An isohyetal map connects locations with equal what?
A Stream discharge
B Soil density
C Rainfall depth
D Evaporation rate
Answer: C. Rainfall depth. Isohyets are lines of equal precipitation depth for a stated period.
The arithmetic-mean rainfall method gives equal weight to which gauges?
A Only the highest gauge
B Only the outlet gauge
C Gauges by elevation only
D All gauges
Answer: D. All gauges. The arithmetic mean treats each gauge value equally.
Thiessen polygons assign rainfall weights according to what?
A Area represented by each gauge
B Gauge color
C Stream velocity
D Storm duration only
Answer: A. Area represented by each gauge. Thiessen weighting uses the fraction of catchment area closest to each gauge.
A normal-ratio rainfall method is useful when gauges have what?
A Different long-term normals
B Identical rainfall records
C No missing values ever
D Only streamflow data
Answer: A. Different long-term normals. Normal-ratio weighting adjusts for differences in average annual rainfall among gauges.
A double-mass curve can help check what?
A Soil bearing capacity
B Consistency of rainfall records
C Pipe friction
D Stream-bed slope only
Answer: B. Consistency of rainfall records. Double-mass analysis compares cumulative records to reveal inconsistency or a change in gauge conditions.
An intensity-duration-frequency curve relates intensity to duration and what?
A Soil density
B Stream width
C Frequency or return period
D Evaporation pan type
Answer: C. Frequency or return period. IDF curves describe rainfall intensity for selected durations and recurrence levels.
A return period T corresponds approximately to annual exceedance probability what?
A 1 divided by T
B T squared
C T divided by 100
D 1 minus T
Answer: A. 1 divided by T. For a stationary independent annual series, annual exceedance probability is about 1/T.
A 10-year event has what annual exceedance probability under the usual model?
A 1 percent
B 5 percent
C 10 percent
D 50 percent
Answer: C. 10 percent. The probability is 1/10 = 0.10, though it can occur in consecutive years.
Time of concentration is the travel time from what location?
A Hydraulically most distant point
B Nearest rain gauge
C Stream outlet only
D Catchment centre always
Answer: A. Hydraulically most distant point. It is the time for runoff from the hydraulically most distant point to reach the outlet.
The rational method is commonly used for estimating what?
A Annual groundwater recharge
B Peak runoff from small catchments
C Reservoir sediment volume
D Long-term evaporation
Answer: B. Peak runoff from small catchments. The rational method estimates peak discharge for small drainage areas using runoff coefficient, intensity and area.
In the rational method, runoff coefficient represents what?
A Rainfall return period
B Channel roughness
C Fraction becoming runoff
D Soil specific gravity
Answer: C. Fraction becoming runoff. The coefficient approximates the fraction of rainfall contributing to direct runoff.
A higher infiltration rate generally produces what surface-runoff response?
A More direct runoff
B Less runoff for same rain
C No change ever
D Higher rainfall depth
Answer: B. Less runoff for same rain. Greater infiltration can reduce the amount of rainfall excess reaching the surface.
A unit hydrograph assumes effective rainfall is uniform over what?
A Catchment area and duration
B One soil layer only
C The outlet cross-section
D Only the stream channel
Answer: A. Catchment area and duration. The standard assumption distributes unit effective rainfall uniformly across the basin for its stated duration.
Unit-hydrograph superposition relies on linearity and what?
A Random gauge spacing
B Zero baseflow always
C Time invariance
D No channel storage
Answer: C. Time invariance. Superposition also assumes the catchment response does not change with time.
Baseflow separation estimates what beneath a storm hydrograph?
A Groundwater contribution
B Rainfall intensity
C Direct runoff peak only
D Evaporation loss
Answer: A. Groundwater contribution. Hydrograph separation distinguishes slower baseflow from event direct runoff.
A flow-duration curve shows discharge exceeded for what?
A Fraction of time
B A return period only
C A rainfall duration
D A soil depth
Answer: A. Fraction of time. It ranks daily or instantaneous flows by the percentage of time each is equalled or exceeded.
A mass curve of rainfall plots cumulative rainfall against what?
A Catchment elevation
B Time
C Stream width
D Soil strength
Answer: B. Time. The mass curve is cumulative rainfall depth versus time.
A design storm is selected to represent what?
A Maximum soil density
B Average road traffic
C Pump head only
D Specified design frequency
Answer: D. Specified design frequency. Design storms provide rainfall inputs associated with a chosen probability or return period.
A pluviograph records what continuously?
A Groundwater head only
B Soil shear stress
C Evaporation temperature
D Rainfall depth over time
Answer: D. Rainfall depth over time. A pluviograph is a recording rain gauge that tracks rainfall through time.
Stream discharge can be measured by area times what?
A Rainfall depth
B Return period
C Infiltration capacity
D Mean velocity
Answer: D. Mean velocity. For a cross-section, discharge equals wetted area times mean velocity.
A current meter estimates stream velocity by measuring what?
A Water temperature
B Rotational response in flow
C Rainfall interception
D Soil suction
Answer: B. Rotational response in flow. A current meter relates rotor or sensor response to water velocity.
The stage-discharge rating may shift after what channel change?
A Rain-gauge relocation only
B Scour or deposition
C A new watershed divide
D Evaporation increase
Answer: B. Scour or deposition. Bed changes can alter the stage corresponding to a given discharge.
A drainage basin’s runoff response depends on rainfall and what?
A Drawing scale
B Bridge paint
C Water hardness
D Catchment characteristics
Answer: D. Catchment characteristics. Soil, slope, land cover, shape and storage affect runoff response.
A hydrograph peak usually follows rainfall peak because of what?
A Higher soil Gs
B Gauge color
C Catchment travel time
D Road alignment
Answer: C. Catchment travel time. Runoff needs time to travel through the basin and channel to the outlet.
A reservoir can reduce downstream flood peak through what?
A Higher rainfall intensity
B Faster runoff routing
C Lower infiltration
D Temporary storage
Answer: D. Temporary storage. Reservoir storage can delay and attenuate the flood hydrograph.