Difficulty: Easy & Basic
What does bypass air flow around?
A The cockpit
B The exhaust cone
C The tail
D The core
Answer: D. The core. Turbofan bypass air flows around the gas-generator core.
Which ratio describes propeller advance?
A Pressure ratio
B Bypass ratio
C Advance ratio
D Compression ratio
Answer: C. Advance ratio. Advance ratio relates aircraft speed to propeller speed and diameter.
Which gas-turbine part produces shaft work?
A Turbine
B Inlet
C Nozzle
D Combustor
Answer: A. Turbine. The turbine extracts energy from hot gas to produce shaft work.
Most turbojet thrust comes from which flow?
A Cooling air
B Exhaust jet
C Fuel spray
D Oil return
Answer: B. Exhaust jet. A turbojet derives most thrust from its high-speed exhaust jet.
Thrust-specific fuel consumption relates fuel flow to what?
A Wing area
B Aircraft mass
C Thrust
D Air temperature
Answer: C. Thrust. It is fuel mass flow divided by engine thrust.
Which inlet feature helps slow supersonic air?
A Gearbox
B Fuel injector
C Propeller
D Diffuser
Answer: D. Diffuser. A diffuser slows the flow and raises its static pressure.
Why are propeller blades twisted?
A To store fuel
B To maintain blade angle
C To shorten shafts
D To cool exhaust
Answer: B. To maintain blade angle. Twist helps maintain a useful angle of attack along the blade.
A free power turbine is separate from which assembly?
A Gas generator
B Landing gear
C Propeller blades
D Fuel tank
Answer: A. Gas generator. A free turbine drives a load independently of the gas-generator shaft.
At low speed, high-bypass turbofan thrust mainly comes from what?
A Core exhaust only
B Afterburning
C Rocket exhaust
D Bypass flow
Answer: D. Bypass flow. A large mass of bypass air provides much of the thrust.
Why cannot a ramjet produce static thrust?
A It has no fuel
B It has no nozzle
C It needs forward airflow
D It has no combustion
Answer: C. It needs forward airflow. A ramjet needs forward motion to compress air through ram pressure.
What is a common afterburner drawback?
A Low exhaust speed
B High fuel use
C No thrust increase
D Water consumption
Answer: B. High fuel use. Afterburners add thrust but consume fuel rapidly.
Turbine pressure ratio compares inlet pressure with what?
A Outlet pressure
B Fuel pressure
C Ambient humidity
D Fan diameter
Answer: A. Outlet pressure. The ratio uses total pressure at turbine inlet and exit.
Which system provides short-duration extra jet thrust?
A Intercooler
B Reverser
C Oil pump
D Afterburner
Answer: D. Afterburner. An afterburner burns extra fuel in exhaust to raise thrust.
What distinguishes turbofan bypass flow?
A It drives the turbine
B It avoids the combustor
C It carries oil
D It cools the gearbox
Answer: B. It avoids the combustor. Bypass air passes around the core rather than through the combustor.
In an axial compressor, air travels mainly how?
A Radially outward
B Backward only
C Parallel to shaft
D Across the wing
Answer: C. Parallel to shaft. An axial compressor moves air chiefly parallel to its shaft.
A centrifugal compressor sends air mainly where?
A Radially outward
B Along the shaft
C Toward the inlet
D Into the fuel tank
Answer: A. Radially outward. The impeller accelerates air outward from its center.
How does a propeller generate useful thrust?
A Heating the cabin
B Accelerating air rearward
C Compressing fuel
D Slowing the aircraft
Answer: B. Accelerating air rearward. The propeller imparts rearward momentum to air and receives a forward reaction.
Why use a geared turbofan?
A To increase ram drag
B To stop bypass flow
C To eliminate turbines
D To reduce fan speed
Answer: D. To reduce fan speed. A gearbox lets fan and turbine run at different optimal speeds.
What can a variable-area nozzle accommodate?
A Wing sweep
B Fuel storage
C Afterburner flow changes
D Landing loads
Answer: C. Afterburner flow changes. The nozzle opens to pass increased hot-gas flow during afterburning.
In a ramjet, air is compressed primarily by what?
A Ram pressure
B A piston
C A compressor rotor
D A propeller
Answer: A. Ram pressure. Forward motion compresses captured air before combustion.
For good propulsive efficiency, jet speed should be what?
A Far above flight speed
B Near flight speed
C Zero at exit
D Unrelated to speed
Answer: B. Near flight speed. For a given thrust, a smaller speed increase applied to more air is efficient.
What limits propeller blade tip speed at high RPM?
A Oil pressure
B Fuel quality
C Compressibility effects
D Combustor heat
Answer: C. Compressibility effects. High tip Mach numbers increase compressibility losses and noise.
A turbine extracts energy to drive which loads?
A Wing flaps
B Landing wheels
C Cabin doors
D Compressor and accessories
Answer: D. Compressor and accessories. Turbine power drives the compressor and engine accessories.
What does a rocket nozzle expand?
A Combustion gas
B Inlet air
C Cooling water
D Lubricating oil
Answer: A. Combustion gas. A rocket nozzle expands hot combustion products into a high-speed exhaust.
A turboprop is generally effective at which speeds?
A Hypersonic
B Low-to-moderate subsonic
C Orbital
D Supersonic only
Answer: B. Low-to-moderate subsonic. Turboprops are efficient at lower subsonic flight speeds.