What oval, domed mound can form when a lava-flow crust is pushed upward from below?
A Scoria cone
B Tumulus
C Lava delta
D Maar
Answer: B. Tumulus. A tumulus is a domed or elliptical mound that forms when slowly moving lava swells beneath a solidifying crust. Internal pressure lifts the roof, preserving a raised feature on the surface of the lava flow.
An elongated ridge of ejecta built along an eruptive fissure is called a:
A Maar
B Diatreme
C Tuff cone
D Rampart
Answer: D. Rampart. A rampart is an elongated accumulation of pyroclastic material along a fissure. Unlike a roughly circular cone around one central vent, its shape records the extended line from which ejecta emerged.
Which broad, shallow crater cuts into the pre-eruption landscape and may hold a lake?
A Maar
B Caldera
C Crater lake
D Lava tube
Answer: A. Maar. A maar is a broad, low-relief crater formed by shallow explosive activity, commonly involving magma and groundwater. Its floor lies below the surrounding land, so water can later collect inside the depression.
The subsurface, commonly breccia-filled pipe beneath a maar is a:
A Laccolith
B Batholith
C Diatreme
D Sill
Answer: C. Diatreme. A diatreme is the subsurface structure beneath a maar crater. It is a pipe-like body containing fragmented volcanic material and country rock, created as repeated explosions move debris within the shallow crust.
A steep cone with its crater raised above the former ground surface may form during shallow-water eruptions. It is a:
A Scoria cone
B Lava dome
C Tuff ring
D Tuff cone
Answer: D. Tuff cone. Tuff cones are constructional landforms produced by explosive interaction between magma and surface or shallow water. Their cone rises above the pre-eruption surface, unlike a maar crater excavated below it.
A low-profile ejecta ring surrounding a phreatomagmatic crater is commonly called a:
A Lava rampart
B Tephra ring
C Spatter cone
D Dike
Answer: B. Tephra ring. A tephra ring is a low rim of ejected material around a crater, often associated with maar-forming activity. Its deposits can include fragments thrown out by blasts, currents moving outward, and airborne fallout.
What small rootless spatter cone can be supplied by a lava-tube network?
A Hornito
B Maar
C Diatreme
D Batholith
Answer: A. Hornito. A hornito is a small cone built above a rootless vent on a lava flow. At Kīlauea, USGS describes hornitos supplied by lava-tube networks, rather than by a separate deep central conduit.
A cone produced when flowing lava explosively interacts with wet ground, without a deep feeder vent, is a:
A Scoria cone
B Tuff cone
C Rootless cone
D Lava dome
Answer: C. Rootless cone. Rootless cones form when lava encounters wet or water-saturated ground and generates steam-driven explosions. They are called rootless because the eruptive vent is created within the flow rather than connected to a deep magma conduit.
Where does a littoral cone most directly form?
A Summit crater
B Coastal lava entry
C Rift valley
D Glacier margin
Answer: B. Coastal lava entry. A littoral cone can grow where lava pours into seawater at a shoreline. Rapid steam generation fragments lava, and the resulting hot debris accumulates near the entry point to build a coastal cone.
A long fracture that may split the crest of an inflated lava mound is an:
A Ring fault
B Radial joint
C Cooling crack
D Axial fracture
Answer: D. Axial fracture. Pressure beneath a solidified flow crust can lift it into a tumulus and stretch the crust along the mound. USGS descriptions note that this pressure may produce a fracture following the tumulus axis.
A lava flow that thickens as new lava is supplied beneath its crust undergoes:
A Cooling
B Flow inflation
C Ash settling
D Cone collapse
Answer: B. Flow inflation. Flow inflation occurs as lava continues to move beneath a crust that has already formed at the surface. The added molten material raises or thickens the flow without requiring a separate new layer to be poured over it.
The study of volcanic ash layers to establish ages and correlate deposits is:
A Tephrochronology
B Seismology
C Petrography
D Hydrology
Answer: A. Tephrochronology. Tephrochronology combines the study of volcanic ash with compositional and chronological evidence. Scientists use it to establish age control and correlate matching ash layers between separate sedimentary basins and other geological records.
Which component is commonly analyzed to create a chemical fingerprint for matching tephra layers?
A Glass shards
B Lava crust
C River sand
D Clay nodules
Answer: A. Glass shards. Volcanic glass shards preserve chemical information about the magma that produced an ash deposit. Laboratory analysis compares that composition with reference samples, helping geologists identify and correlate the same tephra across distant sites.
