A sample scratches fluorite (hardness 4) but is scratched by apatite (hardness 5). What is its approximate Mohs hardness interval?
A Between 1 and 2
B Between 6 and 7
C Between 4 and 5
D Above 9
Answer: C. Between 4 and 5. If it scratches fluorite but is scratched by apatite, its relative hardness lies between 4 and 5.
A mineral has a brassy metallic luster, leaves a dark streak, and is brittle. Which common mineral is the best match?
A Gold
B Gypsum
C Quartz
D Pyrite
Answer: D. Pyrite. Pyrite commonly has brassy metallic luster and a dark streak, unlike native gold’s yellow streak and malleability.
A transparent mineral fizzes readily in dilute acid and has rhombohedral cleavage. Which mineral is most likely?
A Calcite
B Quartz
C Halite
D Gypsum
Answer: A. Calcite. Calcite reacts with dilute acid and commonly has rhombohedral cleavage.
A specimen splits into thin sheets and has one prominent cleavage direction. Which mineral group is a likely candidate?
A Feldspar
B Mica
C Quartz
D Garnet
Answer: B. Mica. Micas show perfect basal cleavage, separating into thin sheets.
A mineral scratches glass, lacks obvious cleavage, and breaks with curved surfaces. Which identification is most consistent?
A Gypsum
B Calcite
C Quartz
D Halite
Answer: C. Quartz. Quartz is relatively hard, lacks prominent cleavage, and commonly shows conchoidal fracture.
Why does streak often remain useful when the external color varies?
A Streak always gives a unique answer for every mineral
B Streak measures chemical formula directly
C Streak cannot change in any mineral
D Powdered color is less affected by some surface effects and impurities
Answer: D. Powdered color is less affected by some surface effects and impurities. Streak can be more consistent than surface color for some minerals, though it still is not unique by itself.
A geologist finds two feldspar samples with varying sodium and calcium proportions. What concept can explain continuous compositional variation within a mineral group?
A Solid-solution substitution
B Radioactive decay
C Cleavage
D Conchoidal fracture
Answer: A. Solid-solution substitution. Some feldspar series show compositional variation as ions substitute within related crystal structures.
Which statement best distinguishes a mineral species from a rock type?
A A mineral is always a mixture; a rock is always a pure compound
B A mineral has a characteristic composition and structure; a rock is an aggregate or body of mineral matter
C A mineral is liquid; a rock is crystalline
D The terms are interchangeable
Answer: B. A mineral has a characteristic composition and structure; a rock is an aggregate or body of mineral matter. Minerals are defined by composition and crystal structure, whereas rocks are aggregates or bodies of mineral matter.
A powdered mineral is placed on an unglazed porcelain plate to test streak. Why is the plate usually unglazed?
A Its glaze changes the mineral’s chemical formula
B It measures cleavage angles
C Its rough surface can abrade the sample and reveal powder color
D It separates crystals by density
Answer: C. Its rough surface can abrade the sample and reveal powder color. An unglazed plate can abrade a sample so the powder’s streak color can be observed.
Why can a visually shiny mineral still be nonmetallic?
A Luster is always metallic if light is reflected
B All shiny minerals contain iron
C Nonmetallic minerals absorb all light
D Many nonmetallic minerals have vitreous, pearly, or other bright lusters
Answer: D. Many nonmetallic minerals have vitreous, pearly, or other bright lusters. Nonmetallic lusters can be glassy, pearly, silky, or adamantine and still appear bright.
A sample has very high density and a metallic luster but is not strongly magnetic. What is the safest identification approach?
A Combine density with streak, hardness, cleavage, and chemical tests
B Identify it as gold from density alone
C Assume it must be magnetite
D Reject it as a mineral
Answer: A. Combine density with streak, hardness, cleavage, and chemical tests. No single property is conclusive; multiple independent observations improve identification.
An unknown sample has no visible crystal faces but produces a consistent powder and diagnostic cleavage. Can it still be a mineral?
A No; every mineral must show perfect external crystals
B Yes; visible crystal faces are not required if internal order and other criteria are present
C No; minerals must be transparent
D Yes only if it is magnetic
Answer: B. Yes; visible crystal faces are not required if internal order and other criteria are present. Mineral crystals can lack visible faces; crystallinity is an internal structural property.
A carbonate mineral’s reaction with dilute acid becomes more obvious after the sample is powdered. Why?
