Difficulty: Easy & Basic
Which valley cross-section is most typical of glacial erosion?
A U-shaped
B Flat coastal plain
C V-shaped
D V-shaped with a floodplain
Answer: A. U-shaped. A valley glacier widens and deepens its trough, commonly leaving a U-shaped cross-section.
A bowl-shaped hollow at the head of a mountain glacier is a
A Yardang
B Spit
C Cirque
D Delta
Answer: C. Cirque. A cirque is an amphitheater-like hollow eroded near a glacier’s head.
A sharp ridge separating adjacent glacial valleys is an
A Arête
B Levee
C Tombolo
D Esker
Answer: A. Arête. Opposing cirques or glacial troughs can erode a narrow, knife-edged arête between them.
A pyramidal peak carved by several cirques is called a
A Horn
B Kame
C Doline
D Butte
Answer: A. Horn. A horn forms when glacial erosion cuts back from several sides of a mountain summit.
A streamlined hill of glacial sediment aligned with former ice flow is a
A Spit
B Stalagmite
C Mesa
D Drumlin
Answer: D. Drumlin. Drumlins are elongated hills commonly aligned parallel to the direction of glacier movement.
A long, winding ridge of sand and gravel deposited by meltwater in or beneath ice is an
A Moraine
B Arête
C Wave-cut platform
D Esker
Answer: D. Esker. Meltwater streams within or beneath a glacier can deposit sediment that remains as a sinuous esker.
A broad plain of sediment deposited by glacial meltwater beyond an ice margin is an
A Coastal terrace
B Karst tower
C Peneplain
D Outwash plain
Answer: D. Outwash plain. Meltwater spreads and sorts sediment in front of a glacier, building an outwash plain.
A ridge of glacial debris marking the glacier’s farthest advance is a
A Point bar
B Beach ridge
C Terminal moraine
D Spit
Answer: C. Terminal moraine. A terminal moraine marks the maximum advance of a glacier’s snout.
A kettle lake commonly forms when
A Waves cut a headland
B Buried ice melts, leaving depressions
C Wind deposits a loess blanket
D A river abandons a meander
Answer: B. Buried ice melts, leaving depressions. Sediment can bury isolated ice blocks; after they melt, the resulting hollows may fill with water.
A fjord is generally a
A Drowned glacial valley at coast
B Wind-eroded rock ridge
C Limestone cave chamber
D River-built triangular plain
Answer: A. Drowned glacial valley at coast. Fjords are deep, steep-sided glacial troughs flooded by the sea.
Karst landscapes most commonly develop where the bedrock is
A Soluble limestone
B Fresh basalt only
C Unconsolidated beach sand
D Granite with no fractures
Answer: A. Soluble limestone. Groundwater dissolves soluble rocks, especially limestone, creating characteristic karst terrain.
A closed depression formed by solution or collapse in karst terrain is a
A Spit
B Esker
C Doline or sinkhole
D Moraine
Answer: C. Doline or sinkhole. Dolines are closed depressions; some form by dissolution and others by collapse above cavities.
A stalactite grows from a cave’s
A Ceiling
B Floor
C Outer cliff face
D River channel
Answer: A. Ceiling. Mineral-rich water loses carbon dioxide and precipitates calcite as stalactites hanging from cave ceilings.
A stalagmite grows upward from a cave’s
A Floor
B Coastal platform
C Ceiling
D Dune crest
Answer: A. Floor. Drops falling from cave ceilings can deposit calcite on the floor and build stalagmites upward.
When a stalactite and stalagmite join, they form a
A Horn
B Levee
C Column
D Spit
Answer: C. Column. Continued mineral deposition may join a stalactite and stalagmite into a cave column.
A large, enclosed, flat-floored depression in a karst region is a
A Bajada
B Cirque
C Gorge
D Polje
Answer: D. Polje. A polje is a broad closed karst depression, often with a flat floor and seasonal drainage.
On a limestone pavement, the blocks between solution grooves are called
A Grikes
B Clints
C Horns
D Kames
Answer: B. Clints. Clints are the blocks of limestone; the fissures between them are grikes or grykes.
A hollow excavated by wind removal of loose sediment is a
A Kettle
B Cirque
C Oxbow
D Deflation hollow
Answer: D. Deflation hollow. Deflation lowers loose ground as wind removes fine particles, sometimes forming a hollow.
Long, streamlined ridges carved by wind abrasion in deserts are
A Levees
B Drumlins
C Arêtes
D Yardangs
Answer: D. Yardangs. Yardangs are wind-sculpted ridges aligned with the prevailing wind in exposed dry regions.
A rock with a narrow base and wider cap shaped by near-ground wind abrasion is a
A Stalagmite
B Horn
C Mushroom rock
D Mesa
Answer: C. Mushroom rock. Sand-laden winds abrade near the ground more strongly, which can undercut a rock pedestal.
Desert loess is mainly made of wind-transported
A Rounded boulders
B Fine silt
C Coarse lava blocks
D Coral limestone
Answer: B. Fine silt. Silt-sized particles can remain airborne and settle far from their source as loess.
A surface of closely packed pebbles left after wind removes finer sediment is desert
A Moraine
B Pavement
C Delta
D Tombolo
Answer: B. Pavement. Deflation can winnow fine material and leave a protective lag of coarse fragments.
A slope-foot accumulation of angular rock fragments is commonly called
A Outwash
B Talus or scree
C Loess
D Alluvium
Answer: B. Talus or scree. Rockfall and weathering produce angular debris that accumulates below steep slopes.
A rotational slide that moves along a curved failure surface is a
A Meander
B Slump
C Esker
D Spit
Answer: B. Slump. A slump rotates a mass downslope along a concave, curved slip surface.
Isolated rounded granite outcrops that stand above a weathered landscape are often called
A Levees
B Deltas
C Tors
D Fjords
Answer: C. Tors. Tors are resistant rock outcrops, commonly granitic, left standing by differential weathering and erosion.