Engineering Mechanics MCQs (Set-2)

What condition defines impending slip?

A Normal force becomes zero
B Weight becomes zero
C Friction reaches its limit
D Speed reaches infinity

How is angle of friction related to coefficient ΞΌ?

A Tangent equals ΞΌ
B Sine equals ΞΌ squared
C Cosine equals mass
D Angle equals normal force

What is the resultant of a distributed load?

A Area under load diagram
B Peak intensity only
C Load duration
D Support reaction only

Where does a uniform distributed load resultant act?

A At its span midpoint
B At the left support
C At the right support
D Outside the span

What does a simply supported beam's pin end resist?

A Rotation only
B Two translations
C Three rotations
D No motion

What is shear force at a beam section?

A Net axial displacement
B Area moment of inertia
C Net transverse force at cut
D Total strain energy

What is bending moment at a beam section?

A Net moment on one side
B Total mass of the beam
C Beam length only
D Area under deflection curve

What does the zero-force-member rule use at a joint?

A Material hardness
B Joint equilibrium and geometry
C Beam deflection only
D Support settlement

What is the second moment of area used to describe?

A Mass density
B Thermal expansion
C Resistance to bending deformation
D Surface roughness

What are units of second moment of area?

A Length squared
B Length to the fourth
C Force per length
D Mass times speed

What does the parallel-axis theorem add to centroidal inertia?

A Force times distance
B Mass divided by area
C Length times width
D Area times distance squared

What does a beam's neutral axis have in elastic bending?

A Maximum tensile stress
B Maximum shear force
C Zero curvature always
D Zero longitudinal strain

What is the friction force before impending motion?

A Always exactly ΞΌs N
B Always zero
C Equal to weight
D At most ΞΌs N

What does the work-energy principle relate?

A Force and centroid
B Mass and area
C Net work and kinetic-energy change
D Moment and pressure

What does conservation of mechanical energy require?

A Only conservative work
B Any friction losses
C Unbalanced force always
D Constant speed

What does the impulse-momentum principle relate?

A Work and displacement
B Moment and inertia
C Stress and strain
D Impulse and momentum change

What is angular momentum about a fixed axis for a rigid body?

A Mass times linear speed
B Torque divided by time
C Force times radius squared
D I times angular speed

What is rotational kinetic energy about a fixed axis?

A I times omega
B Torque times radius
C One half I omega squared
D Mass times acceleration

What is the method of sections useful for in a truss?

A Concrete mix design
B Selected member forces directly
C Bearing capacity only
D Survey elevations

What does the principle of virtual work use?

A Only real-time motion
B Material hardness
C Temperature change
D Equilibrium under virtual displacement

What is mechanical advantage?

A Input work over time
B Moment over area
C Output force over input force
D Mass over speed

What is the direction of a normal reaction?

A Parallel to contact surface
B Perpendicular to contact surface
C Always vertical
D Always horizontal

What does relative motion compare?

A Motion relative to another body
B Only absolute acceleration
C Only force magnitude
D Only support reactions

What does angular acceleration measure?

A Rate of angular-velocity change
B Angular displacement per force
C Torque per length
D Radius per second

What does a rigid-body assumption mean?

A Body has zero mass
B Distances between points stay fixed
C Body cannot rotate
D Forces vanish