Kelvin-Planck statement forbids a cyclic device converting all heat into what?
A Entropy
B Pressure
C Work
D Mass
Answer: C. Work. No cyclic heat engine can convert heat from one reservoir entirely into work.
Clausius statement says heat cannot flow spontaneously from what?
A Hot to cold
B High pressure to low
C Solid to liquid
D Cold to hot
Answer: D. Cold to hot. Heat does not flow from a colder body to a hotter body without external work.
Entropy is a thermodynamic what?
A Path function
B Heat-transfer mode
C State property
D Mechanical linkage
Answer: C. State property. Entropy is a property whose change depends only on the end states.
Entropy generation for an irreversible process is what?
A Negative
B Always zero
C Undefined always
D Positive
Answer: D. Positive. Irreversibility generates entropy; the second law requires nonnegative generation.
For a reversible adiabatic process, entropy change is what?
A Zero
B Positive
C Negative
D Equal to heat
Answer: A. Zero. A reversible adiabatic process is isentropic.
The Clausius inequality for a cycle states what?
A Integral δQ/T ≥ 1
B Integral δQ/T ≤ 0
C Integral work = 0
D Integral pressure = 0
Answer: B. Integral δQ/T ≤ 0. For any cycle, the integral of δQ/T is less than or equal to zero.
The entropy of an isolated system can do what?
A Only decrease
B Become negative always
C Vary without limit downward
D Stay constant or increase
Answer: D. Stay constant or increase. The second law requires entropy of an isolated system to remain constant for reversible change or increase for irreversible change.
Exergy is the maximum useful work relative to what?
A Environment state
B Critical point
C Triple point
D Boiler pressure
Answer: A. Environment state. Exergy measures the maximum useful work as a system comes to equilibrium with its environment.
Exergy destroyed equals ambient temperature times what?
A Internal energy
B Mass flow
C Entropy generation
D Specific volume
Answer: C. Entropy generation. The Gouy-Stodola relation gives exergy destruction as T0 times entropy generation.
Carnot heat-engine efficiency is what?
A 1 − TH/TL
B 1 − TL/TH
C TL/TH
D TH − TL
Answer: B. 1 − TL/TH. The Carnot efficiency depends only on absolute reservoir temperatures.
The maximum engine efficiency depends on which temperatures?
A Working fluid mass
B Piston diameter
C Cycle duration
D Hot and cold reservoirs
Answer: D. Hot and cold reservoirs. A reversible engine’s maximum efficiency depends only on source and sink temperatures.
Friction and finite-temperature heat transfer are what?
A State properties
B Irreversibilities
C Ideal processes
D Conserved quantities
Answer: B. Irreversibilities. Friction and heat transfer across finite temperature differences generate entropy.
Free expansion of an ideal gas into vacuum causes what entropy change?
A Decrease
B Increase
C No change always
D Infinite negative change
Answer: B. Increase. Free expansion is irreversible and produces a positive entropy change for an ideal gas.
Entropy transfer with heat at boundary temperature T is what?
A T / Q
B Q / T
C Q times pressure
D Mass / volume
Answer: B. Q / T. For heat transfer at boundary temperature T, entropy transfer is Q/T.
For an ideal gas, entropy change depends on temperature and what?
A Pressure or volume
B Color and shape
C Gear ratio
D Surface roughness
Answer: A. Pressure or volume. Ideal-gas entropy change can be expressed with temperature and pressure or specific volume changes.
The Gibbs relation for a simple compressible substance is what?
A Tds=pdu
B h=u−pv
C Tds=du+pdv
D q=pV
Answer: C. Tds=du+pdv. For a simple compressible substance, Tds = du + p dv.
On a T-s diagram, reversible heat transfer is area under what?
A Pressure line
B Volume axis
C Process curve
D Enthalpy axis
Answer: C. Process curve. For an internally reversible process, δq_rev = T ds, so heat equals area under the T-s curve.
An h-s chart is also called a what?
A Mollier diagram
B p-v diagram
C T-x chart
D Psychrometric chart
Answer: A. Mollier diagram. The Mollier diagram plots enthalpy against entropy.
Dalton’s law applies to ideal-gas mixtures and states total pressure equals what?
A Sum partial pressures
B Product of mole fractions
C Mean temperature
D Sum volumes only
Answer: A. Sum partial pressures. Dalton’s law says total pressure is the sum of constituent partial pressures.
A gas component partial pressure equals mole fraction times what?
A Specific volume
B Total pressure
C Gas constant
D Temperature difference
Answer: B. Total pressure. For an ideal-gas mixture, partial pressure is y_i times the mixture total pressure.
Mixture specific heat on mass basis uses which weighting?
A Mole fractions only
B Volume fractions only
C Pressure ratios
D Mass fractions
Answer: D. Mass fractions. Mass-based mixture heat capacity is the sum of component heat capacities weighted by mass fraction.
Stoichiometric air supplies exactly enough oxygen for what?
A Partial combustion
B Cooling only
C Complete combustion
D Fuel vaporization
Answer: C. Complete combustion. Stoichiometric air provides the theoretical oxygen needed for complete combustion.
Excess air is air supplied above what amount?
A Stoichiometric requirement
B Exhaust flow
C Critical flow
D Saturation amount
Answer: A. Stoichiometric requirement. Excess air is the amount above the theoretical stoichiometric air requirement.
Complete combustion of a hydrocarbon ideally forms carbon dioxide and what?
A Water vapor
B Carbon monoxide only
C Solid carbon
D Hydrogen peroxide
Answer: A. Water vapor. Complete hydrocarbon combustion produces carbon dioxide and water.
Fuel heating value measures energy released per what?
A Unit exhaust volume
B Unit air pressure
C Engine revolution
D Unit fuel amount
Answer: D. Unit fuel amount. Heating value is the energy released per unit mass or mole of fuel during combustion.