Difficulty: Medium
For a circular orbit, radius doubles. How does orbital speed change?
A Doubles
B Stays unchanged
C Falls to one quarter
D Falls to 1/β2
Answer: D. Falls to 1/β2. Circular speed is β(ΞΌ/r); doubling radius reduces speed by a factor of 1/β2.
If semi-major axis doubles, Kepler’s third law gives what period ratio?
A 2β2
B 2
C 4
D 8
Answer: A. 2β2. Orbital period scales as a^(3/2), so 2^(3/2)=2β2.
Where is spacecraft speed greatest in an elliptical orbit?
A Apogee
B Ascending node
C Perigee
D Equator crossing
Answer: C. Perigee. A spacecraft moves fastest at perigee, the closest point, conserving angular momentum.
A Hohmann transfer between circular orbits uses how many main burns?
A One
B Two
C Three
D Four
Answer: B. Two. A Hohmann transfer uses one burn to enter the transfer ellipse and another to circularize.
Why is an inclination change usually costly at high orbital speed?
A Solar array stops
B Mass becomes zero
C Large velocity change required
D Orbit period is fixed
Answer: C. Large velocity change required. Changing orbital-plane direction requires a vector change in velocity, which is costly when speed is high.
What does station-keeping compensate for?
A Battery aging only
B Payload motion
C Antenna gain loss
D Orbital perturbations
Answer: D. Orbital perturbations. Station-keeping corrects disturbances that shift a spacecraft from its assigned orbit.
Compared with chemical engines, electric thrusters usually provide what?
A Higher thrust
B High specific impulse
C More propellant flow
D No power demand
Answer: B. High specific impulse. Electric propulsion accelerates propellant efficiently but generally produces lower thrust.
Specific impulse measures what?
A Thrust per propellant weight flow
B Battery energy per mass
C Antenna gain per watt
D Orbit speed per radius
Answer: A. Thrust per propellant weight flow. Specific impulse expresses thrust produced per unit weight-flow of propellant.
What happens to spacecraft body when a reaction wheel accelerates?
A It gains orbit altitude
B It loses mass
C It stops solar input
D It rotates oppositely
Answer: D. It rotates oppositely. The wheel exchanges angular momentum with the spacecraft, causing an equal and opposite body response.
A magnetorquer creates torque by interacting with what?
A Solar pressure
B Planetary magnetic field
C Gravity alone
D Radio signal
Answer: B. Planetary magnetic field. The magnetic dipole generated by a magnetorquer interacts with the ambient magnetic field.
A star tracker can estimate what from star patterns?
A Propellant mass
B Battery temperature
C Spacecraft attitude
D Orbit altitude directly
Answer: C. Spacecraft attitude. Star-field observations provide an inertial reference for attitude estimation.
Why do inertial gyros need periodic reference updates?
A Small errors accumulate
B They consume propellant
C They block telemetry
D They alter orbit
Answer: A. Small errors accumulate. Bias and noise in inertial sensors accumulate into attitude or navigation error.
Why combine star tracker and gyro measurements?
A Increase thrust
B Blend accuracy and rate
C Change orbit plane
D Store more power
Answer: B. Blend accuracy and rate. Gyros provide rapid short-term motion data while star trackers provide accurate absolute references.
During eclipse, what supplies electrical loads?
A Solar array only
B Radiator
C Magnetometer
D Battery
Answer: D. Battery. The battery supplies power when the spacecraft is in planetary shadow and arrays receive no direct sunlight.
What does a solar array need during daylight operations?
A Sun illumination
B Magnetic north
C Radio echo
D High thrust
Answer: A. Sun illumination. Solar cells generate power when illuminated by sunlight.
Why size the battery for eclipse periods?
A Increase antenna gain
B Measure attitude
C Bridge loss of sunlight
D Control propulsion
Answer: C. Bridge loss of sunlight. Stored energy supports spacecraft loads while solar arrays are shaded.
What is a radiator’s best thermal view?
A Warm equipment bay
B Cold space
C Sun-facing panel
D Earth-facing blanket
Answer: B. Cold space. Radiators reject heat most effectively when they have a clear view to cold space.
Why can multilayer insulation reduce heat transfer?
A Adds propellant
B Blocks gravity
C Reflects thermal radiation
D Increases battery voltage
Answer: C. Reflects thermal radiation. Reflective layers reduce radiative heat exchange between spacecraft and its environment.
What is the main advantage of a high-gain antenna?
A Wide omni coverage
B Lower pointing need
C No receiver needed
D Concentrated signal energy
Answer: D. Concentrated signal energy. High antenna gain concentrates transmitted or received energy in a narrower beam.
Which factor increases free-space path loss?
A Greater distance
B Lower data rate
C More battery capacity
D Smaller payload
Answer: A. Greater distance. Free-space path loss grows as radio-wave distance from the transmitter increases.
Why are ground-station contact windows limited?
A Battery is always full
B Spacecraft passes from view
C Payload stops recording
D Orbit has no motion
Answer: B. Spacecraft passes from view. A ground station can communicate when the spacecraft is above its local horizon and in view.
Telemetry from a spacecraft is primarily what?
A Uplinked commands
B Launch vehicle thrust
C Ground-station schedule
D Downlinked measurements
Answer: D. Downlinked measurements. Telemetry carries spacecraft health and instrument measurements from spacecraft to ground.
A telecommand is sent in which direction?
A Spacecraft to ground
B Payload to bus only
C Ground to spacecraft
D Battery to solar array
Answer: C. Ground to spacecraft. Telecommands are uplinked from ground systems to control spacecraft operations.
Why does deep-space communication have long delay?
A Finite light-travel time
B Low spacecraft mass
C Short antenna boom
D Small solar array
Answer: A. Finite light-travel time. Radio signals travel at the speed of light, so large distances create substantial round-trip delays.
What is a data buffer used for onboard?
A Change orbit inclination
B Measure star brightness
C Store data temporarily
D Release propellant
Answer: C. Store data temporarily. Buffers hold data temporarily when it cannot be processed or transmitted immediately.