A distinctive ash layer found in separate sediment basins is especially useful for:
A Measuring slope
B Mapping faults
C Correlating strata
D Tracing rivers
Answer: C. Correlating strata. A widespread tephra layer can settle across different environments during one eruption. Recognizing the same layer in separated basins lets researchers correlate their sediment sequences and place events on a shared chronological framework.
A dated tephra bed within sediment can provide age control for:
A Nearby fossils
B Modern rainfall
C River discharge
D Coincident deposits
Answer: D. Coincident deposits. A tephra layer with a reliable age can anchor the timing of deposits formed at the same time or bracketed by it. This helps estimate when surrounding sediments, ecological changes, or geological events occurred.
Porous silica deposited from hot spring or geyser water is called:
A Travertine
B Basalt
C Sinter
D Obsidian
Answer: C. Sinter. Siliceous sinter forms when silica-bearing thermal water cools or loses dissolved material near the surface. It can accumulate as porous crusts, mounds, or cones around springs and geysers in geothermal areas.
Calcium-carbonate terraces around some thermal springs are made of:
A Travertine
B Sinter
C Scoria
D Tuff
Answer: A. Travertine. Travertine is a calcium-carbonate deposit formed from mineral-rich water. At some thermal springs, it builds conspicuous terraces as water reaches the surface, cools, and loses carbon dioxide that had kept carbonate dissolved.
A bubbling pool of acidic muddy water in a geothermal area is a:
A Geyser
B Fumarole
C Mud pot
D Lava lake
Answer: C. Mud pot. A mud pot develops where heat, acidic water, and altered volcanic rock create a muddy hydrothermal pool. The water is limited enough that gases and steam can churn the clay-rich material into bubbles.
The yellow-brown alteration product that can form from basaltic glass in water is:
A Sinter
B Palagonite
C Obsidian
D Scoria
Answer: B. Palagonite. Palagonite is an alteration product of basaltic glass, particularly where volcanic glass interacts with water. With continued alteration and cementation, palagonitized tephra can consolidate into palagonite tuff, as observed at Surtsey.
The broad change of volcanic-rock minerals by heated circulating fluids is called:
A Erosion
B Welding
C Inflation
D Hydrothermal alteration
Answer: D. Hydrothermal alteration. Hydrothermal alteration occurs when heated water and gases react with volcanic rocks and change their minerals or textures. The process may form clay-rich zones, silica deposits, and other minerals around geothermal systems.
Spherical aggregates of fine volcanic ash formed in moist eruption clouds are:
A Pele’s tears
B Accretionary lapilli
C Lava bombs
D Pillow lavas
Answer: B. Accretionary lapilli. Accretionary lapilli are rounded aggregates made as fine ash adheres in layers around small nuclei within a moist eruption column. Water vapour and turbulence help the particles grow before they fall back to the ground.
Rock formed by widespread deposition and consolidation of pyroclastic density currents is:
A Ignimbrite
B Limestone
C Conglomerate
D Schist
Answer: A. Ignimbrite. Ignimbrite is the rock produced when pyroclastic density currents deposit and consolidate their material over broad areas. Depending on temperature and composition, parts of a deposit may be welded, while other parts remain non-welded.
Fragments of older country rock carried within a volcanic ejecta deposit are called:
A Phenocrysts
B Pumice
C Lithic clasts
D Glass shards
Answer: C. Lithic clasts. Lithic clasts are fragments of older, pre-existing rock incorporated into volcanic ejecta. Explosions that form a maar can excavate underlying strata and surrounding bedrock, so the resulting ring may contain abundant country-rock fragments.
Near-surface oxidation of volcanic hydrogen sulfide can produce which acid in steam-heated waters?
A Carbonic acid
B Sulfuric acid
C Nitric acid
D Hydrochloric acid
Answer: B. Sulfuric acid. Hydrogen sulfide rising from hydrothermal fluids can oxidize where oxygen is available near the surface. This reaction forms sulfuric acid and contributes to low-pH, sulfate-rich waters in steam-heated volcanic areas.
Fresh volcanic ash may carry surface coatings of soluble material produced by interactions with:
A River sediments
B Soil bacteria
C Snow crystals
D Volcanic gas aerosols
Answer: D. Volcanic gas aerosols. Freshly fallen ash can have soluble salts and moisture on its surface. USGS explains that these coatings can form when ash particles interact with volcanic gas aerosols, including acidic droplets, in an eruption column.