Reinforced concrete combines concrete with…
A Timber fibers
B Copper sheets
C Loose gravel
D Embedded steel reinforcement
Answer: D. Embedded steel reinforcement. Concrete and reinforcing steel act together when bond transfers forces between them.
Concrete is generally strong in…
A Tension
B Compression
C Torsion only
D Impact only
Answer: B. Compression. Concrete has high compressive strength but relatively low tensile strength.
Reinforcing steel mainly helps concrete resist…
A Tension
B Creep only
C Water pressure
D Thermal conductivity
Answer: A. Tension. Steel reinforcement carries tensile forces that plain concrete resists poorly.
Bond between steel and concrete transfers…
A Stress between materials
B Heat into soil
C Water through cracks
D Load to foundations only
Answer: A. Stress between materials. Adhesion, friction and mechanical interlock transfer force across the steel-concrete interface.
Concrete cover helps protect reinforcement from…
A Corrosion and fire
B Axial load
C Bending moment
D Concrete shrinkage only
Answer: A. Corrosion and fire. Cover provides a protective barrier and contributes to fire resistance and durability.
Longitudinal bars in a beam mainly resist…
A Concrete bleeding
B Flexural tension
C Surface abrasion
D Aggregate settlement
Answer: B. Flexural tension. Beam reinforcement is placed where bending creates tensile stress.
A stirrup in an RC beam mainly resists…
A Shear
B Concrete compression
C Bar corrosion
D Temperature change only
Answer: A. Shear. Transverse reinforcement helps resist shear and holds longitudinal bars in position.
A singly reinforced beam has main steel in…
A Compression zone only
B Tension zone
C Both flanges only
D The neutral axis only
Answer: B. Tension zone. A singly reinforced beam has flexural reinforcement primarily in the tension zone.
A doubly reinforced beam has steel in…
A Tension zone only
B The web only
C Tension and compression zones
D The neutral axis only
Answer: C. Tension and compression zones. Compression reinforcement supplements concrete compression capacity and can improve ductility.
A one-way slab mainly spans…
A One direction
B Four directions equally
C No direction
D Only around a column
Answer: A. One direction. A one-way slab transfers most load to supports in its shorter span direction.
A two-way slab transfers load…
A Only along its long span
B Only to one support
C In two directions
D Only through columns
Answer: C. In two directions. Two-way slab action distributes load to supports in both principal directions.
A column primarily carries…
A Axial compression
B Flexural tension only
C Surface runoff
D Thermal strain only
Answer: A. Axial compression. Columns are vertical compression members, often also subject to bending.
The main purpose of column ties is to…
A Carry slab drainage
B Support formwork only
C Restrain bars and confine core
D Replace longitudinal bars
Answer: C. Restrain bars and confine core. Transverse ties restrain longitudinal bars and confine concrete.
Development length provides…
A Concrete workability
B Slab thickness
C Aggregate gradation
D Adequate bar anchorage
Answer: D. Adequate bar anchorage. A bar needs sufficient embedment to develop its design force through bond.
Serviceability checks include…
A Only collapse strength
B Only rebar weight
C Deflection and cracking
D Concrete color
Answer: C. Deflection and cracking. Serviceability limits concern function and appearance, including deflection and crack control.
A collapse limit state checks…
A Paint finish
B Surface color
C Construction noise
D Strength and stability
Answer: D. Strength and stability. Limit-state design checks ultimate strength and structural stability.
Concrete curing mainly supports…
A Steel melting
B Hydration and strength gain
C Aggregate sorting
D Formwork removal only
Answer: B. Hydration and strength gain. Moist curing supports cement hydration and helps concrete develop strength and durability.
A beam under sagging moment has bottom fibers in…
A Compression
B Pure shear only
C Zero strain everywhere
D Tension
Answer: D. Tension. Sagging bending stretches the lower part of a typical beam.
Flexural cracks in a simply supported beam commonly begin near…
A Top midspan
B Support top only
C Bottom midspan
D The web centerline
Answer: C. Bottom midspan. Positive midspan bending puts the bottom fibers in tension.
The neutral axis in a bent RC beam has…
A Maximum concrete strain
B Zero longitudinal strain
C Maximum steel stress
D Zero shear everywhere
Answer: B. Zero longitudinal strain. Longitudinal strain changes sign across the neutral axis.
Stirrups are commonly anchored around…
A Aggregate particles
B Longitudinal bars
C Formwork panels
D Slab finishes
Answer: B. Longitudinal bars. Stirrups enclose longitudinal reinforcement to provide shear resistance and confinement.
A bar lap splice transfers force through…
A Welding every bar
B Concrete compression only
C A bearing plate
D Bond along overlap
Answer: D. Bond along overlap. Overlapped bars transfer force through bond with the surrounding concrete.
A flat slab is supported directly by…
A Continuous deep beams only
B Trusses only
C Ground beams only
D Columns
Answer: D. Columns. Flat slabs transfer loads directly to columns, with punching shear near column connections.
A beam-column joint transfers forces between…
A Beams and columns
B Soil and footing only
C Slab and pavement
D Water and aggregate
Answer: A. Beams and columns. The joint region must transfer member forces while maintaining structural integrity.
Durable RC design considers…
A Only concrete color
B Only beam span
C Exposure and reinforcement protection
D Only rebar shape
Answer: C. Exposure and reinforcement protection. Environmental exposure influences cover, materials, crack control and corrosion protection.