During repeated freezing, water in a joint widens it mainly by:
A Dissolving quartz
B Oxidizing iron
C Expanding as ice
D Forming calcite
Answer: C. Expanding as ice. Water enters a crack and freezes when temperatures fall below the freezing point. Ice expansion can press against the crack walls; repeated freeze and thaw cycles gradually widen the joint and loosen fragments.
Root wedging occurs when:
A Roots widen rock cracks
B Rain deposits clay
C Wind polishes sand
D Heat melts minerals
Answer: A. Roots widen rock cracks. Plant roots can enter pre-existing openings in rock. As roots grow thicker, they exert pressure on the crack walls, widening fractures and sometimes separating blocks without changing the minerals chemically.
Salt weathering is promoted when:
A Lava cools underground
B Roots stop growing
C Quartz melts in sunlight
D Crystals grow in pores
Answer: D. Crystals grow in pores. Saline water can move into pores and fractures, then evaporate. Salt crystals grow during drying and can exert pressure on pore walls, gradually loosening grains and producing cavities or honeycomb textures.
Mechanical weathering mainly involves:
A Minerals forming new compounds
B Breaking rock into pieces
C Sediment moving downstream
D Rock melting below ground
Answer: B. Breaking rock into pieces. Mechanical weathering disintegrates rock into smaller fragments while leaving most mineral chemistry unchanged. It increases exposed surface area, which can make later chemical reactions more effective. This distinction separates it from chemical alteration.
Hydrolysis commonly changes feldspar into:
A Clay minerals
B Native copper
C Halite crystals
D Volcanic glass
Answer: A. Clay minerals. During hydrolysis, water reacts with silicate minerals such as feldspar. Some original ions are removed in solution while new, softer clay minerals form, helping the rock become weaker and more crumbly.
Oxidation weathering most directly affects:
A Pure quartz grains
B Calcite crystals
C Iron-bearing minerals
D Rock salt layers
Answer: C. Iron-bearing minerals. Oxidation involves reactions with oxygen and is common in iron-bearing minerals. It can form iron oxides that stain rock reddish or yellowish and can weaken the original mineral framework. This process does not itself transport the material.
Carbonation can dissolve calcite because rainwater contains:
A Dissolved sodium chloride
B Carbonic acid
C Liquid oxygen
D Molten silica
Answer: B. Carbonic acid. Carbon dioxide dissolves in water to form weak carbonic acid. This acidic water reacts with calcite and carries dissolved material away, so carbonation is especially important in limestone and other carbonate rocks.
Exfoliation is recognized by:
A Pebbles rounding in rivers
B Grains dissolving in acid
C Sediment settling in lakes
D Curved outer sheets peeling
Answer: D. Curved outer sheets peeling. Exfoliation describes the peeling or separation of curved outer rock sheets roughly parallel to the surface. Pressure release and other stress changes can contribute, exposing fresh surfaces to further weathering.
Grus is best described as:
A Coarse granitic sand
B Compacted river mud
C Volcanic ash glass
D Glacially polished bedrock
Answer: A. Coarse granitic sand. Grus is loose, coarse granular material produced as granite disintegrates. Quartz and feldspar grains often remain recognizable, and wind or water can carry the particles away from the outcrop. It often collects at the base of granite outcrops.
Tafoni commonly appear as:
A Parallel glacial grooves
B Rounded lava pillows
C Honeycomb-like rock hollows
D Straight fault scarps
Answer: C. Honeycomb-like rock hollows. Tafoni are small rounded cavities that can enlarge through focused weathering. Moisture and salts may accumulate in sheltered pockets, while more resistant surface bands remain as ridges between hollows. These textures occur on some sandstone and granite surfaces.
Spheroidal weathering often turns jointed blocks into:
A Flat sediment layers
B Angular talus only
C Vertical rock needles
D Rounded blocks
Answer: D. Rounded blocks. Water and chemical reactions commonly reach a jointed block along its corners and edges. These parts weather faster, so the remaining rock becomes progressively rounded as surrounding altered material is removed.
Solution weathering occurs when:
A Ice scrapes a cliff
B Water dissolves soluble minerals
C Roots split a joint
D Wind lifts loose dust
Answer: B. Water dissolves soluble minerals. Solution is chemical weathering in which water removes soluble mineral compounds. The dissolved load is carried in water, so this process can enlarge openings in rocks such as limestone, gypsum, or halite.
