Difficulty: Easy & Basic
In steady level flight, what force balances weight?
A Lift
B Thrust
C Drag
D Side force
Answer: A. Lift. In unaccelerated level flight, lift balances aircraft weight.
During steady level cruise, thrust balances what?
A Weight
B Drag
C Side force
D Centripetal force
Answer: B. Drag. At constant speed in level flight, thrust balances drag.
Rate of climb measures altitude gained per what?
A Ground distance
B Unit time
C Bank angle
D Fuel mass
Answer: B. Unit time. Rate of climb is vertical distance gained per unit time.
The best rate-of-climb speed is identified as what?
A Vx
B Va
C Vy
D Vne
Answer: C. Vy. Vy is the best-rate-of-climb speed.
Which speed gives the greatest height per horizontal distance?
A Vy
B Vx
C Va
D Vne
Answer: B. Vx. Vx is the best-angle-of-climb speed.
For clearing an obstacle, which climb speed is preferred?
A Vx
B Vy
C Va
D Vne
Answer: A. Vx. Vx maximizes altitude gained over horizontal distance.
How is load factor defined?
A Weight divided by lift
B Thrust divided by drag
C Drag divided by lift
D Lift divided by weight
Answer: D. Lift divided by weight. Load factor is the ratio of lift to aircraft weight.
What load factor applies in unaccelerated straight-level flight?
A 0 g
B 2 g
C 1 g
D 4 g
Answer: C. 1 g. Unaccelerated straight flight has a load factor of 1 g.
Level flight in a coordinated 60Β° bank produces what load factor?
A 2 g
B 1 g
C 3 g
D 4 g
Answer: A. 2 g. At 60Β° bank, a coordinated level turn requires 2 g.
During a level turn, lift must exceed what?
A Thrust
B Drag
C Side force
D Weight
Answer: D. Weight. The total lift must exceed weight so its vertical component can balance weight.
Which lift component curves the flight path in a turn?
A Vertical component
B Spanwise component
C Horizontal component
D Axial component
Answer: C. Horizontal component. The horizontal lift component provides the centripetal force for the turn.
To maintain altitude in a level turn, what balances weight vertically?
A Thrust component
B Drag component
C Vertical lift component
D Horizontal lift
Answer: C. Vertical lift component. The vertical component of lift balances weight while altitude is held.
With bank held fixed, increasing airspeed produces what turn radius?
A Smaller radius
B Larger radius
C Same radius
D Zero radius
Answer: B. Larger radius. At constant bank, turn radius increases with airspeed.
Keeping speed fixed, increasing bank produces which radius change?
A Smaller radius
B Larger radius
C Same radius
D Zero radius
Answer: A. Smaller radius. Increasing bank at constant speed reduces turn radius.
Why does faster flight reduce turn rate at constant bank?
A Lift becomes zero
B Weight increases
C Drag disappears
D Rate falls with speed
Answer: D. Rate falls with speed. At fixed bank, rate of turn varies inversely with airspeed.
Increasing bank at fixed speed changes turn rate how?
A It decreases
B It increases
C It stays fixed
D It becomes zero
Answer: B. It increases. A steeper bank increases rate of turn at the same speed.
While holding altitude and speed, a steeper bank usually requires more what?
A Fuel quantity
B Wing area
C Cabin pressure
D Power setting
Answer: D. Power setting. A steeper level turn raises load and drag, so more power is generally needed to hold speed.
Why does stall speed rise in a higher-g maneuver?
A Wing area grows
B Weight vanishes
C Drag becomes zero
D Load factor increases
Answer: D. Load factor increases. Stall speed increases with the square root of load factor.
Climb angle compares altitude gain with what?
A Elapsed time
B Horizontal distance
C Fuel mass
D Bank angle
Answer: B. Horizontal distance. Climb angle describes vertical gain relative to horizontal distance.
Relative to what reference is descent flight-path angle measured?
A The horizon
B The wing chord
C The vertical axis
D The ground track
Answer: A. The horizon. A descent flight path slopes below the local horizontal.
At the absolute ceiling, maximum climb rate is approximately what?
A One g
B Maximum
C Negative infinity
D Zero
Answer: D. Zero. At the absolute ceiling, the aircraft has no remaining rate-of-climb capability.
In a steady climb, excess thrust supports which force component?
A Weight along path
B Lift across span
C Drag through wing
D Side force
Answer: A. Weight along path. Excess thrust balances the component of weight acting along the climb path.
Which force component sustains an unpowered glide?
A Weight along path
B Engine thrust
C Centrifugal force
D Propeller torque
Answer: A. Weight along path. In a glide, the component of weight along the descending path balances drag.
As altitude is lost during descent, potential energy can become what?
A Electrical charge
B Wing area
C Kinetic energy
D Fuel mass
Answer: C. Kinetic energy. A descending aircraft can exchange altitude energy for speed, while drag dissipates energy.
For unaccelerated flight, net acceleration is what?
A One g
B Maximum
C Zero
D Always downward
Answer: C. Zero. Unaccelerated motion has zero net acceleration.