In an ideal PCR, one target molecule doubles each cycle. How many copies are expected after 8 cycles, assuming perfect efficiency?
A 256
B 64
C 128
D 16
Answer: A. 256. Ideal doubling gives 2⁸, or 256, copies from one starting molecule.
A primer is written 5′→3′. Which statement about its binding is correct?
A It binds parallel and identical to the template
B It anneals antiparallel to a complementary template strand
C It binds only to a protein
D Its 5′ end must be extended by polymerase
Answer: B. It anneals antiparallel to a complementary template strand. Primer-template pairing is antiparallel, and synthesis proceeds from the primer’s 3′ end.
A gel shows one band at the predicted size, but the assay must distinguish a single product from a same-size nonspecific amplicon. What is a useful next check?
A Increase the ladder concentration
B Switch to a Western blot
C Use a melt curve or sequence the amplicon
D Omit the primers
Answer: C. Use a melt curve or sequence the amplicon. A melt profile or sequence check can evaluate product identity beyond apparent size.
A SYBR Green qPCR assay shows a low-temperature melt peak in addition to the expected product peak. What is a likely explanation?
A Protein contamination only
B Higher starting target alone
C An RNA ladder
D Primer-dimer or nonspecific amplicon
Answer: D. Primer-dimer or nonspecific amplicon. An additional lower-melting product often indicates primer dimers or nonspecific DNA.
A researcher needs absolute target copy estimates without relying on a standard curve. Which method partitions the sample into many reactions and counts positives?
A Southern blot
B Northern blot
C Digital PCR
D Sanger sequencing
Answer: C. Digital PCR. Digital PCR estimates concentration from positive and negative partitions, with statistical correction.
In hydrolysis-probe qPCR, signal rises when the probe is cleaved during extension. What does the probe contribute?
A Sequence-specific fluorescence reporting
B A new DNA template
C A restriction enzyme site
D A gel loading dye
Answer: A. Sequence-specific fluorescence reporting. A sequence-specific probe provides fluorescence as polymerase cleaves it during amplification.
A qPCR standard curve has a shallow slope compared with the expected efficient amplification range. What should be checked?
A The color of the PCR tubes
B Dilution accuracy, inhibitors and assay efficiency
C The organism’s chromosome count
D The agarose concentration only
Answer: B. Dilution accuracy, inhibitors and assay efficiency. Unexpected standard-curve slope can reflect poor efficiency, dilution errors, or inhibition.
For an RNA-expression assay, the −RT control is positive while the no-template control is negative. Which source is most likely?
A A broken thermocycler
B Contamination of every PCR reagent
C Genomic DNA carried into the RNA preparation
D A missing fluorescence dye
Answer: C. Genomic DNA carried into the RNA preparation. A product without reverse transcriptase points toward amplifiable DNA in the sample.
A variant-specific PCR should amplify only when the primer’s 3′ base matches the allele. Why place the discriminatory base at the primer’s 3′ end?
A It changes the target into RNA
B It makes the primer fluorescent
C It prevents the primer from binding any template
D A mismatch there can strongly impair extension
Answer: D. A mismatch there can strongly impair extension. A 3′-terminal mismatch can reduce polymerase extension and support allele discrimination.
A nested PCR uses an outer primer pair followed by an inner pair. What is the main rationale?
A The second pair targets within the first amplicon to improve specificity
B The second pair replaces DNA polymerase
C The first round removes all contamination
D The method measures protein abundance
Answer: A. The second pair targets within the first amplicon to improve specificity. Inner primers amplify a subregion of the first product, increasing target specificity.
What is a key risk of transferring product from the first PCR round into a nested reaction?
A Loss of all target DNA
B Carry-over amplicon contamination
C Automatic RNA degradation
D Reduced primer specificity by definition
Answer: B. Carry-over amplicon contamination. Opening first-round tubes can release abundant amplicons that contaminate later reactions.
A touchdown PCR begins with a higher annealing temperature and gradually lowers it. Why use this profile?
A To replace a reverse-transcription step
B To prevent DNA denaturation
C To favor specific early priming, then improve yield at later cycles
D To separate products by size
Answer: C. To favor specific early priming, then improve yield at later cycles. Higher early annealing stringency can improve specificity before lower temperatures support yield.
A primer pair produces products from many unrelated loci. Which design issue is a likely contributor?
A A DNA ladder in the adjacent lane
B A correctly chosen reference gene
C A higher extension temperature alone
D Poor primer specificity or excessive similarity to off-target sequences
Answer: D. Poor primer specificity or excessive similarity to off-target sequences. Primer sequences that match multiple genomic sites can yield off-target amplicons.
A PCR efficiency estimate is far above the physically plausible doubling limit. What is the best response?
