Textile Fibres MCQs (Set-4)

Difficulty: Hard

Drawing a filament generally improves which axial feature?

A Natural cellulose content
B Wool-scale density
C Molecular orientation
D Coconut-husk fraction

Regenerated viscose cellulose commonly has which crystal form?

A Cellulose I
B Keratin II
C Cellulose II
D Polyamide VI

A low-maturity cotton fibre typically has what structure?

A Very thick cortex
B Thin secondary wall
C No central lumen
D Silk-protein coating

Which silk-fibroin structure contributes to its strength?

A Cellulose crystallites
B Beta-sheet domains
C Nitrile groups
D Lignin rings

Which bonds cross-link cysteine-rich wool keratin?

A Disulfide bonds
B Ester bonds
C Glycosidic bonds
D Ionic dye bonds

Nylon 6 is formed from which monomer?

A Adipic acid
B Caprolactam
C Ethylene glycol
D Acrylonitrile

Nylon 6,6 uses which monomer pair?

A Caprolactam and terephthalic acid
B Ethylene glycol and acrylonitrile
C Cellulose and acetic acid
D Adipic acid and hexamethylenediamine

PET polyester is formed from which reactants?

A Adipic acid and caprolactam
B Cellulose and sericin
C Terephthalic acid and ethylene glycol
D Acrylonitrile and keratin

PPTA, used for para-aramid fibres, is what polymer type?

A Aromatic polyamide
B Regenerated cellulose
C Polyester carbonate
D Inorganic silicate

Acrylic fibre polymers contain which characteristic group?

A Ester-only groups
B Cellulose rings
C Silk peptides
D Nitrile groups

Gel spinning is commonly used to make which high-performance fibre?

A Cotton lint
B UHMWPE fibre
C Raw wool
D Flax tow

PTFE fibres are valued mainly for what?

A Chemical resistance
B High moisture regain
C Natural crimp
D Easy retting

PAN-based carbon-fibre production includes which sequence?

A Retting then degumming
B Ginning then scouring
C Felting then drawing
D Stabilization then carbonization

Why is PAN precursor fibre stabilized before carbonization?

A Increase cotton maturity
B Remove wool scales
C Create a silk coating
D Prevent melting during heating

Graphitizing carbon fibre at higher temperatures can increase what?

A Moisture regain
B Modulus
C Staple length
D Lumen size

In wet spinning, what forms the solid filament?

A Cooling air only
B Cotton seed
C Mechanical twisting
D Coagulation bath

In dry spinning, what solidifies the extruded filament?

A Water retting
B Silk degumming
C Solvent evaporation
D Cellulose ginning

Melt-spun polymer filaments solidify mainly by what?

A Adding sericin
B Removing seed
C Breaking pectin
D Cooling the melt

Glass fibres are formed by drawing what material?

A Cellulose pulp
B Wool keratin
C Molten glass
D Polyester tow

Ceramic textile fibres are best classified as what?

A Inorganic fibres
B Animal proteins
C Cellulosic fibres
D Elastomeric yarns

Birefringence in a transparent fibre can indicate what?

A Molecular orientation
B Moisture regain
C Staple length
D Surface wax

X-ray diffraction is useful for assessing which fibre feature?

A Yarn twist direction
B Cocoon size
C Crystalline order
D Surface oil content

In sheath-core fibre design, which region forms the outer surface?

A Sheath polymer
B Core polymer
C Lumen wall
D Secondary wall

A side-by-side bicomponent filament can develop self-crimp through what?

A Cellulose ginning
B Silk degumming
C Uniform retting
D Differential shrinkage

What does degree of polymerization count approximately?

A Fibres per yarn
B Repeat units per chain
C Crimps per centimetre
D Grams per kilometre