Weathering MCQs (Set-3)

Difficulty: Medium

A limestone pore water reaches calcite saturation. Further net dissolution will usually:

A Speed up sharply
B Create fresh lava
C Slow down
D Form more pores

Why can flowing groundwater sustain chemical weathering for longer?

A It removes dissolved products
B It seals all fractures
C It stops mineral contact
D It freezes pore water

A steep rainy hillslope has little regolith. The most likely reason is:

A No weathering occurs
B Clay forms too quickly
C Bedrock blocks rain
D Removal exceeds production

A rock has many pores, but most are isolated. It likely has:

A Low porosity, high flow
B High porosity, low permeability
C High porosity, high flow
D Low porosity, low strength

Two minerals in one outcrop alter at different rates mainly because their:

A Compositions differ
B Ages are identical
C Colors are different
D Locations match

In waterlogged, oxygen-poor soil, oxidation of iron minerals generally:

A Becomes the only process
B Produces more frost
C Stops all dissolution
D Becomes limited

When pyrite in mine waste reacts with air and water, runoff may become:

A Acidic
B Saline
C Alkaline
D Frozen

Carbon dioxide from roots and microbes dissolves in soil water and tends to:

A Raise its pH
B Lower its pH
C Remove all oxygen
D Freeze the water

A stream carries dissolved sodium and silica from a granitic catchment. These solutes most likely reflect:

A Glacial polishing
B Wind abrasion
C Salt wedging
D Silicate weathering

A reddish-brown coating on iron-bearing rock most directly indicates:

A Salt crystallization
B Clay swelling
C Iron oxidation
D Frost shattering

A weathering mantle thickens when, over time:

A Removal exceeds production
B Production exceeds removal
C Bedrock melts upward
D No water can enter

Hydration of anhydrite to gypsum can contribute to rock breakdown because it:

A Expands the mineral
B Removes all iron
C Creates quartz grains
D Stops water flow

A dilute acidic solution moves through limestone. The most likely immediate change is:

A Quartz melting
B Clay compaction
C Salt freezing
D Calcite dissolving

The chemistry of weathering water is most likely to change when it:

A Avoids every mineral
B Contacts reactive rock
C Contains only ice
D Has no dissolved gas

In an old basalt profile, iron-rich residual soil forms under strong leaching. This points to:

A Wind deposition
B Glacial till
C Marine flooding
D Intense chemical alteration

A chemical reaction releases ions from rock into groundwater. Those ions are part of the:

A Dissolved load
B Bed load
C Suspended load
D Talus cone

Why can weathering proceed faster along a grain boundary than through an intact crystal?

A It blocks all water
B It removes oxygen
C It exposes a reactive interface
D It raises rock density

A weathered profile has a gray matrix with rusty mottles after wetting and drying. This pattern suggests:

A Uniform frost action
B Changing redox conditions
C Only wind erosion
D New lava intrusion

If water infiltrates a rock but cannot drain away, chemical weathering may slow as the water:

A Becomes more fractured
B Loses all minerals
C Approaches saturation
D Turns into magma

A calcite-cemented sandstone becomes friable after repeated acidic seepage. The likely cause is:

A Cement dissolution
B Quartz melting
C Root growth only
D Glacial abrasion

Which setting is most likely to support deep chemical alteration of bedrock?

A Dry, impermeable ridge
B Cold, frozen plain
C Warm, well-drained upland
D Fresh gravel bar

If a mineral’s structure is especially stable at Earth’s surface, it tends to:

A Dissolve immediately
B Persist in weathered residue
C Become a clay instantly
D Turn into salt

A thick altered layer develops beneath a stable surface while nearby slopes remain bare. The key contrast is:

A Different erosion rates
B Different gravity
C Different rock ages only
D Different ocean levels

A mineral reaction produces dissolved ions and a new solid clay. The clay is a:

A Primary magma
B Transported pebble
C Secondary mineral
D Bedrock joint

Which stream measurement best integrates exported chemical weathering products?

A Dissolved ion flux
B Cliff height
C Grain roundness
D Wind speed