Darcy-Weisbach equation estimates what pipe loss?
A Only entrance loss
B Only elevation change
C Pump work
D Major friction loss
Answer: D. Major friction loss. Darcy-Weisbach relates head loss to pipe friction, length, diameter and velocity.
In Darcy-Weisbach, head loss varies with velocity how?
A Directly linear
B Inversely linear
C As velocity squared
D Independent of velocity
Answer: C. As velocity squared. The Darcy-Weisbach friction head loss contains V²/(2g).
For fully developed laminar pipe flow, Darcy friction factor is what?
A 16 / Reynolds number
B Reynolds / 64
C 64 / Reynolds number
D 0.316 Reynolds
Answer: C. 64 / Reynolds number. For circular-pipe laminar flow, the Darcy friction factor equals 64/Re.
The Moody chart gives friction factor using Reynolds number and what?
A Specific gravity
B Relative roughness
C Pressure head
D Pipe color
Answer: B. Relative roughness. The Moody chart relates Darcy friction factor to Reynolds number and relative roughness.
A minor loss coefficient relates loss head to what?
A Velocity head
B Pressure head only
C Pipe length
D Density head
Answer: A. Velocity head. Minor losses are commonly written hL = K V²/(2g).
An entrance loss occurs where flow enters what?
A A pump shaft
B A manometer tube only
C A pipe or channel
D A turbine blade only
Answer: C. A pipe or channel. Sudden entry into a conduit causes local energy loss.
Pipes in series carry what flow rate?
A Same head loss
B Same diameter always
C Same velocity always
D Same flow rate
Answer: D. Same flow rate. Continuity requires the same steady flow through each series pipe.
Parallel pipes between common nodes have what?
A Same flow rate
B Same diameter
C Same head loss
D Same velocity
Answer: C. Same head loss. The total head difference between the common inlet and outlet applies to each parallel branch.
The hydraulic grade line represents pressure head plus what?
A Velocity head
B Elevation head
C Friction factor
D Pump efficiency
Answer: B. Elevation head. The HGL is z + p/γ.
The energy grade line lies above HGL by what amount?
A Pressure head
B Static lift
C Pump efficiency
D Velocity head
Answer: D. Velocity head. The EGL includes velocity head in addition to the hydraulic grade line.
A sudden pipe closure can produce what transient?
A Steady laminar flow
B Capillary rise
C Water hammer
D Hydraulic jump only
Answer: C. Water hammer. Rapid velocity change creates a pressure wave known as water hammer.
A surge tank helps control what in a hydraulic conduit?
A Fluid density
B Pipe roughness
C Vapor pressure only
D Pressure transients
Answer: D. Pressure transients. A surge tank absorbs or supplies flow to reduce transient pressure changes.
Pump head represents energy added per unit what?
A Fluid weight
B Pipe length
C Mass density
D Surface area
Answer: A. Fluid weight. Head is mechanical energy per unit weight.
A centrifugal pump imparts energy using which component?
A Rotating impeller
B Stationary piston
C Venturi throat
D Piezometer tube
Answer: A. Rotating impeller. The rotating impeller increases fluid velocity and pressure.
Priming a centrifugal pump removes what from casing?
A All liquid
B Air or gas
C Bearing grease
D Shaft keys
Answer: B. Air or gas. Priming fills the casing and suction line with liquid so the pump can operate.
NPSH available helps prevent what?
A Laminar flow
B Water hammer
C Pipe expansion
D Cavitation
Answer: D. Cavitation. Sufficient net positive suction head keeps pressure above vapor pressure at the pump inlet.
Pump specific speed relates speed, flow and what?
A Head
B Pipe roughness
C Fluid color
D Vapor pressure only
Answer: A. Head. Specific speed groups pump geometry using rotational speed, discharge and head.
A turbine extracts energy from fluid as what?
A Heat input
B Mass storage
C Shaft work
D Surface tension
Answer: C. Shaft work. A hydraulic turbine converts fluid energy into shaft work.
A diffuser in a pump casing can convert velocity into what?
A Pressure
B Heat only
C Mass flow
D Shaft speed
Answer: A. Pressure. Diffusion reduces velocity and recovers static pressure.
Cavitation damage is caused by what collapsing?
A Vapor bubbles
B Air filters
C Boundary layers
D Water columns
Answer: A. Vapor bubbles. Vapor bubbles collapse in higher-pressure regions and can pit surfaces.
A hydraulic jump is a rapid change from supercritical flow to what?
A Subcritical flow
B Laminar flow
C Critical flow only
D Vacuum flow
Answer: A. Subcritical flow. A hydraulic jump raises depth and dissipates energy as flow changes to subcritical.
In pipe flow, friction loss reduces what downstream?
A Mass conservation
B Fluid density
C Pipe diameter
D Total head
Answer: D. Total head. Friction converts mechanical energy into internal energy and lowers total head.
The energy equation with a pump includes which addition?
A Specific gravity
B Pump head
C Surface tension
D Vapor pressure
Answer: B. Pump head. Pump head is added to the flow’s mechanical energy balance.
The energy equation with a turbine includes which removal?
A Static pressure only
B Turbine head
C Density head
D Elevation head only
Answer: B. Turbine head. Turbine head represents mechanical energy extracted from the fluid.
A pipe’s hydraulic diameter is four times area divided by what?
A Pipe length
B Wetted perimeter
C Cross-section diameter
D Flow rate
Answer: B. Wetted perimeter. Hydraulic diameter is Dh = 4A/Pw for noncircular conduits.