficiency of a simple jet?
A (Ve+V0)/2V0
B Ve/V0
C 2V0/(Ve+V0)
D V0/Ve
Answer: C. 2V0/(Ve+V0). For an ideal jet with matched pressure, propulsive efficiency is 2V0 divided by Ve plus V0.
Why can a high-bypass engine improve subsonic efficiency?
A It burns no fuel
B It accelerates more air gently
C It eliminates inlet drag
D It stops exhaust flow
Answer: B. It accelerates more air gently. A large air mass with a smaller velocity increase can provide thrust efficiently.
What happens to air stagnation temperature in a compressor?
A It decreases
B It stays fixed
C It becomes zero
D It increases
Answer: D. It increases. Compressor work raises the air’s total temperature and pressure.
Combustion in a gas turbine is ideally treated as what?
A Constant-pressure heat addition
B Constant-volume cooling
C Isothermal expansion
D Adiabatic compression
Answer: A. Constant-pressure heat addition. The ideal Brayton cycle models heat addition at constant pressure.
Which shaft links compressor and turbine in a single-spool engine?
A Fan duct
B Main shaft
C Fuel line
D Exhaust cone
Answer: B. Main shaft. The turbine drives the compressor through a mechanical shaft.
A convergent nozzle chokes when its throat flow reaches what?
A Mach 0.3
B Mach 0.5
C Mach 2
D Mach 1
Answer: D. Mach 1. At choking, the flow reaches Mach 1 at the minimum area.
What do supersonic inlet ramps manage?
A Fuel-air ratio
B Turbine cooling
C Shock position
D Propeller pitch
Answer: C. Shock position. Variable inlet geometry positions shocks to control supersonic compression.
Compressor stall commonly involves what flow behavior?
A Flow separation
B Fuel detonation
C Nozzle freezing
D Shaft reversal
Answer: A. Flow separation. Stall occurs when compressor flow separates from blade surfaces.
Compressor surge is best described as what?
A Steady high flow
B Normal ignition
C Unstable system-wide flow
D Turbine overspeed only
Answer: C. Unstable system-wide flow. Surge is an unstable compressor-system event that can include severe flow oscillation or reversal.
On a compressor map, what boundary marks instability?
A Choke line
B Surge line
C Fuel line
D Idle line
Answer: B. Surge line. The surge line marks the boundary beyond which stable compressor operation is lost.
A multi-spool engine has how many independently rotating shaft groups?
A Exactly one
B None
C Only a propeller
D Two or more
Answer: D. Two or more. Multi-spool engines use separate rotating assemblies at different speeds.
Why is fan pressure ratio often modest in a high-bypass engine?
A To keep bypass flow efficient
B To stop all core flow
C To ignite fuel earlier
D To raise ram drag
Answer: A. To keep bypass flow efficient. A modest fan pressure rise supports efficient acceleration of a large bypass stream.
Bypass ratio is the bypass mass flow divided by which flow?
A Fuel flow
B Exhaust temperature
C Core mass flow
D Fan speed
Answer: C. Core mass flow. Bypass ratio compares mass flow around the core with core mass flow.
Specific thrust means thrust per what?
A Unit fuel volume
B Unit mass flow
C Unit wing area
D Unit time
Answer: B. Unit mass flow. Specific thrust is net thrust divided by engine air mass flow.
Compressor pressure ratio is outlet total pressure divided by what?
A Ambient temperature
B Fuel pressure
C Exit velocity
D Inlet total pressure
Answer: D. Inlet total pressure. Compressor pressure ratio compares outlet and inlet total pressures.
Why are turbine blades cooled in high-temperature engines?
A To protect blade materials
B To increase fan diameter
C To reduce inlet area
D To freeze fuel
Answer: A. To protect blade materials. Cooling keeps turbine metal within its allowable temperature limits.
What does an afterburner primarily raise?
A Bypass ratio
B Exhaust total temperature
C Compressor efficiency
D Inlet mass
Answer: B. Exhaust total temperature. Additional combustion raises exhaust temperature and can increase thrust.
When exit pressure differs from ambient, what also contributes to thrust?
A Wing lift
B Fuel gravity
C Pressure-area force
D Shaft torque
Answer: C. Pressure-area force. The thrust equation includes an exit pressure difference multiplied by exit area.
At fixed mass flow, why does raising jet speed increase thrust?
A Lower fuel density
B Smaller inlet
C Reduced aircraft weight
D Greater momentum change
Answer: D. Greater momentum change. A larger exhaust-to-flight velocity difference raises momentum thrust.
What is ram drag in a jet-engine thrust balance?
A Incoming air momentum
B Nozzle pressure force
C Turbine torque
D Fuel heating
Answer: A. Incoming air momentum. Ram drag is the incoming mass flow multiplied by flight speed.
Why does a two-spool engine use separate shafts?
A It removes the combustor
B Different groups can run optimally
C It needs no starter
D It prevents bypass flow
Answer: B. Different groups can run optimally. Separate spools let compressor sections operate at different rotational speeds.
How is gross thrust distinguished from net thrust?
A Gross subtracts lift
B Net ignores exhaust
C Net subtracts ram drag
D Gross includes aircraft weight
Answer: C. Net subtracts ram drag. Net thrust equals gross exhaust thrust minus inlet momentum drag.
Which component controls fuel flow to maintain engine power?
A Diffuser
B Exhaust mixer
C Inlet guide vane
D Fuel control unit
Answer: D. Fuel control unit. The fuel control meters fuel in response to engine operating demands.
Why can inlet pressure recovery matter to thrust?
A It sets wing loading
B It affects compressor-face pressure
C It changes runway length
D It stops combustion
Answer: B. It affects compressor-face pressure. Inlet losses reduce pressure available to the engine and can lower performance.