A city planner needs the probability that a shaking level will be exceeded within 50 years. Which product best answers this?
A Probabilistic seismic-hazard map
B Focal-mechanism diagram
C Mercalli intensity report
D Aftershock sequence chart
Answer: A. Probabilistic seismic-hazard map. These maps estimate the chance that a specified level of ground shaking will be exceeded during a stated period.
If the PβS arrival-time interval doubles, what can be concluded about magnitude?
A Nothing from interval alone
B Doubles
C Becomes zero
D Falls by one unit
Answer: A. Nothing from interval alone. The PβS interval mainly constrains distance to the source, not magnitude by itself.
The P-wave shadow zone is produced mainly by:
A P-wave refraction at core boundary
B Stops at crustβmantle boundary
C Wind bending waves over oceans
D Magnetic field absorbs waves
Answer: A. P-wave refraction at core boundary. P waves refract as they enter the liquid outer core, leaving a shadow region on the far side.
The S-wave shadow zone provides evidence that Earthβs outer core is:
A Part of the atmosphere
B Liquid
C Made of granite
D A rigid solid shell
Answer: B. Liquid. S waves do not propagate through liquid, so their shadow zone indicates a liquid outer core.
A one-unit increase in earthquake magnitude corresponds approximately to what change in recorded wave amplitude?
A No systematic change
B About ten times greater
C About one-tenth as great
D About two times greater
Answer: B. About ten times greater. Magnitude is logarithmic; one unit corresponds to roughly ten times the wave amplitude.
A one-unit increase in moment magnitude corresponds to roughly how much more seismic energy?
A About 1,000 times
B About 32 times
C About 2 times
D About 10 times
Answer: B. About 32 times. Each magnitude unit corresponds to approximately 31.6 times more energy released.
Seismic moment depends on fault area, average slip, and:
A Rock rigidity
B The number of nearby towns
C Ocean salinity
D Air temperature
Answer: A. Rock rigidity. Seismic moment is the product of fault area, average slip, and rock rigidity.
A large earthquake can have moderate local intensity at a distant station because intensity:
A Is always equal to magnitude
B Fixed by earthquake name
C Varies with distance and site
D Cannot be observed
Answer: C. Varies with distance and site. Shaking effects generally vary across locations with distance, depth, geology, and structures.
A shallow earthquake beneath a soft sediment-filled basin may produce strong shaking partly because:
A Sediment prevents all seismic waves
B Sediments amplify and prolong motion
C Hypocenter reaches surface
D Magnitude increases within the basin
Answer: B. Sediments amplify and prolong motion. Soft basin sediments can amplify or prolong shaking at some frequencies.
A focal-mechanism βbeachballβ diagram is used to infer:
A Fault orientation and slip style
B The earthquakeβs exact future date
C Maps soil everywhere
D The tsunamiβs final run-up everywhere
Answer: A. Fault orientation and slip style. Focal mechanisms summarize seismic-wave patterns to show possible fault-plane orientations and slip style.
Why can a focal mechanism show two possible fault planes?
A Both planes fit first-motion data
B Epicenter unknowable by definition
C P waves never reveal motion
D Always ruptures two faults
Answer: A. Both planes fit first-motion data. The two nodal planes are mathematically possible; geological or aftershock evidence can identify the actual fault plane.
A recurrence interval calculated from past earthquakes is best understood as:
A Historical average, not countdown
B Guaranteed next-event schedule
C A measure of local intensity
D A way to prevent aftershocks
Answer: A. Historical average, not countdown. Recurrence estimates summarize long-term behavior but do not predict an exact date.
The βearthquake cycleβ on a locked fault commonly includes:
A Regional stress stops completely
B Constant continuous slip only
C Daily plate-motion reversal
D Strain buildup, slip, readjustment
Answer: D. Strain buildup, slip, readjustment. Faults may lock and accumulate strain, rupture during an earthquake, then continue adjusting afterward.
A fault that moves steadily without producing strong shaking is said to be undergoing:
A Rupture directivity
B Liquefaction
C Subduction
D Creep
Answer: D. Creep. A creeping fault slips slowly and can release strain aseismically.
An earthquake associated with wastewater injection or reservoir loading is an example of:
A A magnetic reversal
B Induced seismicity
C Always a normal aftershock sequence
D A lunar eclipse
Answer: B. Induced seismicity. Human activities can alter subsurface stress or pore pressure and induce earthquakes.
Why can fluid injection increase the chance of slip on a nearby fault?
A It reverses plate motion
B Removes fault gravity
C Melts entire crust always
D Pore pressure reduces fault resistance
Answer: D. Pore pressure reduces fault resistance. Rising pore pressure can lower effective normal stress and make fault slip easier.
Earthquake hazard differs from earthquake risk because risk also includes:
A Only the wave speed
B Exposed, vulnerable people and structures
C Only the magnitude scale
D The depth of the ocean
Answer: B. Exposed, vulnerable people and structures. Risk combines hazard with who and what are exposed and how vulnerable they are.
A tsunami is most efficiently generated by a submarine earthquake when rupture causes:
A Deep continental focus
B Horizontal slip without displacement
C Vertical seafloor displacement
D A small local aftershock
Answer: C. Vertical seafloor displacement. Vertical seafloor motion can displace a large water column and launch tsunami waves.
Which earthquake source is more likely to generate a tsunami?
A Slow creep without seafloor motion
B A quarry blast inland
C Deep continental strike-slip event
D Large shallow offshore thrust rupture
Answer: D. Large shallow offshore thrust rupture. Large shallow thrust earthquakes can lift or lower the seafloor over broad areas.
Liquefaction damage is especially common in:
A Dry massive bedrock
B A vacuum chamber
C Loose saturated sand or silt
D Strong crystalline rock at depth
Answer: C. Loose saturated sand or silt. Loose water-saturated granular soils can lose strength during shaking.
Rupture directivity can intensify shaking in a particular direction when:
A No fault rupture occurs
B All waves share one speed
C Rupture moves coherently toward site
D Site lies at antipode
Answer: C. Rupture moves coherently toward site. A rupture moving toward a site can focus energy and increase shaking in that direction.
Aftershock locations often outline:
A Unrelated volcanic chain
B Weather-front boundary
C Ruptured fault and stressed surroundings
D Future epicenter map
Answer: C. Ruptured fault and stressed surroundings. Aftershocks commonly occur on or near the ruptured fault and nearby stressed structures.
Why can a large earthquake be followed by aftershocks for months or years?
A The original magnitude keeps increasing
B Seismic waves remain trapped forever
C High-tide reopening only
D Stress adjustment continues after rupture
Answer: D. Stress adjustment continues after rupture. The main rupture changes surrounding stresses, and aftershocks can continue during readjustment.
Most earthquake energy is released as:
A Ocean tides
B Visible light only
C Seismic waves and rupture heat
D Atmospheric pressure
Answer: C. Seismic waves and rupture heat. Fault rupture releases stored elastic energy, much of which radiates as seismic waves.
Earthquake shaking can be stronger on soft ground than on nearby rock even for the same event because:
A Soft ground blocks all waves
B Epicenters move toward soft sediment
C Magnitude changes with soil type
D Local site response amplifies motion
Answer: D. Local site response amplifies motion. Local geology modifies incoming seismic motion and can amplify selected frequencies.