Difficulty: Easy & Basic
For an Earth orbit, what is the closest point called?
A Apogee
B Equinox
C Zenith
D Perigee
Answer: D. Perigee. Perigee is the point in an Earth orbit closest to Earth.
What is the farthest point of an Earth orbit called?
A Apogee
B Perigee
C Node
D Nadir
Answer: A. Apogee. Apogee is the point in an Earth orbit farthest from Earth.
What is the eccentricity of a perfect circular orbit?
A 0.5
B 1
C 0
D 2
Answer: C. 0. A circular orbit has zero eccentricity.
Orbital inclination is measured relative to which plane?
A Launch pad
B Equatorial plane
C Ecliptic only
D Local horizon
Answer: B. Equatorial plane. For an Earth orbit, inclination is measured from the Earth’s equatorial plane.
A 90Β° Earth-orbit inclination is approximately what type?
A Equatorial orbit
B GEO
C Transfer orbit
D Polar orbit
Answer: D. Polar orbit. An orbit inclined about 90 degrees passes over the north and south polar regions.
A geosynchronous orbit matches which period?
A Earth’s rotation
B Lunar month
C Solar year
D ISS orbit
Answer: A. Earth’s rotation. A geosynchronous orbit has a period matching Earth’s rotation.
A sun-synchronous orbit is designed to maintain similar what?
A Ground speed
B Local solar time
C Satellite mass
D Antenna gain
Answer: B. Local solar time. Its orbital plane precesses so the spacecraft crosses locations at similar local solar times.
The ground track shows the path of which point?
A Launch vehicle
B Sun sensor
C Sub-satellite point
D Antenna beam
Answer: C. Sub-satellite point. Ground track is the surface path traced by the point directly below the spacecraft.
What does delta-v describe?
A Change in velocity
B Change in mass
C Change in temperature
D Change in signal
Answer: A. Change in velocity. Delta-v is the change in velocity delivered by a maneuver.
What is station-keeping intended to maintain?
A Battery chemistry
B Payload calibration
C Launch attitude
D Required orbit
Answer: D. Required orbit. Station-keeping maneuvers counter perturbations that move a spacecraft away from its assigned orbit.
Which vehicle stage often performs final orbit insertion?
A Payload fairing
B Landing leg
C Upper stage
D Solar array
Answer: C. Upper stage. The launch vehicle upper stage commonly provides the final burn to place a payload into its target orbit.
An orbit-insertion burn mainly establishes what?
A Thermal blanket
B Desired orbital elements
C Payload frequency
D Battery capacity
Answer: B. Desired orbital elements. An insertion maneuver targets the orbit’s required altitude, shape, and orientation.
Chemical propulsion produces thrust using what?
A Hot exhaust gas
B Solar pressure only
C Magnetic sensing
D Stored battery charge
Answer: A. Hot exhaust gas. Chemical engines generate thrust by expelling reaction products at high velocity.
Electric propulsion accelerates which particles?
A Water droplets
B Neutral dust
C Air molecules
D Charged particles
Answer: D. Charged particles. Electric thrusters accelerate ions or other charged propellant particles.
A monopropellant thruster uses how many propellant fluids?
A Two
B One
C Three
D Four
Answer: B. One. A monopropellant system uses a single propellant that decomposes or reacts in the thruster.
A bipropellant engine stores which pair?
A Water and nitrogen
B Helium and argon
C Fuel and oxidizer
D Oil and coolant
Answer: C. Fuel and oxidizer. Bipropellant systems store fuel and oxidizer separately until combustion.
Why are propellant tanks pressurized or managed?
A Cool solar arrays
B Measure attitude
C Store telemetry
D Feed thrusters reliably
Answer: D. Feed thrusters reliably. Tank and feed systems deliver propellant to the propulsion devices at required conditions.
How can a magnetorquer apply attitude torque?
A Interact with magnetic field
B Fire a chemical engine
C Move a solar array
D Change antenna frequency
Answer: A. Interact with magnetic field. A magnetorquer creates a magnetic dipole that interacts with the planetary magnetic field.
Gravity-gradient stabilization uses what natural effect?
A Solar panel heating
B Gravity variation across spacecraft
C Radio-frequency pressure
D Battery discharge
Answer: B. Gravity variation across spacecraft. The gravity-gradient torque arises because gravity acts differently across a body of finite size.
What happens when a reaction wheel reaches momentum saturation?
A Orbit becomes circular
B Battery doubles
C Further torque authority falls
D Thermal control stops
Answer: C. Further torque authority falls. As wheel momentum approaches its limit, available attitude-control torque in that direction is reduced.
How is reaction-wheel momentum commonly unloaded?
A More telemetry
B Lower antenna gain
C Thermal blankets
D Thruster or magnetic torque
Answer: D. Thruster or magnetic torque. Desaturation applies external torque, often with thrusters or magnetorquers, to unload wheel momentum.
An RTG generates electrical power from what source?
A Radioisotope decay heat
B Solar wind only
C Chemical battery reaction
D Earth’s magnetic field
Answer: A. Radioisotope decay heat. A radioisotope thermoelectric generator converts heat from radioactive decay into electricity.
Why may a solar array rotate during flight?
A Point at the Moon
B Track the Sun
C Measure orbit speed
D Cool the payload
Answer: B. Track the Sun. Articulated arrays rotate to maintain useful illumination as spacecraft attitude and Sun direction change.
Why dispose of a spacecraft after its mission?
A Increase station-keeping fuel
B Raise its radio frequency
C Reduce orbital debris risk
D Improve payload pointing
Answer: C. Reduce orbital debris risk. End-of-life disposal reduces the chance of leaving an uncontrolled spacecraft in a useful orbit.
What is a major risk from orbital debris?
A Lower solar output
B High-speed collision
C Reduced gravity
D Slower telemetry
Answer: B. High-speed collision. Even small debris can damage spacecraft because orbital collision speeds are very high.