Fluid Mechanics MCQs (Set-2)

Difficulty: Easy & Basic

Pressure rise 2 m below water’s surface is approximately what?

A 19.6 kPa
B 2.0 kPa
C 9.8 kPa
D 39.2 kPa

For a static liquid, hydrostatic pressure at a point depends on depth and what?

A Fluid density
B Container width
C Surface colour
D Vessel shape

On a vertical submerged plane, the center of pressure usually lies where relative to its area centroid?

A Above the centroid
B Below the centroid
C At the free surface
D Outside the fluid

The center of buoyancy is the centroid of which volume?

A Entire vessel
B Solid material
C Freeboard region
D Displaced fluid

Matching the liquid’s density, an immersed body tends to do what?

A Rise to surface
B Sink to bottom
C Remain neutrally suspended
D Float fully above

For small heel, a floating body is initially stable when its metacenter is where relative to its center of gravity?

A Above the center
B Below the center
C At the keel
D Outside the fluid

Cavitation can begin when local absolute pressure falls below which pressure?

A Vapour pressure
B Atmospheric pressure always
C Stagnation pressure
D Critical pressure

At a fixed temperature, which property sets the threshold for liquid vaporization?

A Gauge pressure
B Vapour pressure
C Dynamic pressure
D Hydraulic grade

In a narrow wetting tube, capillary rise is mainly caused by what?

A Surface tension
B Fluid inertia
C Pipe friction
D Vapour pressure

With complete wetting, the contact angle is approximately what?

A 45°
B 0°
C 90°
D 180°

At rest, a fluid cannot sustain which stress component?

A Shear stress
B Normal pressure
C Hydrostatic stress
D Compressive stress

Manometer readings primarily use which measurement?

A Fluid colour change
B Pipe vibration
C Liquid-column height
D Surface temperature

Hydraulic-press force multiplication follows which ratio?

A Piston-speed ratio
B Fluid-density ratio
C Pipe-length ratio
D Piston-area ratio

Fully developed laminar flow in a circular pipe has which velocity profile?

A Uniform
B Triangular
C Logarithmic
D Parabolic

Compared with laminar pipe flow, a turbulent velocity profile is generally what?

A More sharply parabolic
B Flatter near core
C Exactly linear
D Uniform to wall

Reynolds number uses which length in internal pipe flow?

A Pipe diameter
B Pipe length
C Wall thickness
D Hydraulic head

Reynolds number has which dimensional status?

A Length-valued
B Time-valued
C Dimensionless
D Pressure-valued

As a pipe entrance flow develops, boundary layers grow from which locations?

A Centreline only
B Pipe walls
C Inlet corners only
D Free surface

Hydraulic diameter is four times flow area divided by what?

A Pipe length
B Fluid density
C Free-surface width
D Wetted perimeter

For fully developed laminar pipe flow, the Darcy friction factor depends primarily on what?

A Wall roughness only
B Pipe colour
C Fluid depth
D Reynolds number

Mach number is flow speed divided by what?

A Light speed
B Wave height
C Sound speed
D Pipe speed

Froude number compares inertia with which restoring effect?

A Viscosity
B Surface roughness
C Gravity
D Compressibility

Static pressure force acts in which direction on a surface?

A Along the surface
B Along streamlines
C Toward the outlet
D Normal to the surface

When a floating body is displaced slightly, a stable body produces which moment?

A Increasing heel moment
B Zero buoyancy
C Restoring moment
D Constant acceleration

In an open U-tube with the same liquid in both legs, pressure difference depends on what?

A Tube diameter
B Level difference
C Tube colour
D Total tube length