A vertical dike cuts three beds; an ash layer lies above the dike; a fault cuts the ash and dike but not an even younger lava flow. What is the oldest-to-youngest order?
A Ash, beds, dike, lava flow, fault
B Fault, beds, ash, dike, lava flow
C Beds, ash, fault, dike, lava flow
D Beds, dike, ash, fault, lava flow
Answer: D. Beds, dike, ash, fault, lava flow. Cross-cutting and superposition place the beds first, then the dike, ash, fault, and finally the lava flow that seals the fault.
A sequence is overturned by folding. Why can superposition alone give the wrong age order?
A Present vertical position may be reversed relative to original deposition
B Superposition applies only to igneous rocks
C Fossils always become younger when overturned
D Overturning changes radioactive half-lives
Answer: A. Present vertical position may be reversed relative to original deposition. Overturned beds may place older layers above younger ones, so younging indicators and structural context are needed.
An erosional surface cuts folded strata and is overlain by horizontal beds. What can be concluded about the events?
A The horizontal cover was folded before the lower beds existed
B Folding and erosion occurred before deposition of the horizontal cover
C The unconformity is older than the folded strata
D All beds were deposited at the same time
Answer: B. Folding and erosion occurred before deposition of the horizontal cover. The lower strata were folded and eroded before younger horizontal layers were deposited across the surface.
An outcrop shows sandstone over granite, and a granite dike cuts the sandstone nearby. What relative-age interpretation is required?
A All granite is younger than sandstone
B The sandstone is older than both granite bodies
C The granite basement is older than sandstone, but the cross-cutting dike is younger than sandstone
D No relative ages can be inferred
Answer: C. The granite basement is older than sandstone, but the cross-cutting dike is younger than sandstone. The basement granite predates its sedimentary cover, while the separate dike that cuts sandstone postdates it.
A fossil correlation suggests two beds are time-equivalent, but their rock types differ greatly. What is the best explanation?
A They must be different ages because lithology differs
B One bed must be metamorphic
C Fossils cannot be used across lithologic changes
D They formed in different depositional environments during overlapping time
Answer: D. They formed in different depositional environments during overlapping time. Different facies can form at the same time in separate environments and still be correlated by fossils.
A formation is bounded by lithologic changes that migrate across a basin through time. What property might its boundaries have?
A They may be diachronous
B They must be isochronous
C They cannot be observed in the field
D They must be unconformities
Answer: A. They may be diachronous. Lithologic changes can migrate, so formation boundaries may cross time surfaces rather than represent one instant.
A radiometric mineral date from an ash bed is 65 million years, and fossils below are older than fossils above. How do the methods complement each other?
A Both only give relative ages
B The ash gives a numerical tie point while fossils and superposition order nearby strata
C Fossils reset the isotope clock
D The date proves all beds formed in one year
Answer: B. The ash gives a numerical tie point while fossils and superposition order nearby strata. Numerical dating anchors the sequence in years, while fossils and stratigraphic relations help order and correlate the beds.
A parent isotope to daughter isotope ratio is measured in a mineral. What fundamental process makes the age estimate possible?
A Sediment grains settle at a constant speed
B Faults move at exactly one rate
C Radioactive decay occurs at a measurable rate
D Fossils grow at a known annual rate
Answer: C. Radioactive decay occurs at a measurable rate. Radiometric dating uses predictable radioactive decay and isotope ratios to estimate elapsed time.
A sample begins with 800 parent atoms and undergoes two half-lives. How many parent atoms remain, assuming a closed system?
A 400
B 600
C 100
D 200
Answer: D. 200. After one half-life 400 remain; after two, half of 400, or 200, remain.
A rock layer contains a fossil known to have lived only between 100 and 95 million years ago. What does the fossil constrain?
A The layer’s age to that interval, subject to preservation and identification
B The layer’s exact thickness
C The age of the Earth’s core
D The direction of bedding dip
Answer: A. The layer’s age to that interval, subject to preservation and identification. A short-ranging fossil can constrain a layer’s relative or approximate age to the interval in which the organism lived.
A lower bed contains an index fossil from 150β145 Ma; an upper bed contains one from 140β135 Ma. What broad ordering is supported?
A The upper bed must be older because its ages are smaller
B The lower fossil-bearing bed is older than the upper bed
C Both beds must be exactly 145 Ma
D The beds cannot be compared
Answer: B. The lower fossil-bearing bed is older than the upper bed. The fossil ranges support an older lower bed and a younger upper bed, consistent with superposition if undisturbed.
A fault cuts a 70-million-year-old ash but is covered by a 60-million-year-old lava flow. What age range is supported for faulting?
A Older than 70 million years
B Younger than 60 million years
C Between about 70 and 60 million years ago
D Exactly 65 million years
Answer: C. Between about 70 and 60 million years ago. The fault postdates the 70 Ma ash it cuts and predates the 60 Ma lava that seals it.
