For isotropic elasticity, shear modulus G equals…
A E(1+ν)
B 2E/(1−ν)
C E/[2(1+ν)]
D ν/E
Answer: C. E/[2(1+ν)]. For a linear isotropic material, E = 2G(1+ν).
Bulk modulus relates pressure to…
A Axial rotation
B Shear force
C Beam curvature
D Volumetric strain
Answer: D. Volumetric strain. Bulk modulus measures resistance to uniform volumetric compression.
Resilience is energy absorbed…
A Within elastic limit
B After complete fracture
C Only by friction
D During free expansion
Answer: A. Within elastic limit. Modulus of resilience is elastic strain energy per unit volume up to yielding.
Toughness is energy absorbed…
A Only before yielding
B During zero load
C Before fracture
D By a rigid body
Answer: C. Before fracture. Toughness is the energy absorbed per unit volume through fracture.
A stress concentration occurs near…
A A uniform straight segment
B A free rigid body
C An unloaded neutral axis
D A geometric discontinuity
Answer: D. A geometric discontinuity. Holes, notches and abrupt changes can intensify local stress.
A strain gauge measures…
A Internal force directly
B Young’s modulus directly
C Crack depth only
D Surface strain
Answer: D. Surface strain. A bonded resistance strain gauge changes electrical resistance as the surface strains.
In linear elasticity, stiffness means…
A Displacement per force
B Stress per area
C Force per displacement
D Length per temperature
Answer: C. Force per displacement. Structural stiffness relates applied force to resulting displacement.
The section modulus is…
A I divided by extreme-fiber distance
B Area divided by length
C J divided by torque
D Moment divided by stress
Answer: A. I divided by extreme-fiber distance. Elastic bending stress equals M/S, where section modulus S = I/c.
For a beam under positive sagging moment, the top fibers are typically…
A In tension
B Unstressed everywhere
C In pure torsion
D In compression
Answer: D. In compression. In standard beam sign convention, sagging bends the beam concave upward and compresses the top fibers.
For a prismatic elastic beam, bending stress varies…
A Uniformly across depth
B Linearly from neutral axis
C With area squared
D Only at supports
Answer: B. Linearly from neutral axis. The flexure formula makes normal bending stress proportional to distance from the neutral axis.
Transverse shear stress in a rectangular beam is largest at…
A The top surface
B The bottom surface
C The neutral axis
D Everywhere equally
Answer: C. The neutral axis. For a rectangular section, transverse shear stress is parabolic and peaks at the neutral axis.
A circular shaft transmits 20 kN·m torque. Torsional rigidity depends on…
A E and area only
B G and J
C ν and length only
D Density and diameter
Answer: B. G and J. The torque-angle relation contains shear modulus G and polar second moment J.
The polar moment J for a solid circular shaft is…
A πd²/4
B πd³/16
C πd⁴/64
D πd⁴/32
Answer: D. πd⁴/32. For a solid circle, J = πd⁴/32 about its longitudinal axis.
Thermal stress develops when expansion is…
A Completely free
B Restrained
C Uniform in vacuum
D Measured with a ruler
Answer: B. Restrained. A temperature change causes stress when deformation is prevented or constrained.
For a fully restrained bar heated by ΔT, stress magnitude is…
A EαΔT
B E/(αΔT)
C α/(EΔT)
D Eα/ΔT²
Answer: A. EαΔT. With full axial restraint, thermal stress magnitude is EαΔT in linear elasticity.
A point of contraflexure is where bending moment…
A Is always maximum
B Changes sign
C Equals shear force
D Becomes axial stress
Answer: B. Changes sign. The bending moment changes sign across a point of contraflexure.
For a beam segment, change in moment relates to…
A Area under load diagram
B Area under shear diagram
C Slope of deflection
D Section modulus
Answer: B. Area under shear diagram. The change in bending moment equals the integral, or signed area, of shear force.
At an interior maximum or minimum moment, shear is generally…
A Always maximum
B Zero or changes sign
C Equal to axial load
D Always negative
Answer: B. Zero or changes sign. Because dM/dx = V, an extremum in moment occurs where shear is zero or changes sign.
A beam’s curvature in elastic bending is proportional to…
A Bending moment
B Support reaction only
C Shear modulus alone
D Axial force only
Answer: A. Bending moment. Euler-Bernoulli beam theory gives curvature M/EI.
An ideal pin support restrains…
A Translation, permits rotation
B Rotation, permits translation
C All motion
D No motion at all
Answer: A. Translation, permits rotation. A pin prevents translation in two directions but allows member rotation.
A roller support ideally restrains…
A One translation direction
B All translation and rotation
C Only rotation
D No translation
Answer: A. One translation direction. A frictionless roller provides one reaction normal to its supporting surface.
A beam’s shear center is the point where transverse load causes…
A Bending without twist
B Pure axial extension
C No shear stress
D Uniform torsion only
Answer: A. Bending without twist. Loading through the shear center avoids twisting from transverse shear loading.
Fatigue failure is associated with…
A One slow static load only
B Uniform heating only
C Repeated or fluctuating stress
D Zero stress
Answer: C. Repeated or fluctuating stress. Fatigue cracks can develop under repeated or fluctuating stress below static strength.
Creep is time-dependent deformation under…
A A single impact only
B No stress
C Sustained load
D Pure cooling only
Answer: C. Sustained load. Creep is gradual deformation under sustained stress, often important at elevated temperature.
For a two-material composite bar bonded together, axial compatibility requires…
A Equal stresses always
B Equal areas always
C Zero axial force
D Equal interface elongation
Answer: D. Equal interface elongation. Perfect bonding enforces compatible axial deformation at the interface.