Answer: A. Electronic distance and angle measurement. A total station electronically measures angles and distances to compute point coordinates.
EDM in surveying means…
A Elevation difference mapping
B Earth datum modeling
C Electronic distance measurement
D Error detection matrix
Answer: C. Electronic distance measurement. EDM instruments measure distance using electromagnetic signals.
GNSS positioning uses…
A Only aerial photographs
B Signals from navigation satellites
C Groundwater pressure
D Magnetic north alone
Answer: B. Signals from navigation satellites. GNSS receivers use signals from satellite navigation constellations to estimate position and time.
GIS is mainly used to…
A Measure concrete slump
B Store and analyze spatial data
C Test steel hardness
D Control a pump motor
Answer: B. Store and analyze spatial data. A GIS links geographic location with attribute data for storage, analysis and mapping.
A raster GIS layer represents space as…
A Connected line segments only
B Grid cells or pixels
C Unordered field notes
D Survey monuments only
Answer: B. Grid cells or pixels. Raster data divide space into cells, each storing a value.
A vector GIS layer stores…
A Only image pixels
B Sound waves
C Points, lines and polygons
D Satellite orbits only
Answer: C. Points, lines and polygons. Vector data represent discrete features as points, lines and polygons.
Remote sensing collects information…
A Only by ground tape
B Without direct contact
C By digging test pits
D Through concrete cores
Answer: B. Without direct contact. Remote sensing observes objects using sensors without direct physical contact.
Photogrammetry derives measurements from…
A Overlapping images
B Only water samples
C Soil boreholes
D Magnetic compass readings
Answer: A. Overlapping images. Photogrammetry extracts geometry and measurements from overlapping photographs.
A map datum defines…
A Reference framework for coordinates
B Road surface texture
C Contour interval only
D Image brightness range
Answer: A. Reference framework for coordinates. A geodetic datum specifies the reference framework and origin for positions.
A survey control point has…
A Unknown location only
B No monument or record
C A changing map scale
D Known reference coordinates
Answer: D. Known reference coordinates. Control points provide known coordinates for tying measurements and maps to a reference system.
A traverse is a series of…
A Satellite images only
B Vertical boreholes
C River cross-sections only
D Connected measured survey lines
Answer: D. Connected measured survey lines. Traverses connect measured stations and support coordinate control.
GNSS satellite geometry affects…
A Concrete strength
B Instrument weight
C Map color palette
D Positioning quality
Answer: D. Positioning quality. Satellite geometry influences solution precision and dilution of precision.
Multipath occurs when satellite signals…
A Reflect before reaching receiver
B Stop at the antenna
C Travel through a prism
D Are generated underground
Answer: A. Reflect before reaching receiver. Reflected signals can arrive with delay and bias a GNSS measurement.
RTK GNSS uses…
A Only static photographs
B Manual contouring
C Real-time reference corrections
D A single uncorrected receiver
Answer: C. Real-time reference corrections. Real-time kinematic positioning uses a reference station or network corrections for precise field positions.
A digital elevation model stores…
A Building ownership only
B Ground elevation values
C Soil chemistry only
D Traffic counts only
Answer: B. Ground elevation values. A DEM represents terrain elevations in a digital surface grid or model.
LiDAR measures distance using…
A Sound in water
B Magnetic fields
C Visible paint marks
D Laser pulses
Answer: D. Laser pulses. LiDAR estimates range from emitted laser pulses and their returns.
An orthophoto is corrected for…
A Only image color
B Only road names
C Relief and camera geometry
D Only cloud cover
Answer: C. Relief and camera geometry. Orthorectification removes geometric distortions due to terrain and sensor geometry.
A map projection converts…
A Pixels to sound
B Height to temperature
C Distance to mass
D Curved Earth to flat map
Answer: D. Curved Earth to flat map. Map projections transform positions on a curved reference surface into planar coordinates.
Georeferencing links a dataset to…
A A file extension
B A coordinate system
C A sensor battery
D A map legend only
Answer: B. A coordinate system. Georeferencing assigns spatial coordinates to data using control or reference information.
A GIS attribute table stores…
A Satellite signals only
B Image overlap only
C Survey tripod settings
D Feature descriptions and values
Answer: D. Feature descriptions and values. Attribute tables associate descriptive information with mapped features.
Spatial resolution describes…
A Ground detail per image cell
B Number of map layers
C Satellite count only
D Surveyor skill level
Answer: A. Ground detail per image cell. Spatial resolution indicates the ground area represented by a pixel or cell.
A contour line connects points of equal…
A Elevation
B Slope direction
C Soil moisture
D Magnetic bearing
Answer: A. Elevation. Contours join locations with the same elevation.
A prism in total-station work returns…
A Measurement signal
B GNSS ephemeris
C A soil sample
D A map projection
Answer: A. Measurement signal. A prism reflects the instrument’s distance-measurement signal toward the total station.
A GNSS receiver needs a clear sky view to reduce…
A Map projection distortion
B Contour interpolation
C Signal blockage and multipath
D Image color noise
Answer: C. Signal blockage and multipath. Obstructions block satellites and nearby reflective surfaces can cause multipath.
A UAV survey commonly uses images to create…
A Hydraulic grade lines only
B Borehole logs only
C Orthomosaics and surface models
D Steel connection drawings
Answer: C. Orthomosaics and surface models. Overlapping UAV images can be processed into orthomosaics and 3D surface products.