Industrial Biotechnology MCQs (Set-3)

Difficulty: Medium

Evaluate an industrial process that makes 120 g/L of product in 8 hours. What is its average volumetric productivity?

A 15 g L⁻¹ h⁻¹
B 0.067 g L⁻¹ h⁻¹
C 128 g L⁻¹ h⁻¹
D 960 g L⁻¹ h⁻¹

A plant produces 80 kg of product per batch from 200 kg of substrate consumed. What is the product yield on substrate?

A 0.40 kg/kg
B 2.5 kg/kg
C 0.004 kg/kg
D 280 kg/kg

A product is recovered at 80% yield in one step and 75% in a second. What fraction of the original product remains after both steps?

A 80%
B 15%
C 95%
D 60%

Glucose fermentation follows C₆H₁₂O₆ β†’ 2 ethanol + 2 COβ‚‚. Using molar masses 180 g/mol glucose and 46 g/mol ethanol, the theoretical ethanol yield is closest to

A 2.00 g/g
B 0.26 g/g
C 0.51 g ethanol per g glucose
D 1.96 g/g

A continuous enzyme reactor has a 2,000 L working volume and a feed rate of 500 L/h. What is the nominal residence time?

A 1,500 h
B 0.25 h
C 4 h
D 2,500 h

A product stream contains 10 kg of target in 1,000 kg total broth. What is the target mass fraction?

A 10%
B 1%
C 0.1%
D 100%

An immobilized enzyme reactor conversion drops when flow is doubled, but catalyst activity in a batch assay is unchanged. Which cause is most likely?

A the substrate concentration became zero by definition
B shorter residence time limits substrate conversion
C the product turned into an antibody
D the enzyme has become a plant cell

A process has product yield 0.3 g/g and consumes 100 kg feedstock. Assuming the same yield, how much product is formed?

A 300 kg
B 30 kg
C 0.3 kg
D 3 kg

A hydrolysis step releases 70 kg fermentable sugars, but only 56 kg are recovered. What is the sugar-recovery efficiency?

A 80%
B 70%
C 14%
D 40%

A plant needs 500 kg of product at a recovery of 50%. How much product must be present before recovery, assuming no other losses?

A 500 kg
B 750 kg
C 1,000 kg
D 250 kg

A continuous process is run at a feed flow of 3 mΒ³/h through a 12 mΒ³ reactor. What is the dilution rate?

A 0.25 h⁻¹
B 0.04 h⁻¹
C 4 h⁻¹
D 36 h⁻¹

A starch hydrolysate is fermented with yeast. Carbon dioxide evolution rises, but ethanol titer stalls while residual sugar remains high. Which interpretation is best?

A all sugar has been consumed
B fermentation may be inhibited or otherwise limited despite available substrate
C ethanol must be completely absent
D the process has become a plant tissue culture

A downstream train recovers 90% of target in clarification, then 80% in chromatography. What is total recovery?

A 170%
B 10%
C 85%
D 72%

An enzyme’s measured specific activity falls after immobilization, but the catalyst is reused for many cycles. Which economic comparison is most relevant?

A only initial activity in one test tube
B the number of genes in the production host
C total product made per enzyme cost over its useful lifetime
D the color of the support

A feedstock pretreatment increases sugar release but also produces inhibitors. What is the best process-development tradeoff?

A remove all pretreatment products before measuring sugars
B maximize severity regardless of fermentation performance
C optimize pretreatment for fermentable sugar recovery and acceptable inhibitor levels
D choose conditions based only on biomass color

A continuous plant has the same product titer as a batch plant but produces twice as much product per reactor volume per day. Which is higher?

A enzyme molecular mass
B substrate purity
C volumetric productivity
D product concentration

The bioprocess requires 100 kg sugar and feedstock contains 50% fermentable sugar by mass. What minimum feedstock mass is required before processing losses?

A 200 kg
B 150 kg
C 50 kg
D 100 kg

A fermentation process consumes sugar rapidly but accumulates little product. Which measurement helps distinguish a low-yield process from a slow one?

A broth color alone
B vessel volume alone
C the number of sampling ports
D product yield per substrate consumed

Two enzyme processes produce the same amount of product, but one uses a much smaller reactor per hour. Which metric captures rate per volume?

A volumetric productivity
B substrate purity only
C specific antibody titer
D cell morphology

A process gives a high final product concentration but takes several days longer than a competitor. Which metric should be compared to evaluate production rate?

A only product titer
B the enzyme’s molecular weight
C the initial inoculum color
D space-time yield or volumetric productivity

An enzyme reactor has good activity in small beads but low overall conversion at high flow. Which limitation is plausible?

A high antibody specificity
B excessive gene expression in a plant
C lack of a reporter gene
D substrate diffusion into the immobilized catalyst

A biorefinery receives biomass with variable moisture and composition. What is a sound operating response?

A characterize and adjust feed preparation and process conditions
B add the same amount of enzyme without checking substrate
C stop measuring solids content
D assume each feed lot is identical

A concentrated lignocellulose hydrolysate inhibits the fermenting microbe. Which process change could help?

A switch off temperature control
B adjust pretreatment or detoxify/dilute the hydrolysate
C increase inhibitor concentration
D remove all fermentable sugars

An industrial fermentation produces a dilute aqueous stream. Why can product separation dominate cost?

A dilute products never require purification
B large volumes must be processed to recover a relatively small amount of product
C fermentation automatically concentrates all products
D downstream processing creates no energy demand

A factory switches from batch to continuous production using an immobilized enzyme. Which issue must still be monitored?

A whether the enzyme can translate DNA
B the plant’s pollination rate
C only the startup label
D catalyst activity, mass transfer, and product quality over time