Two wires have equal length and material. Wire 1 carries force 2F and has area A; wire 2 carries force F and has area 2A. What is the extension ratio ΔL₁/ΔL₂?
A 4
B 1/4
C 1
D 2
Answer: A. 4. With ΔL = FL/(AY), the ratio is (2F/A)/(F/(2A)) = 4.
A wire has length 3 m, area 1 × 10⁻⁶ m², Young’s modulus 2 × 10¹¹ Pa, and load 150 N. What is its extension?
A 0.225 mm
B 2.25 mm
C 1.5 mm
D 4.5 mm
Answer: B. 2.25 mm. ΔL = FL/(AY) = 150 × 3/(10⁻⁶ × 2 × 10¹¹) = 0.00225 m = 2.25 mm.
A linearly elastic material has stress 4 × 10⁸ Pa and strain 0.002. What is its strain energy per unit volume?
A 2 × 10⁵ J/m³
B 8 × 10⁵ J/m³
C 4 × 10⁵ J/m³
D 4 × 10⁸ J/m³
Answer: C. 4 × 10⁵ J/m³. Energy density = ½σε = ½ × 4 × 10⁸ × 0.002 = 4 × 10⁵ J/m³.
Water has surface tension 0.072 N/m in a tube of radius 1 mm. Taking density 1000 kg/m³, g = 10 m/s², and contact angle 0°, what rise is predicted?
A 0.00144 m
B 0.0072 m
C 0.144 m
D 0.0144 m
Answer: D. 0.0144 m. h = 2γcosθ/(ρgr) = 0.144/(1000 × 10 × 0.001) = 0.0144 m.
For a wetting liquid, what happens to capillary rise if tube radius doubles while other quantities stay fixed?
A It becomes half as large
B It doubles
C It becomes four times as large
D It stays the same
Answer: A. It becomes half as large. The capillary height is inversely proportional to radius.
In the capillary-rise formula, what happens to height if surface tension doubles while density, radius, and contact angle stay fixed?
A It halves
B It doubles
C It becomes four times as large
D It stays the same
Answer: B. It doubles. Capillary height is directly proportional to γ.
A soap film has two faces. The area of each face increases by 0.01 m² and γ = 0.03 N/m. What work is required?
A 0.0003 J
B 0.003 J
C 0.0006 J
D 0.006 J
Answer: C. 0.0006 J. The total area increase is 2 × 0.01 m², so W = γΔA_total = 0.03 × 0.02 = 0.0006 J.
A soap film with γ = 0.025 N/m pulls on a movable wire 0.10 m long. What force acts on the wire?
A 0.0025 N
B 0.025 N
C 0.05 N
D 0.005 N
Answer: D. 0.005 N. Both film faces pull, so F = 2γL = 2 × 0.025 × 0.10 = 0.005 N.
A material has bulk modulus 2 × 10¹⁰ Pa and experiences pressure increase 4 × 10⁶ Pa. What is the fractional volume decrease?
Two wires have equal length, material, and load, but their radii are r and 2r. How does the thinner wire’s extension compare with the thicker wire’s?
A It is twice as large
B It is half as large
C It is four times as large
D It is one quarter as large
Answer: C. It is four times as large. Area is proportional to radius squared; the thicker wire has four times the area, so its extension is one quarter.
A wire’s length changes from L to 2L and its area from A to 3A, with load and material unchanged. What is its new extension relative to the old?
A Three halves as large
B Six times as large
C One sixth as large
D Two thirds as large
Answer: D. Two thirds as large. Since ΔL ∝ L/A, the ratio is (2L/3A)/(L/A) = 2/3.
A spring with k = 400 N/m is stretched by 0.05 m within its elastic range. What energy is stored?
A 0.5 J
B 0.05 J
C 1 J
D 10 J
Answer: A. 0.5 J. E = ½kx² = ½ × 400 × 0.05² = 0.5 J.
A stretched wire has lateral strain magnitude 0.0003 and longitudinal strain 0.001. What is its Poisson ratio?