Answer: D. Abrasion up-ice and plucking down-ice. Ice abrades the upstream face and may pluck rock from the lee side as pressure changes.
A tributary glacier erodes a shallower valley than the main glacier. After the main ice melts, the tributary valley may appear
A As a wind-aligned dune
B As a closed karst basin
C As a submerged delta
D Hanging above the main trough
Answer: D. Hanging above the main trough. The deeper main glacier trough leaves the tributary valley perched above it, often with a waterfall.
Which statement best explains the orientation of a drumlin?
A Axis points upriver
B Long axis follows ice flow
C Only parallels wave crests
D Axis crosses prevailing winds
Answer: B. Long axis follows ice flow. Drumlins are streamlined by moving ice and their long axes generally parallel ice-flow direction.
Which distinction between an esker and a moraine is accurate?
A Both are calcite deposits
B Esker: meltwater; moraine: ice debris
C Moraine: dune sand; esker: bedrock
D Esker: sea cliff; moraine: delta
Answer: B. Esker: meltwater; moraine: ice debris. Eskers are commonly sorted and stratified by meltwater, whereas till in moraines is often unsorted.
A ridge of till marks the glacier’s maximum advance, with younger ridges farther inside the former limit. The outer ridge is the
A Lateral spit
B Terminal moraine
C Kame terrace
D Outwash levee
Answer: B. Terminal moraine. The terminal moraine marks the farthest position reached by the glacier; later pauses can form recessional ridges.
Why is glacial outwash usually more sorted than till?
A Ice deposits only uniform clay
B Waves polish ice
C Wind sorts subglacial material
D Meltwater sorts particles by size
Answer: D. Meltwater sorts particles by size. Meltwater transports and deposits sediment according to flow energy, producing layers and size sorting.
A small lake occupies a depression left by a detached block of glacier ice. Which origin is most likely?
A Kettle formation
B Coastal subsidence
C Wind deflation only
D Meander cutoff
Answer: A. Kettle formation. A buried remnant of ice can melt after retreat, leaving a kettle that may fill with water.
A cirque lake, also called a tarn, occupies a basin formed by
A Wave erosion behind a headland
B Glacial erosion near valley head
C River deposit at mountain front
D Wind deposition in a desert
Answer: B. Glacial erosion near valley head. A tarn commonly occupies an overdeepened cirque basin after glacier ice disappears.
A coastline has deep, steep-sided inlets that continue far inland through glacial troughs. These are
A Rias
B Tombolos
C Deltas
D Fjords
Answer: D. Fjords. Fjords are sea-flooded glacial troughs, typically deep and steep-sided.
In a karst landscape, several adjacent dolines may merge into a larger depression called a(n)
A Esker
B Uvala
C ArΓͺte
D Spit
Answer: B. Uvala. An uvala is a larger irregular closed depression formed by the coalescence of dolines.
Which pair correctly matches cave deposit and position?
A Bothβriver channel bed
B Stalactiteβceiling; stalagmiteβfloor
C Stalactiteβfloor; stalagmiteβceiling
D Bothβoutside a sea cliff
Answer: B. Stalactiteβceiling; stalagmiteβfloor. Stalactites hang from cave roofs, while stalagmites grow upward from cave floors.
Tower karst is most likely to form in a humid region with
A Limestone solution leaves steep hills
B Only loose windblown sand
C Thick till, buried bedrock
D Persistent sea ice, flat plain
Answer: A. Limestone solution leaves steep hills. Strong solution along limestone joints can leave steep residual towers and intervening depressions.
On limestone pavement, the grooves called grikes form mainly by
A River sediment on floodplain
B Wave deposition behind an island
C Water dissolves limestone joints
D Glacial deposition across a moraine
Answer: C. Water dissolves limestone joints. Carbonated water enlarges joints in exposed limestone, producing grikes between clints.
Parabolic dunes often have vegetation anchoring their arms. Their horns usually point
A Toward the nearest river mouth
B Downwind
C Toward the pole
D Upwind
Answer: D. Upwind. Vegetation stabilizes the arms while sand moves near the center, giving parabolic dunes horns that point upwind.
Transverse dunes are oriented mainly
A Perpendicular to prevailing winds
B Parallel to the prevailing wind
C Along river channels only
D Around a glacier’s margin
Answer: A. Perpendicular to prevailing winds. Transverse dune crests tend to lie perpendicular to a dominant wind where sand is abundant.
Longitudinal or seif dunes are generally aligned
A Across one dominant wind
B Radially around a volcanic vent
C Along resultant wind direction
D Only along coasts
Answer: C. Along resultant wind direction. Longitudinal dunes commonly align with the net or resultant direction of winds from more than one direction.
Star dunes are especially associated with
A Glacier flow beneath a cirque
B Tidal currents in drowned valleys
C Shifting winds, abundant sand
D One steady wind, no sand
Answer: C. Shifting winds, abundant sand. Multidirectional winds build star dunes with several arms around a central peak.
Which feature is a wind-abraded rock with polished or faceted surfaces, rather than a long ridge?
A Drumlin
B Yardang
C Ventifact
D Esker
Answer: C. Ventifact. Ventifacts are stones shaped or faceted by wind-driven particles; yardangs are larger streamlined ridges.
Loess can support productive agriculture, but its exposed surfaces may be vulnerable to
A Glacial plucking under ice
B Tidal cave formation
C Gully erosion and slope failure
D Coral reef growth
Answer: C. Gully erosion and slope failure. Silt-rich loess can be fertile, yet weakly consolidated loess may erode readily when vegetation is removed.
Wave refraction around a headland tends to concentrate wave energy on the
A Offshore dune crest
B Coastal plain uniformly
C Headland; bays are sheltered
D Bay floor; headland protected
Answer: C. Headland; bays are sheltered. Refraction bends wave fronts, focusing energy on projecting headlands and dispersing it in bays.
A spit grows across the mouth of a bay mainly through
A River incision through bedrock
B Glacial abrasion along the shore
C Limestone solution below sea level
D Longshore sediment transport and deposition
Answer: D. Longshore sediment transport and deposition. Longshore drift carries sediment along a coast and can extend a spit across a bay mouth.
A depositional ridge completely closing a bay may enclose a
A Lagoon
B Polje
C Cirque
D Gorge
Answer: A. Lagoon. A bar or barrier may isolate shallow water behind it, creating a lagoon.
An uplifted former wave-cut platform and beach may be preserved as a
A Marine terrace
B Kame
C Bajada
D Doline
Answer: A. Marine terrace. Coastal uplift or a relative fall in sea level can leave an old shore platform raised above active waves.
Badland topography most commonly develops where
A Weak ground, sparse cover, gullies
B Single stable beach ridge
C Glacier-polished granite
D Coral over shallow lagoon
Answer: A. Weak ground, sparse cover, gullies. Badlands develop through intense dissection of erodible surfaces, often where sparse cover permits runoff erosion.
A landscape shaped by stream, wind, waves, ice, and gravity is best interpreted as
A Processes interact with rock structure
B Only tectonic uplift
C One universal process alone
D Unchanging feature over time
Answer: A. Processes interact with rock structure. Landforms reflect interactions among lithology, structure, climate, and multiple geomorphic processes.