Minerals MCQs (Set-4)

Difficulty: Hard

A mineral identification key first separates samples by metallic versus nonmetallic luster. Why is this a useful first step but not a final identification?

A Luster uniquely identifies every mineral
B Luster gives the exact chemical formula
C All metallic minerals have the same hardness
D Many minerals share each luster class, so other properties are needed

A soft white mineral leaves a white streak and has hardness near 2. Which candidate best fits the Mohs reference minerals?

A Gypsum
B Quartz
C Corundum
D Diamond

A specimen is scratched by a steel tool but scratches calcite. What approximate hardness conclusion is reasonable if the tool is near 5.5?

A Its hardness is below 1
B Its hardness is above 3 and below roughly 5.5
C It is exactly 10
D It is softer than calcite

A student uses a Mohs value of 8 as if it were twice as hard as a value of 4. What is the error?

A Mohs measures mass, not hardness
B Mohs values are percentages
C Mohs ranks relative scratch resistance and is not a linear ratio scale
D Hardness has no relation to scratching

Two carbon samples have different hardness, cleavage, and appearance but the same elemental composition. Which explanation is most likely?

A One sample must be a rock mixture
B Carbon cannot form minerals
C The samples differ only in surface dust
D They are different polymorphs with different crystal structures

A mineral’s surface is coated with iron oxides, but a fresh broken surface is pale. What should guide the identification?

A Fresh-surface properties and tests, while treating the coating as alteration
B The coating color alone
C Only the specimen’s weight
D The color of nearby soil

A sample has cubic cleavage and a salty-water evaporite setting. Which mineral is a strong candidate?

A Quartz
B Halite
C Mica
D Calcite

A mineral has perfect cleavage in one direction but breaks irregularly in other directions. Is this contradictory?

A Yes; cleavage means all surfaces must be flat
B Yes; a mineral cannot show both properties
C No; cleavage is expressed in preferred directions, while other breaks may be fractures
D No; fracture only describes the original crystal shape

A mineral group is defined by a shared anion or anionic group. Which classification principle is being used?

A Crystal habit only
B Hardness ranking
C Geographic origin
D Chemical classification

A specimen is highly reflective but has a very low streak and is easily scratched. What does this illustrate?

A Luster, streak, and hardness measure different properties
B All three tests measure the same thing
C Reflectivity determines hardness
D Streak is another name for cleavage

A field geologist records hardness, streak, cleavage, and luster. What additional information can improve the description?

A The collector’s favorite color only
B Crystal habit, density, magnetism, and chemical reaction where appropriate
C The sample’s market price only
D The weather on the day it formed

Why can a mineral’s apparent color vary from its streak color?

A Streak is always the exact surface color
B Color and streak are identical by definition
C Trace impurities, defects, and surface effects can alter visible color
D A mineral’s powder contains no atoms

An unknown dark mineral is magnetic, but a second dark mineral is not. What is the best next step?

A Assume both are magnetite
B Use color as the only confirmation
C Discard the magnetic test as irrelevant
D Compare additional diagnostic properties before concluding either identity

What is the main limitation of identifying a mineral solely from crystal shape?

A Some minerals have variable habits, and different minerals can form similar shapes
B Crystal shape never relates to minerals
C Only rocks have shapes
D Every mineral has one unique visible shape

A mineral is harder than a streak plate and leaves a scratch instead of a powder line. What is a useful alternative?

A Call the scratch its streak color
B Test relative hardness and use other properties such as cleavage and luster
C Assume it is not a mineral
D Heat it until it melts

A sample fizzes weakly with acid only after powdering. Which interpretation is most cautious?

A It is certainly pure quartz
B It must be a sulfide
C A carbonate may be present, but confirm with additional properties
D The reaction proves it is a rock, not a mineral

A mineral has a chemical formula but no ordered internal structure. Under the standard definition, what is the issue?

A A chemical formula alone proves mineral status
B All substances with formulas are minerals
C Crystal order is only needed for rocks
D It would not qualify as a mineral because crystalline order is a defining criterion

A natural volcanic glass is inorganic and solid but lacks long-range crystal order. Why is it generally classified as mineraloid rather than a mineral?

A It is not crystalline
B It is too dense
C It has no chemical elements
D It is always a mixture of fossils

A mineral sample shows multiple colors but one consistent crystal structure and composition. What is a likely cause of color variation?

A A change into a different rock at every spot
B Minor impurities or structural defects
C A lack of atoms
D Magnetism alone

Why should the name “ore” not be treated as a mineral species name?

A Ore is always a pure element
B Ore names crystal structure
C Ore is material from which a valuable commodity can be extracted economically, depending on conditions
D Ore means any sedimentary rock

A mineral is described as “vitreous, conchoidal, hardness 7, no cleavage.” Which common mineral best matches?

A Gypsum
B Calcite
C Halite
D Quartz

A polished gemstone looks different from a rough specimen of the same mineral. Which properties remain more fundamental to species identification?

A Composition and crystal structure, supported by physical tests
B Polish and market value
C Cut style and size
D The color of the display light

A mineral’s formula includes elements in a repeating crystal lattice. What does the lattice explain?

A Its geological age exactly
B Its internal order and many physical properties, including cleavage
C Its location on Earth
D The amount of sunlight it reflects only

A sample has cleavage in two directions at nearly 90 degrees, moderate hardness, and a pinkish color. Why should it not be identified from color alone?

A Pink always means quartz
B Only calcite can be pink
C Feldspars and other minerals vary in color; cleavage and additional tests are needed
D Color identifies the chemical formula exactly

Which conclusion best reflects good mineral-identification practice?

A Force every sample into a name from color alone
B Ignore inconsistent observations
C Assume common minerals cannot be confused
D Treat identification as evidence-based matching of several properties, and note uncertainty when tests conflict