A Powdering changes the mineral into a silicate
B Acid reacts only with large crystals
C Powdering increases exposed surface area for reaction
D The streak plate supplies carbon dioxide
Answer: C. Powdering increases exposed surface area for reaction. Greater exposed surface area can make a carbonate reaction easier to observe.
Which result would most strongly support identifying a sample as magnetite?
A A sweet taste
B A hardness of exactly 10
C Perfect sheet cleavage
D Strong attraction to a magnet together with compatible appearance and streak
Answer: D. Strong attraction to a magnet together with compatible appearance and streak. Magnetite is strongly magnetic; checking additional properties helps distinguish it from other dark minerals.
Why is tasting an unknown mineral an unacceptable identification test?
A It can expose the tester to toxic or harmful substances
B Taste always identifies mineral groups inaccurately
C Minerals have no chemical composition
D Water dissolves every mineral instantly
Answer: A. It can expose the tester to toxic or harmful substances. Unknown minerals may contain toxic elements or fibers, so tasting is unsafe and unnecessary.
A mineral shows cleavage parallel to several crystallographically equivalent planes. What controls the repeated directions?
A The shape of the hand specimen only
B Weak bonding planes in its crystal structure
C The color of its streak
D The direction of gravity during collection
Answer: B. Weak bonding planes in its crystal structure. Cleavage directions reflect internal structural planes where bonding is relatively weak.
What is a polymorph in mineralogy?
A A rock made from many fossils
B A mineral with no fixed chemical composition
C A mineral with the same chemical composition as another but a different crystal structure
D A mineral that changes color in sunlight only
Answer: C. A mineral with the same chemical composition as another but a different crystal structure. Polymorphs share chemical composition but differ in crystal structure, as diamond and graphite do.
A rock is made of quartz, feldspar, and mica. Which interpretation is correct?
A It is one mineral because all grains are solid
B It cannot be a rock because it has crystals
C It is a native element
D It is a rock composed of several mineral species
Answer: D. It is a rock composed of several mineral species. Rocks commonly consist of multiple mineral species; quartz, feldspar, and mica are common examples.
A mineral’s hardness is 7.5. What can be inferred relative to quartz at hardness 7?
A It should scratch quartz under suitable conditions
B Quartz should scratch it easily
C It must be softer than gypsum
D It has the same hardness as talc
Answer: A. It should scratch quartz under suitable conditions. A mineral with hardness above quartz’s 7 should scratch quartz in a standard scratch comparison.
Why should scratch tests be done on a fresh surface when possible?
A Fresh surfaces always have a different chemical formula
B Weathering coatings may differ from the unaltered mineral beneath
C Old surfaces cannot reflect light
D Cleavage disappears after weathering
Answer: B. Weathering coatings may differ from the unaltered mineral beneath. Weathered coatings or alteration products can have properties unlike the fresh mineral.
A specimen has a cubic shape, but its cleavage is poor. What is the distinction?
A Both terms mean the same thing
B Habit measures density; cleavage measures color
C Crystal habit is external growth form; cleavage is how the mineral breaks
D Cleavage is the original crystal shape
Answer: C. Crystal habit is external growth form; cleavage is how the mineral breaks. Crystal habit describes growth form; cleavage describes breakage along internal weakness planes.
A mineral has a nonmetallic vitreous luster. What does vitreous mean?
A Metal-like
B Earthy and dull only
C Silky and fibrous only
D Glass-like
Answer: D. Glass-like. Vitreous luster is a glass-like reflection from the mineral surface.
A mineral specimen is a solid solution with a range of composition. Which statement can still be true?
A It can remain one mineral species if its structure and composition range meet classification criteria
B Any compositional variation makes it a rock
C A mineral must always be a pure single element
D It must be liquid
Answer: A. It can remain one mineral species if its structure and composition range meet classification criteria. Some mineral species permit defined compositional ranges while retaining a consistent crystal structure.
A mineral has several diagnostic properties, but none is unique on its own. Why is identification still possible?
A One property must always be unique
B The combined pattern of properties can narrow the identification
C Properties are unrelated to minerals
D Only color can identify minerals
Answer: B. The combined pattern of properties can narrow the identification. A combination of hardness, streak, luster, cleavage, density, and chemistry can distinguish minerals more reliably than any one trait.
An unknown mineral scratches a sample of hardness 6 but is scratched by quartz of hardness 7. Which best describes it?
A Its hardness is below 3
B Its hardness is exactly 10
C Its hardness is between 6 and 7
D Its hardness cannot be compared by scratching
Answer: C. Its hardness is between 6 and 7. A sample that scratches 6 but is scratched by 7 has relative hardness between those references.