Answer: A. Inertia. A body maintains rest or uniform straight-line motion unless a net external force acts on it.
What is the SI unit of force?
A Joule
B Watt
C Pascal
D Newton
Answer: D. Newton. Force is measured in newtons, equivalent to kilogram metre per second squared.
What is weight near Earth's surface?
A Mass divided by area
B Mass times gravitational acceleration
C Force times distance
D Density times volume
Answer: B. Mass times gravitational acceleration. Weight is the gravitational force on a body and is approximately mass times g near Earth's surface.
What does a free-body diagram show?
A Isolated body and external forces
B Only internal stress colors
C Only material costs
D Only motion history
Answer: A. Isolated body and external forces. A free-body diagram isolates a body and shows applied loads, reactions and other external forces.
For planar equilibrium, what must net force be?
A Zero in each direction
B Maximum in each direction
C Equal to body mass
D Always vertical
Answer: A. Zero in each direction. A body in planar static equilibrium has zero net horizontal and vertical force.
What must the net moment be for static equilibrium?
A Equal to weight
B Maximum possible
C Always clockwise
D Zero
Answer: D. Zero. Static equilibrium requires the sum of moments about any point to be zero.
What is the moment of a force about a point?
A Force divided by distance
B Mass times acceleration
C Force times perpendicular distance
D Work divided by time
Answer: C. Force times perpendicular distance. Moment magnitude is force multiplied by the perpendicular distance from the point to the force line of action.
What is the SI unit of moment?
A Newton metre
B Joule per second
C Pascal metre
D Kilogram metre
Answer: A. Newton metre. Moment is measured in newton metres, from force times perpendicular distance.
What support commonly provides one reaction in 2D?
A Fixed support
B Built-in support
C Roller support
D Rigid clamp
Answer: C. Roller support. An ideal roller on a horizontal surface supplies one normal reaction and permits movement along the surface.
What reactions can an ideal pin support provide in 2D?
A Two force components
B One moment only
C Three moments
D No reaction
Answer: A. Two force components. A pin prevents translation in two directions but permits rotation, so it supplies two force components and no moment.
What characterizes a two-force member?
A Three applied couples
B Equal opposite collinear end forces
C Uniform bending only
D One distributed pressure
Answer: B. Equal opposite collinear end forces. A member loaded only at two ends is in equilibrium when the end forces are equal, opposite and collinear.
What is a couple?
A Single central force
B Distributed pressure only
C Equal opposite separated forces
D Parallel velocity vectors
Answer: C. Equal opposite separated forces. A couple consists of equal and opposite parallel forces separated by a distance, producing a pure moment.
What does Varignon's theorem state?
A Force equals mass times speed
B Work equals power times distance
C Moment of resultant equals sum
D Friction equals normal force always
Answer: C. Moment of resultant equals sum. The moment of a resultant about a point equals the sum of the moments of its component forces about that point.
What is static friction limited by?
A Mass divided by distance
B Coefficient times normal force
C Speed times acceleration
D Area times pressure
Answer: B. Coefficient times normal force. The maximum static friction magnitude is ΞΌs times the normal reaction; actual friction can be lower.
What is the direction of friction?
A Always points upward
B Opposes impending relative motion
C Always points toward center
D Always equals weight
Answer: B. Opposes impending relative motion. Friction acts tangentially at contact and opposes relative motion or its tendency.
What does a truss member ideally carry?
A Axial force
B Bending only
C Torsion only
D Uniform pressure
Answer: A. Axial force. In an ideal pin-jointed truss, members carry axial tension or compression.
What is the method of joints based on?
A Energy balance only
B Material testing
C Friction angle only
D Joint force equilibrium
Answer: D. Joint force equilibrium. The method of joints applies force equilibrium at each truss joint to find member forces.
Where is a rectangle's centroid located?
A At one corner
B Along one edge
C At its geometric center
D Outside the shape
Answer: C. At its geometric center. A uniform rectangle is symmetric about both centerlines, so its centroid is at their intersection.
What is the centroid of a triangle measured from its base?
A Half its height
B One third of its height
C Two thirds of its height
D At the apex
Answer: B. One third of its height. The centroid of a triangle lies one third of its height above the base, or two thirds from the opposite vertex.
What is the SI unit of work?
A Newton
B Watt
C Pascal
D Joule
Answer: D. Joule. Work is force through displacement and is measured in joules.
What does Newton's second law relate?
A Stress and strain only
B Net force and acceleration
C Moment and area
D Work and time
Answer: B. Net force and acceleration. Newton's second law states that net force equals mass times acceleration for constant mass.
What is kinetic energy of a translating particle?
A One half mass speed squared
B Mass times speed
C Force times acceleration
D Weight divided by speed
Answer: A. One half mass speed squared. Translational kinetic energy is one half m v squared.
What does impulse equal for a constant force?
A Force times distance
B Mass times acceleration
C Power divided by speed
D Force times time interval
Answer: D. Force times time interval. Impulse is the integral of force over time; for constant force it is force times duration.
What is the magnitude of centripetal acceleration?
A Radius divided by speed
B Speed times radius
C Angular speed over time
D Speed squared over radius
Answer: D. Speed squared over radius. For circular motion, inward acceleration magnitude is v squared divided by radius.
What does a kinematic analysis describe?
A Forces without motion
B Material failure only
C Motion without its causes
D Support reactions only
Answer: C. Motion without its causes. Kinematics describes position, velocity and acceleration without examining the forces that cause motion.