Aircraft Materials MCQs (Set-1)

Difficulty: Easy & Basic

Which property resists permanent indentation?

A Ductility
B Hardness
C Elasticity
D Density

Which material offers high strength at low mass?

A Cast iron
B Copper alloy
C Carbon-fiber composite
D Lead sheet

Which metal is common in aircraft skins?

A Aluminum alloy
B Gray iron
C Brass
D Pure lead

What defines a composite material?

A One pure element
B One metal phase
C A single polymer
D Combined material constituents

What does a composite matrix do?

A Cuts the fibers
B Binds and supports fibers
C Measures hardness
D Stores fuel

Why use carbon-fiber composites in aircraft?

A High stiffness, low mass
B Low strength, high mass
C High corrosion rate
D Low fatigue resistance

Which material family suits hot turbine sections?

A Pure aluminum
B Soft copper
C Nickel superalloys
D Natural rubber

What is fatigue damage caused by?

A One static load
B Repeated stress cycles
C Low air density
D Surface color change

Corrosion is the deterioration of material by what?

A Elastic stretching
B Magnetic attraction
C Thermal expansion
D Chemical or electrochemical action

Ductility describes the ability to do what?

A Deform plastically in tension
B Resist all heating
C Float in water
D Reflect sound

Yield strength marks the start of what?

A Elastic recovery
B Thermal expansion
C Permanent deformation
D Surface polishing

What does elastic modulus measure?

A Corrosion rate
B Mass density
C Surface roughness
D Elastic stiffness

What does a honeycomb core provide?

A High fuel pressure
B Stiffness at low mass
C Electrical insulation only
D Thermal melting

A laminate is built from what?

A Loose metal powder
B One thick coating
C Stacked material plies
D Woven cables only

What is delamination in a composite?

A Separation between layers
B Rust beneath paint
C Plastic surface melting
D Fiber color change

Galvanic corrosion needs dissimilar metals plus what?

A High vacuum
B Dry nitrogen
C Thermal insulation
D Electrical contact and electrolyte

Which material combines low density and corrosion resistance?

A Gray cast iron
B Pure copper
C Titanium alloy
D Carbon steel

Why is steel used in highly loaded fittings?

A Lowest density
B High strength
C Best transparency
D No fatigue risk

Toughness describes resistance to what?

A Fracture with energy absorption
B Elastic stretching only
C Thermal conduction
D Surface oxidation

Creep is time-dependent deformation under sustained stress and what?

A Low humidity
B High illumination
C Zero load
D Elevated temperature

Engineering normal stress equals which ratio?

A Force divided by area
B Area divided by force
C Mass times speed
D Length over time

CFRP combines carbon fibers with what?

A Steel foam
B Glass beads
C Polymer matrix
D Copper mesh

What reinforcement is used in fiberglass?

A Carbon sheets
B Glass fibers
C Steel wires
D Aluminum flakes

Nondestructive inspection aims to find defects while doing what?

A Breaking the specimen
B Removing all coatings
C Changing alloy chemistry
D Preserving the part

What does Alclad protect an aluminum alloy with?

A Nickel foam core
B Steel mesh coating
C Pure aluminum surface layer
D Rubber outer skin