Engineering Hydrology MCQs (Set-3)

The rational-method peak estimate uses C, I and what?

A Return period only
B Catchment area
C Soil plasticity
D Channel length only

For a unit hydrograph, multiplying effective rainfall depth scales what?

A Catchment area
B Rainfall duration
C Baseflow chemistry
D Direct-runoff ordinates

A 1 cm unit hydrograph has a peak of 4 m3/s. For 3 cm excess rain, peak is what?

A 4 m3/s
B 7 m3/s
C 24 m3/s
D 12 m3/s

The S-curve method combines unit hydrographs to change what?

A Catchment boundary
B Effective-rainfall duration
C Return period
D Gauge elevation

Muskingum routing represents channel storage using inflow and what?

A Outflow
B Rainfall depth
C Soil suction
D Catchment area only

A flood-routing model predicts how a hydrograph changes through what?

A A rain gauge
B A soil profile only
C A channel or reservoir
D A traffic junction

A catchment with steep slopes and low storage often has what response?

A Very delayed peaks
B Rapid runoff peaks
C No direct runoff
D Constant baseflow only

A large time of concentration generally corresponds to what?

A Slower basin response
B Instantaneous runoff
C Higher rainfall depth
D Lower catchment area

A hyetograph is converted to effective rainfall by estimating what?

A Losses and abstractions
B Channel routing only
C Baseflow separation only
D Stream width

A unit hydrograph’s duration refers to what?

A Effective-rainfall pulse length
B Return period
C Streamflow measurement time
D Catchment travel distance

In a triangular hydrograph approximation, runoff volume is what area?

A Base plus peak
B Half base times peak
C Peak divided by base
D Base times rainfall intensity

Flood frequency analysis uses annual maxima or what alternative series?

A Daily rainfall averages only
B Peaks over threshold
C Soil-moisture normals
D Stream temperature series

A 100-year flood has what probability in any one year?

A 1 percent
B 10 percent
C 50 percent
D 100 percent

A 2-year return-period event can occur in consecutive years because what?

A Fixed two-year schedule
B The event has zero variance
C Annual chances repeat independently
D Its probability becomes zero

A rainfall-runoff model needs precipitation and what catchment input?

A Loss and response parameters
B Road lane count
C Concrete grade
D Traffic signal cycle

An infiltration index such as phi-index summarizes what?

A Maximum stream velocity
B Return-period rainfall
C Average loss rate during storm
D Baseflow recession

A design flood hydrograph provides peak and what other information?

A Only annual rainfall
B Only soil type
C Flow timing and volume
D Only channel width

A reservoir’s flood attenuation depends partly on storage and what?

A Rain gauge material
B Outlet operation
C Soil plastic limit
D Catchment map scale

A stream’s baseflow recession reflects release from what?

A Road pavement
B Rain gauge funnel
C Surface snow only
D Catchment storage

A unit hydrograph should be applied to what rainfall component?

A Total rainfall unadjusted
B Evapotranspiration only
C Baseflow only
D Effective rainfall

A lag time is commonly measured between rainfall excess centroid and what?

A Rain-gauge installation
B Catchment divide
C Evaporation minimum
D Runoff hydrograph peak

A watershed with impervious surfaces usually has what infiltration response?

A Increased infiltration
B No runoff
C Longer storage only
D Reduced infiltration

A channel’s conveyance influences flood-wave travel time and what?

A Attenuation
B Rain-gauge accuracy
C Rainfall depth
D Soil texture only

A flow-duration curve is primarily a tool for describing what?

A Flood return period alone
B Rainfall intensity
C Streamflow availability
D Soil classification

A design storm duration is often related to what basin characteristic?

A Groundwater pH
B Soil specific gravity
C Time of concentration
D Channel color