Repeated heating and cooling can weather rock through:
A Thermal expansion and contraction
B Carbonate precipitation
C Glacier deposition
D Magma crystallization
Answer: A. Thermal expansion and contraction. Minerals expand and contract as temperature changes, and different minerals may respond by different amounts. Repeated stress can loosen grains and promote surface cracking, especially where daily temperature ranges are large.
Lichens can chemically weather rock by releasing:
A Pure nitrogen gas
B Molten carbonate
C Organic acids
D Fresh lava
Answer: C. Organic acids. Lichens attach to rock surfaces and can release organic acids as they grow. These acids react with minerals and help loosen particles, while the organism also shelters moisture against the rock.
Frost action is most effective where:
A Rock stays warm
B Water and freeze-thaw cycles occur
C No fractures exist
D Only dry wind blows
Answer: B. Water and freeze-thaw cycles occur. Frost wedging needs water to enter pores or cracks and temperatures to move through freezing and thawing conditions. Repeated cycles can gradually enlarge openings and detach rock fragments. Its effectiveness depends on available water and temperature range.
Regolith refers broadly to:
A Fresh magma underground
B A single mineral vein
C Oceanic crust only
D Loose surface mantle
Answer: D. Loose surface mantle. Regolith is the loose, weathered material that overlies solid bedrock. It may include soil, weathered rock, sediment, and other unconsolidated material formed in place or moved onto the surface. Thickness and composition vary with local conditions.
Saprolite is weathered rock that:
A Retains original rock structures
B Has become fresh lava
C Contains only river gravel
D Forms only at coastlines
Answer: A. Retains original rock structures. Saprolite has decomposed substantially but still preserves features of its parent rock, such as joints or foliation. It forms in place as fluids react with bedrock during prolonged chemical weathering.
Burrowing animals can contribute to weathering by:
A Disaggregating soil and rock
B Depositing lava flows
C Removing all rainfall
D Creating new bedrock
Answer: A. Disaggregating soil and rock. Animals that burrow loosen and disturb soil and weathered rock. Their activity exposes fresh surfaces, opens pathways for water and air, and can make physical breakdown proceed more readily. This is one way organisms influence the land surface.
A densely jointed rock surface usually weathers faster because it has:
A Fewer water pathways
B Less contact with air
C More connected fractures
D Higher mineral hardness
Answer: C. More connected fractures. Joints create pathways through which water and dissolved substances can penetrate. More connected fractures expose greater rock surface area to weathering agents and allow altered material to be removed more easily.
Chemical weathering generally increases when water carries:
A Dry quartz grains
B Dissolved acids
C Frozen sediment
D Air bubbles only
Answer: B. Dissolved acids. Water is a major medium for chemical reactions at Earth surfaces. Acids and dissolved ions can react with minerals, and flowing water can remove reaction products so fresh mineral surfaces remain exposed.
Which common mineral is highly resistant to chemical weathering?
A Olivine
B Calcite
C Quartz
D Halite
Answer: C. Quartz. Quartz is relatively resistant under many near-surface conditions compared with minerals such as olivine, feldspar, or calcite. It therefore commonly persists as a residual grain after less stable minerals alter.
In a dry desert, chemical weathering often proceeds slowly mainly because:
A Water is scarce
B Oxygen is absent
C Gravity stops acting
D Quartz melts quickly
Answer: A. Water is scarce. Many chemical reactions require water or dissolved substances to move through rock. Arid settings have limited moisture, so chemical breakdown is often slower than in comparable humid environments. Mechanical breakdown can still remain active.
Warm, moist conditions often favor chemical weathering because they provide:
A Less mineral exposure
B More water and reaction energy
C Permanent surface frost
D No chemical transport
Answer: B. More water and reaction energy. Moisture supports reactions and transports dissolved products, while warmth commonly increases reaction rates. Together these conditions can intensify chemical alteration, although rock type, drainage, and other factors also matter. Organisms and drainage also modify local rates.
Differential weathering can create uneven relief when rocks have:
A Identical resistance
B No mineral differences
C Uniform joint spacing
D Unequal resistance to weathering
Answer: D. Unequal resistance to weathering. Where rock layers differ in mineral composition, cement, or fracture patterns, they do not weather at equal rates. More resistant material may remain as ridges or ledges beside weaker, lowered rock.
Why do block edges often weather faster than interiors?
A They receive less water
B They are shielded by soil
C They contain no minerals
D Exposed on several sides
Answer: D. Exposed on several sides. Water and reactive solutions reach corners and edges from several directions, increasing contact area. Faster alteration rounds block edges first, a common early stage of spheroidal weathering. Corners can receive water from multiple directions at once.