What is the purpose of a Global Boundary Stratotype Section and Point (GSSP)?
A To measure the depth of a mantle plume
B To classify all rocks by color
C To identify the oldest mineral in a continent
D To define a reference point for a boundary on the geologic time scale
Answer: D. To define a reference point for a boundary on the geologic time scale. A GSSP is a formally selected reference section and point that defines a boundary between units on the geologic time scale.
Why are many time boundaries defined with multiple kinds of evidence?
A Fossils, dates, magnetic patterns, and other markers may have different strengths and limits
B One fossil always records every event exactly
C Lithology is identical worldwide
D All rocks contain datable minerals
Answer: A. Fossils, dates, magnetic patterns, and other markers may have different strengths and limits. Combining independent markers improves correlation and boundary placement where any one method is incomplete.
A sequence contains two parallel sedimentary packages separated by a long interval of erosion, but no angular discordance. What is most likely?
A A nonconformity
B A disconformity
C An angular unconformity
D A transform fault
Answer: B. A disconformity. A disconformity is a time gap between roughly parallel sedimentary strata, commonly involving erosion or nondeposition.
A younger sedimentary layer contains clasts of an older unit that is no longer exposed nearby. What does this show?
A The clasts formed after the younger layer
B The younger layer must be igneous
C The older unit was exposed and eroded before the younger layer accumulated
D Superposition is impossible to apply
Answer: C. The older unit was exposed and eroded before the younger layer accumulated. Clasts of an older unit in younger sediment indicate that the source rock was exposed and eroded before deposition.
A formation’s type section is poorly exposed, but a nearby section shows the same lithology and fossils. What role can the second section serve?
A A new numerical time unit automatically
B A fault plane replacing the type section
C An index fossil by itself
D A reference section that supports correlation and description
Answer: D. A reference section that supports correlation and description. Additional reference sections can help characterize and correlate units when the designated type section is incomplete or inaccessible.
What is a key limitation of the law of superposition?
A It assumes the sequence has not been overturned or structurally repeated
B It applies only to fossil-free rocks
C It gives numerical ages directly
D It requires every bed to be horizontal today
Answer: A. It assumes the sequence has not been overturned or structurally repeated. Structural overturning or fault repetition can disrupt the simple age order inferred from present position.
A sedimentary unit pinches out laterally and is replaced by a different rock type. What principle helps explain the original continuity?
A Cross-cutting relationships
B Lateral continuity
C Radioactive decay
D Fault creep
Answer: B. Lateral continuity. Lateral continuity explains how beds can extend sideways and thin or change facies across a basin.
A volcanic ash layer is chemically distinctive and occurs at the same position in multiple basins. What is its best stratigraphic use?
A A proof that the basins had identical water depth
B A measure of fault slip direction
C A widespread marker horizon for correlation
D A way to identify all fossils as the same species
Answer: C. A widespread marker horizon for correlation. A distinctive ash bed can provide a marker horizon that helps correlate strata across separate basins.
A radiometric age dates a mineral that crystallized during metamorphism, not deposition. What does it directly date?
A The exact age of every fossil in the rock
B The time the original sediment grain formed in all cases
C The age of the present land surface
D The metamorphic mineral growth or reset event, not automatically the sediment’s original deposition
Answer: D. The metamorphic mineral growth or reset event, not automatically the sediment’s original deposition. A mineral age records the event represented by its crystallization or isotopic resetting, which may postdate deposition.
An unconformity separates a 300-million-year-old bed below from a 250-million-year-old bed above. What is known about the missing interval?
A At least some time between those ages is not represented at the contact
B The gap lasted exactly 50 million years everywhere
C No erosion occurred
D The upper bed is older
Answer: A. At least some time between those ages is not represented at the contact. The 50-million-year separation between ages indicates missing or unrecorded time, though the precise duration at the contact may require more constraints.
A rock sequence contains beds, a folded dike, and a fault that cuts both. Which event is youngest among these three structures?
A The dike intrusion
B The fault
C The original bedding
D They must be the same age
Answer: B. The fault. The fault cuts both the beds and dike, so faulting is younger than those structures.
Why can numerical dates from igneous ash layers improve a sedimentary time framework?
A They replace the need to identify rock layers
B They reveal only sediment grain size
C They anchor relative stratigraphic correlations with ages in years
D They always date fossils directly
Answer: C. They anchor relative stratigraphic correlations with ages in years. Dated ash beds provide numerical tie points that can calibrate relative ages of adjacent sedimentary strata.
Which combination best reconstructs a sequence where beds are tilted, truncated, and covered by horizontal strata?
A Only mineral hardness
B Only modern GPS velocities
C Only the color of the upper bed
D Superposition, original horizontality, and unconformity relationships
Answer: D. Superposition, original horizontality, and unconformity relationships. These principles together show deposition, later tilting, erosion, and renewed deposition across an angular unconformity.