World Mineral Resources MCQs (Set-3)

Difficulty: Medium

A broad orebody lies close to the surface and covers a large area. Which mining method is generally best suited to extracting it?

A Deep shaft mining only
B Open-pit mining
C Drift mining beneath an aquifer
D Underground room-and-pillar mining only

A narrow orebody continues far below the surface. Which method is most likely to reach it?

A Dredging a river bar
B Surface strip mining
C Quarrying topsoil
D Underground shaft and tunnel mining

Gold grains become concentrated in a river bend after lighter sediment is carried away. What type of deposit is this?

A Placer deposit
B Evaporite bed
C Coal seam
D Hydrothermal vein

Many tropical bauxite deposits form after intense weathering removes soluble material and leaves aluminium-rich residue. This is what deposit process?

A Glacial deposition
B Peat accumulation
C Residual concentration
D Marine salt precipitation

Halite and gypsum may accumulate when saline water evaporates in a closed basin. These deposits are called what?

A Placer deposits
B Evaporites
C Volcanic bombs
D Till deposits

Minerals filling cracks after hot, mineral-rich fluids move through rock are commonly described as what?

A Alluvial terraces
B Glacial moraines
C Coal measures
D Hydrothermal vein deposits

Chromite and some platinum-group ores can concentrate as dense minerals crystallize and settle in a cooling magma chamber. This is an example of what?

A Wind deflation
B River braiding
C Magmatic segregation
D Marine transgression

During ore processing, what is the name for unwanted material mixed with the valuable mineral?

A Gangue
B Tailings pond
C Overburden
D Concentrate

Crushing and separating ore to raise the proportion of valuable minerals before smelting is known as what?

A Reclamation
B Leaching runoff
C Subsidence
D Beneficiation

Which step uses high temperatures and chemical reduction to separate a metal from a concentrated ore?

A Contour mining
B Smelting
C Revegetation
D Dewatering

In a surface mine, what is the name for soil and rock removed to expose the ore body?

A Alluvium
B Gangue concentrate
C Overburden
D Placer gold

Fine-grained waste left after valuable minerals are separated from crushed ore is called what?

A Tailings
B Spodumene
C Overburden
D Flux

Acid mine drainage can develop when sulfide minerals are exposed to which combination?

A Pure nitrogen only
B Frozen snow and sunlight only
C Air and water
D Dry sand without oxygen

Ground movement above abandoned underground workings can cause what environmental hazard?

A Coastal upwelling
B Land subsidence
C Deflation hollows
D Coral bleaching

Why do mines pump water from deep pits and tunnels?

A To turn ore into renewable material
B To raise the groundwater table everywhere
C To remove all need for ventilation
D To keep workings dry and safe for extraction

After a mine closes, reshaping disturbed land and restoring drainage and vegetation is called what?

A Mine reclamation
B Beneficiation
C Ore sorting
D Smelting

Why is revegetation used on reclaimed mine land?

A It converts all waste rock into metal
B Plant cover helps stabilize soil and reduce erosion
C It increases runoff into streams
D It prevents the need to monitor the site

How can recycling copper and aluminium help conserve mineral resources?

A It makes ores more concentrated underground
B It eliminates every processing step
C It supplies metal from scrap and reduces demand for newly mined ore
D It turns metals into renewable crops

Recovering metals from discarded phones, computers and circuit boards is commonly called what?

A Strip mining
B Placer mining
C Deep-sea drilling
D Urban mining

A geologist marks the lowest ore concentration that can be mined profitably under stated conditions. What is this threshold called?

A Cut-off grade
B Strike length
C Water table
D Overburden ratio

Why can processing a lower-grade ore body require more energy and create more waste per tonne of metal?

A Low-grade ore contains no minerals
B It eliminates the need for crushing
C It always lies beside a power plant
D More rock must be mined and processed to obtain the same metal amount

Which method exposes shallow, nearly horizontal coal seams by removing successive layers of overlying rock?

A Shaft mining
B Strip mining
C Dredging
D Solution mining

Which safety measure is essential in many underground mines to reduce the risk of gas buildup?

A Flooding the workings
B Sealing every airway
C Ventilation through shafts and tunnels
D Removing roof supports

Why are traceability standards relevant to minerals used in global supply chains?

A They can help identify origin and reduce risks linked to conflict or harmful labor practices
B They make mineral deposits renewable
C They guarantee every mine has zero environmental impact
D They remove the need for geological surveys

What is a likely downstream effect when an exposed mine site sends large amounts of loose sediment into nearby streams?

A Permanent increase in groundwater purity
B Formation of a new ocean basin
C Higher turbidity and sedimentation in waterways
D Automatic recovery of aquatic habitats
259