A Check standard dilutions, thresholding and nonspecific signal
B Accept it as proof of faster-than-doubling DNA replication
C Delete the no-template control
D Replace the template with protein
Answer: A. Check standard dilutions, thresholding and nonspecific signal. Implausible efficiency often signals technical or analysis problems rather than extraordinary amplification.
A restriction enzyme digest before Southern blotting creates fragments that are too large to resolve well. Which change may improve separation?
A Use a Western blot antibody
B Choose an enzyme that cuts the DNA more frequently outside the target region
C Remove the membrane transfer step
D Replace the probe with a primer
Answer: B. Choose an enzyme that cuts the DNA more frequently outside the target region. A suitable restriction digest can generate fragments in a size range the gel resolves.
A Southern blot gives a weak signal despite intact transfer. Which factor directly affects probe hybridization specificity?
A The well comb size
B The protein molecular-weight marker
C Probe-target complementarity and hybridization stringency
D The sample’s cell shape
Answer: C. Probe-target complementarity and hybridization stringency. Sequence matching and wash/hybridization stringency influence probe binding and signal.
In Sanger sequencing, the target region has a long homopolymer tract and the chromatogram becomes difficult to read beyond it. Why?
A ddNTPs cannot terminate DNA
B The polymerase switches to RNA
C The gel has no electric field
D Overlapping termination fragments can compress or blur peak resolution
Answer: D. Overlapping termination fragments can compress or blur peak resolution. Many similar-length products in a homopolymer region can make downstream peaks ambiguous.
A FISH probe gives no signal, while a control probe works on the same slide. Which assay-specific explanation is plausible?
A The target sequence may be absent, inaccessible, or poorly matched to the probe
B The microscope proves every chromosome is missing
C The control probe has become an antibody
D DNA has no charge
Answer: A. The target sequence may be absent, inaccessible, or poorly matched to the probe. A failed target signal can reflect target absence, hybridization access, or probe mismatch.
A microarray comparison shows greater fluorescence for one probe in condition A than B. What can be concluded most carefully?
A The corresponding protein is necessarily more abundant
B More labeled sample nucleic acid hybridized to that probe under the assay conditions
C The gene is permanently activated in every tissue
D The probe directly measures enzyme activity
Answer: B. More labeled sample nucleic acid hybridized to that probe under the assay conditions. Array fluorescence reflects hybridization signal and needs normalization and validation for biological interpretation.
A multiplex reaction loses one target band while other targets amplify. Which design issue should be examined?
A The order of the sample labels
B Whether DNA is negatively charged
C Primer competition, target abundance and pair-specific conditions
D The Western blot transfer buffer
Answer: C. Primer competition, target abundance and pair-specific conditions. Multiplex targets can compete or differ in efficiency, so each primer pair must be optimized in combination.
A PCR product contains a 5′ noncomplementary tail that encodes a restriction site. How can the tail be incorporated?
A A gel stain ligates it to DNA
B Taq reads protein sequence and adds it
C A ddNTP inserts it after amplification
D The primer’s 5′ extension is copied into later amplicons
Answer: D. The primer’s 5′ extension is copied into later amplicons. The primer’s 3′ region anneals to template while its 5′ tail becomes part of the product after extension.
An internal amplification control fails along with the target in a diagnostic PCR. What does that pattern suggest?
A Possible inhibition or general reaction failure
B A confirmed target-negative result with no caveat
C A confirmed target-positive result
D The internal control is a protein
Answer: A. Possible inhibition or general reaction failure. Failure of both target and internal control makes inhibition or assay failure a concern.
A qPCR assay uses primers spanning an exon-exon junction. What is the intended benefit?
A Amplification of all proteins
B Preferential amplification of cDNA over genomic DNA
C Removal of the need for reverse transcription
D Direct detection of restriction fragments
Answer: B. Preferential amplification of cDNA over genomic DNA. A junction-spanning primer can reduce amplification of genomic DNA lacking the spliced junction.
A dilution series yields inconsistent Cq shifts between replicate wells. What should be reviewed first?
A The DNA ladder’s band count
B The species name of Taq polymerase only
C Pipetting, mixing and dilution preparation
D The Southern blot membrane
Answer: C. Pipetting, mixing and dilution preparation. Small-volume pipetting and mixing errors can distort replicate concentrations and Cq values.
A DNA ladder appears as a smear rather than discrete bands. Which explanation is most plausible?
A Taq amplified the ladder during staining
B The ladder was reverse-transcribed
C The sample has no phosphate groups
D The marker may be degraded or overloaded, or the gel/run conditions may be poor
Answer: D. The marker may be degraded or overloaded, or the gel/run conditions may be poor. Smearing can result from damaged DNA, overloading, or electrophoresis problems.