Difficulty: Easy & Basic
What does a clutch connect when engaged?
A Engine and transmission
B Radiator and fan
C Fuel tank and pump
D Steering wheel and rack
Answer: A. Engine and transmission. An engaged clutch transmits engine torque to the transmission input.
During engagement, what is clamped between flywheel and pressure plate?
A Release bearing
B Friction disc
C Slave cylinder
D Gear selector
Answer: B. Friction disc. The pressure plate clamps the friction disc against the flywheel.
What normally happens when the clutch pedal is fully pressed?
A Gear ratio doubles
B Differential locks
C Drive path disengages
D Engine cooling stops
Answer: C. Drive path disengages. Pressing the pedal releases clamping force and interrupts engine drive to the gearbox.
Which plate is splined to the gearbox input shaft?
A Pressure plate
B Clutch disc
C Flywheel
D Release bearing
Answer: B. Clutch disc. The clutch disc hub is splined to the transmission input shaft.
What clamps the clutch disc against the flywheel?
A Release fork
B Pressure plate
C Pilot bearing
D Master cylinder
Answer: B. Pressure plate. The pressure plate supplies the clamping force that transmits torque.
Which spring is common in modern single-plate clutches?
A Leaf spring
B Torsion bar
C Coil shock spring
D Diaphragm spring
Answer: D. Diaphragm spring. A diaphragm spring provides clamping force in many modern clutch assemblies.
What does the release bearing act on?
A Diaphragm spring fingers
B Clutch disc splines
C Flywheel ring gear
D Gear selector rails
Answer: A. Diaphragm spring fingers. The release bearing applies pedal force to the diaphragm spring fingers.
Which component provides a clutch friction face and stores rotation energy?
A Slave cylinder
B Release fork
C Flywheel
D Gear synchronizer
Answer: C. Flywheel. The flywheel provides a friction surface and stores rotational energy.
Which clutch type uses several friction plates?
A Single-plate clutch
B Multi-plate clutch
C Cone-only clutch
D Centrifugal shoe clutch
Answer: B. Multi-plate clutch. A multi-plate clutch stacks several friction plates to transmit torque.
Which clutch commonly operates with its plates in oil?
A Dry clutch
B Dog clutch
C Cone brake
D Wet clutch
Answer: D. Wet clutch. Wet clutch plates operate in an oil bath.
How does a dry clutch operate?
A Without an oil bath
B Inside coolant
C Under fuel spray
D Within brake fluid
Answer: A. Without an oil bath. A dry clutch uses friction plates that are not immersed in lubricant.
What is a common sign of clutch slip?
A Coolant level drops
B Engine revs rise without speed
C Steering becomes heavier
D Fuel gauge falls quickly
Answer: B. Engine revs rise without speed. With a slipping clutch, engine speed can rise without matching vehicle acceleration.
What does clutch drag indicate?
A Clutch fails to disengage fully
B Clutch never slips
C Gear ratio is too high
D Flywheel is oversized
Answer: A. Clutch fails to disengage fully. Clutch drag occurs when torque continues to pass after the pedal is pressed.
Why is clutch pedal free play provided?
A Increase wheelbase
B Raise fuel pressure
C Avoid constant release-bearing load
D Lock the gearbox
Answer: C. Avoid constant release-bearing load. Specified free play prevents continuous load on the release mechanism.
What do torsional damper springs in a clutch disc reduce?
A Coolant temperature
B Fuel vapor pressure
C Driveline torsional vibration
D Tire sidewall flex
Answer: C. Driveline torsional vibration. The springs absorb torsional fluctuations between the disc hub and friction plate.
Which lever moves the release bearing?
A Gear selector
B Throttle lever
C Fuel-pump arm
D Release fork
Answer: D. Release fork. The release fork transfers actuator movement to the release bearing.
What operates a cable-controlled clutch?
A Hydraulic pump
B Pedal cable
C Vacuum servo
D Coolant pressure
Answer: B. Pedal cable. A cable transmits pedal movement mechanically to the clutch release lever.
What does a clutch master cylinder create?
A Fuel pressure
B Coolant flow
C Gearbox vacuum
D Hydraulic pressure
Answer: D. Hydraulic pressure. Pedal force moves the master-cylinder piston and pressurizes clutch fluid.
Which part converts hydraulic pressure into release movement?
A Slave cylinder
B Flywheel
C Clutch disc
D Pilot bearing
Answer: A. Slave cylinder. The slave cylinder moves a pushrod or fork to release the clutch.
What is the purpose of clutch friction lining?
A Cool the radiator
B Meter fuel flow
C Provide torque-transmitting friction
D Support the crankshaft
Answer: C. Provide torque-transmitting friction. The lining creates friction between clutch disc and flywheel or pressure plate.
In normal driving, what pedal position keeps the clutch engaged?
A Pedal released
B Pedal fully pressed
C Pedal halfway down
D Pedal held at bite
Answer: A. Pedal released. With the pedal released, the pressure plate clamps the friction disc.
What is the bite point?
A Maximum steering angle
B Engine idle speed
C Gearbox oil level
D Point where drive begins transmitting
Answer: D. Point where drive begins transmitting. The bite point is where the clutch begins to transmit torque as the pedal rises.
Why engage a clutch smoothly from rest?
A Increase engine displacement
B Raise fuel octane
C Reduce shock and jerk
D Eliminate gear ratios
Answer: C. Reduce shock and jerk. Gradual engagement limits driveline shock and helps prevent stalling.
Which support can steady the transmission input shaft tip?
A Release bearing
B Pressure plate
C Clutch cover
D Pilot bearing
Answer: D. Pilot bearing. A pilot bearing supports the input shaft at the crankshaft or flywheel end.
What primarily determines a clutch’s torque capacity?
A Radiator size
B Gearbox casing color
C Fuel tank volume
D Friction and clamp force
Answer: D. Friction and clamp force. Torque capacity depends on friction, clamp load, effective radius, and friction surfaces.