Difficulty: Easy & Basic
What does the term ore describe?
A Waste rock only
B Mineral-free soil
C Valuable-bearing rock
D Processed tailings
Answer: C. Valuable-bearing rock. Ore contains enough valuable material to make extraction worthwhile under stated conditions.
What is gangue in an ore deposit?
A Nonvaluable associated minerals
B Pure metal product
C Mine access tunnel
D Crushed ore feed
Answer: A. Nonvaluable associated minerals. Gangue is unwanted mineral material mixed with valuable minerals in ore.
What is the material above a deposit called?
A Tailings
B Concentrate
C Gangue
D Overburden
Answer: D. Overburden. Overburden is soil or rock that must be removed to reach a deposit.
What are tailings left after?
A Geological mapping
B Mineral processing
C Mine ventilation
D Ore discovery
Answer: B. Mineral processing. Tailings remain after valuable minerals are separated from mined ore.
Which method commonly mines shallow, broad deposits?
A Underground mining
B Open-pit mining
C Solution mining
D Room-and-pillar
Answer: B. Open-pit mining. Open pits remove surface layers to expose near-surface ore bodies.
Which method reaches deep deposits through workings?
A Dredge mining
B Open-pit mining
C Quarrying
D Underground mining
Answer: D. Underground mining. Underground mining follows shafts and tunnels to reach deeper ore.
Where do placer deposits commonly accumulate?
A Stream sediments
B Glacial bedrock
C Volcanic vents
D Deep salt beds
Answer: A. Stream sediments. Running water can concentrate dense minerals in stream and river sediments.
Which site is chiefly used for building stone?
A Shaft
B Stope
C Quarry
D Drift
Answer: C. Quarry. Quarries extract construction materials such as dimension stone and aggregates.
What is a vertical mine passage called?
A Adit
B Drift
C Bench
D Shaft
Answer: D. Shaft. A shaft is a vertical opening used for access, hoisting, or ventilation.
What is a horizontal mine entrance called?
A Adit
B Shaft
C Stope
D Bench
Answer: A. Adit. An adit is a near-horizontal passage from the surface into a mine.
Which passage follows a mineral vein horizontally?
A Shaft
B Raise
C Drift
D Quarry
Answer: C. Drift. A drift is a horizontal underground passage, often following a deposit.
Where is ore removed in an underground mine?
A Adit
B Stope
C Shaft collar
D Vent raise
Answer: B. Stope. A stope is an underground opening where ore is extracted.
What does dredging recover from submerged deposits?
A Bottom sediments
B Deep bedrock
C Mountain overburden
D Airborne dust
Answer: A. Bottom sediments. Dredges excavate or suction sediments from riverbeds, lakes, or coastal waters.
What does core drilling retrieve?
A Smelted metal bars
B Tailings slurry
C Surface vegetation
D Cylindrical rock samples
Answer: D. Cylindrical rock samples. A core drill cuts a cylindrical sample that records rock layers and mineralization.
What does an assay determine in a sample?
A Tunnel direction
B Element concentration
C Truck capacity
D Water pressure
Answer: B. Element concentration. An assay measures the amount of a specified element or mineral in a sample.
What does higher ore grade generally indicate?
A Deeper mine workings
B Larger waste piles
C More valuable material
D Lower rock strength
Answer: C. More valuable material. Grade expresses the concentration of a valuable commodity in ore.
What is the cutoff grade?
A Average tunnel height
B Minimum economic grade
C Maximum pit depth
D Lowest water level
Answer: B. Minimum economic grade. The cutoff grade separates material considered economic to process from material treated as waste.
A mineral resource may be what?
A Only active mines
B Only proven reserves
C Processed metal stock
D Potentially economic material
Answer: D. Potentially economic material. A resource is a natural concentration whose extraction is currently or potentially feasible.
Which statement best describes a mineral reserve?
A Economic, identified portion
B Any mapped rock body
C Unconfirmed mineral possibility
D All mine waste
Answer: A. Economic, identified portion. A reserve is the economically and legally extractable part of an identified resource at a given time.
What is the purpose of beneficiation?
A Map surface faults
B Ventilate mine shafts
C Upgrade useful minerals
D Restore forest cover
Answer: C. Upgrade useful minerals. Beneficiation separates valuable minerals from waste to improve the feed or concentrate.
What does crushing do to mined rock?
A Raises metal purity
B Fills underground voids
C Lowers ore grade
D Reduces particle size
Answer: D. Reduces particle size. Crushers break large rock into smaller pieces for later processing.
What usually follows crushing in fine grinding?
A Larger rock blocks
B Smaller mineral particles
C Underground pillars
D Surface vegetation
Answer: B. Smaller mineral particles. Grinding reduces crushed ore further so minerals can be liberated for separation.
How does flotation separate many minerals?
A Magnetic poles only
B Rock color alone
C Surface-property differences
D Tunnel elevation
Answer: C. Surface-property differences. Flotation uses surface chemistry and bubbles to separate selected minerals.
What does smelting use to extract metal?
A High-temperature treatment
B Stream sorting
C Core drilling
D Wind erosion
Answer: A. High-temperature treatment. Smelting uses heat, often with chemical agents, to produce metal from concentrate.
What is mine reclamation intended to do?
A Increase ore grade
B Extend every shaft
C Create tailings
D Restore mined land
Answer: D. Restore mined land. Reclamation reshapes and stabilizes disturbed land and supports an appropriate post-mining use.