Difficulty: Easy & Basic
The study of how slope forms change through time is:
A Slope development
B Stream ordering
C Plate motion
D Soil classification
Answer: A. Slope development. Slope development examines changes in slope form through time.
In geomorphology, a hillslope is the:
A Angle of a slope
B River channel bed
C Inclined land surface
D Drainage divide only
Answer: C. Inclined land surface. Hillslope usually names the inclined land surface itself.
Slope angle describes surface:
A Curvature
B Inclination
C Elevation
D Aspect
Answer: B. Inclination. Slope angle measures how steeply the surface inclines.
The common upper slope unit is:
A Concave
B Straight
C Terraced
D Convex
Answer: D. Convex. Many hillslope profiles begin with a convex upper unit.
The common middle slope unit is:
A Straight
B Concave
C Convex
D Terraced
Answer: A. Straight. A straight unit commonly occupies the middle profile.
The common lower slope unit is:
A Convex
B Concave
C Straight
D Vertical
Answer: B. Concave. Many profiles end in a concave lower unit.
A straight slope segment generally has:
A Changing curvature only
B No sediment movement
C Constant gradient
D A level surface
Answer: C. Constant gradient. A slope segment is defined by roughly constant gradient.
The compass direction a slope faces is its:
A Gradient
B Curvature
C Relief
D Aspect
Answer: D. Aspect. Aspect records the direction a hillslope faces.
Mass wasting moves material mainly under:
A Wind pressure
B Gravity
C Solar heating
D Ocean tides
Answer: B. Gravity. Mass wasting is downslope movement under gravity.
Weathering differs from erosion because it:
A Breaks rock in place
B Moves debris far away
C Deposits river sediment
D Builds a floodplain
Answer: A. Breaks rock in place. Weathering breaks material down without transporting it away.
Erosion mainly transports material from its:
A Mineral lattice
B Crystal structure
C Weathering front only
D Original location
Answer: D. Original location. Erosion moves fragmented material away from where it formed.
Very slow downslope movement of soil is:
A Rockfall
B Debris flow
C Creep
D Slump
Answer: C. Creep. Creep is a slow, steady form of slope movement.
A rockfall begins with material moving by:
A Planar sliding
B Rotational sliding
C Fluid flow
D Free fall
Answer: D. Free fall. Falls involve material dropping freely under gravity.
A translational slide moves along a:
A Curved surface
B Planar surface
C Level floodplain
D Wind-blown layer
Answer: B. Planar surface. Slides move over a distinct, often planar weakness surface.
A rotational slide is commonly called a:
A Slump
B Rockfall
C Debris flow
D Soil creep
Answer: A. Slump. A slump rotates along a curved failure surface.
A debris flow mixes coarse debris with:
A Dry sand only
B Glacial ice
C Water and mud
D Air and dust
Answer: C. Water and mud. Debris flows contain coarse fragments within a water-rich mixture.
Loose rock fragments at a cliff foot form:
A Loess
B Talus
C Till
D Alluvium
Answer: B. Talus. Fallen rock commonly accumulates as talus below a steep face.
Curved tree trunks on a hillside may indicate:
A Rockfall
B Toppling
C Sheetwash
D Creep
Answer: D. Creep. Slow soil movement can bend trees and fences over time.
Mass-movement deposits are collectively called:
A Alluvium
B Loess
C Colluvium
D Till
Answer: C. Colluvium. Colluvium is material moved downslope by mass wasting.
Slope form reflects weathering, transport, and:
A Deposition
B Condensation
C Subduction
D Evaporation
Answer: A. Deposition. Slope shapes reflect the processes acting on and moving material.
On a convex upper unit, gradient often:
A Decreases downslope
B Stays perfectly level
C Increases downslope
D Changes only sideways
Answer: C. Increases downslope. Convex upper units commonly steepen down-profile.
Concave lower slopes are often sites of:
A Only rock formation
B Transport and deposition
C No sediment movement
D Volcanic intrusion
Answer: B. Transport and deposition. Material commonly moves toward and accumulates near lower slopes.
A slope element has roughly constant:
A Gradient only
B Elevation
C Rock age
D Curvature
Answer: D. Curvature. Slope elements are profile sections of broadly constant curvature.
A slope segment has roughly constant:
A Gradient
B Curvature only
C Aspect
D Soil color
Answer: A. Gradient. Slope segments are defined by broadly constant gradient.
Slope failure occurs when downslope stress exceeds material:
A Porosity
B Strength
C Color
D Temperature
Answer: B. Strength. Movement begins when downslope forces exceed material resistance.