Difficulty: Hard
A site’s warmest monthly mean is 29°C and coldest is 11°C. What is its annual range?
A 11°C
B 20°C
C 40°C
D 18°C
Answer: D. 18°C. Subtract the coldest monthly mean from the warmest, giving 29 minus 11 or 18°C.
A coldest monthly mean is 8°C and annual range is 17°C. What is the warmest mean?
A 9°C
B 17°C
C 25°C
D 136°C
Answer: C. 25°C. Add the annual range to the coldest monthly mean, giving 25°C.
A day’s maximum is 31°C and minimum is 15°C. What is the diurnal range?
A 16°C
B 15°C
C 23°C
D 46°C
Answer: A. 16°C. The daily range is the maximum minus minimum, or 16°C.
Temperature changes 12°C across 300 km. What is the gradient per 100 km?
A 2°C per 100 km
B 6°C per 100 km
C 12°C per 100 km
D 4°C per 100 km
Answer: D. 4°C per 100 km. Twelve degrees over 300 km equals four degrees per 100 km.
Using 6.5°C/km, how much cooler is air 2 km higher?
A About 13°C
B About 3.25°C
C About 6.5°C
D About 26°C
Answer: A. About 13°C. At the global average rate, 6.5°C per kilometre over 2 kilometres gives about 13°C.
An isotherm map adjusts a high station to sea level. Which effect is being reduced?
A Ocean-current warming
B Seasonal solar change
C Elevation-related cooling
D Latitude differences
Answer: C. Elevation-related cooling. Sea-level reduction removes the direct influence of station elevation for horizontal comparison.
A day’s high is 28°C and low is 12°C. What is the approximate daily mean?
A 20°C
B 16°C
C 18°C
D 40°C
Answer: A. 20°C. A simple daily mean estimate is the average of maximum and minimum temperatures, or 20°C.
What does a 0°C isotherm identify on a temperature map?
A Places at sea level
B Places at zero degrees
C Annual range of zero
D No temperature recorded
Answer: B. Places at zero degrees. The 0°C isotherm connects points whose mapped temperature is zero degrees Celsius.
Can two same-time isotherms cross on one temperature surface?
A Yes, at every coast
B No, values would conflict
C Only above mountains
D Only in winter
Answer: B. No, values would conflict. At one time and on one surface, a point cannot have two different temperatures, so isotherms do not cross.
Which area can have a larger day-night range despite a similar annual mean?
A Cloudy coastal region
B Deep ocean basin
C Clear, dry inland region
D Foggy island
Answer: C. Clear, dry inland region. Clear and dry conditions can produce strong daytime heating and rapid nighttime cooling.
A station at 2 km records 8°C. Using 6.5°C/km, estimate its sea-level value.
A About 8°C
B About 21°C
C About 13°C
D About 34°C
Answer: B. About 21°C. Adding the average 13°C elevation difference gives an estimated sea-level value near 21°C.
What should users remember about sea-level-adjusted temperature?
A It is a mapping estimate
B It is the station reading
C It removes all weather
D It changes station height
Answer: A. It is a mapping estimate. The adjusted value is for comparison and does not replace actual local conditions.
What does a temperature inversion do to the usual vertical pattern?
A Temperature always falls upward
B Pressure becomes constant
C Temperature rises upward
D Wind reverses globally
Answer: C. Temperature rises upward. During an inversion, temperature increases with height through the layer.
Which measurements are combined in NOAA global surface records?
A Cloud height and rainfall
B Land air and sea-surface temperatures
C Wind speed and pressure
D Ocean depth and salinity
Answer: B. Land air and sea-surface temperatures. NOAA’s global analysis combines land air temperatures with sea-surface temperature datasets.
What is the difference between spatial and temporal variation?
A Latitude versus longitude
B Across places versus over time
C Air versus ocean
D High versus low pressure
Answer: B. Across places versus over time. Spatial variation describes differences by place; temporal variation describes changes through time.
Two nearby stations share latitude but differ in their 30-year means. What is plausible?
A Latitude changed between them
B Both records are invalid
C Longitude sets solar angle
D Their local settings differ
Answer: D. Their local settings differ. Topography, elevation, currents, and water proximity can produce local climatological differences.
Why do isotherms usually represent a single reference period?
A To remove all elevation
B To compare like conditions
C To predict daily weather
D To measure rainfall
Answer: B. To compare like conditions. Using the same reference period makes mapped temperature comparisons consistent.
A site’s anomaly is +2°C, but its absolute mean is 10°C. What is its normal?
A 8°C
B 10°C
C 12°C
D 20°C
Answer: A. 8°C. Observed temperature equals normal plus anomaly, so 10 minus 2 gives an 8°C normal.
Which temperature characteristic is NOT given by annual mean alone?
A Average level
B Yearly mean
C Seasonal range
D Long-term average
Answer: C. Seasonal range. The same annual mean can occur with very different warm-season and cold-season extremes.
A profile is 2°C at ground and 7°C at 300 m. What layer exists?
A A standard lapse layer
B An oceanic front
C A temperature inversion
D A sea-level adjustment
Answer: C. A temperature inversion. Temperature rises upward by 5°C, which is an inversion.
What does an annual mean fail to show by itself?
A The yearly average
B The long-term mean
C The average level
D The seasonal temperature range
Answer: D. The seasonal temperature range. Different seasonal patterns can produce the same annual mean.
Which is the larger annual range, 24°C or 9°C?
A 9°C
B Both equal
C Cannot compare
D 24°C
Answer: D. 24°C. The larger difference between warmest and coldest monthly means is 24°C.
A warmest monthly mean is 27°C and annual range is 15°C. What is the coldest mean?
A 12°C
B 15°C
C 27°C
D 42°C
Answer: A. 12°C. Subtract the annual range from the warmest monthly mean, giving 12°C.
Why use one reference period across an isotherm map?
A For consistent comparison
B To erase local climates
C To forecast weather
D To remove all elevation
Answer: A. For consistent comparison. A shared reference period makes mapped temperature comparisons consistent.
Why may the seasonal temperature peak come after peak sunlight?
A Earth stops orbiting
B Latitude shifts abruptly
C Isotherms reverse sunlight
D Stored heat delays response
Answer: D. Stored heat delays response. Land and especially water continue accumulating heat after peak solar input, delaying the seasonal maximum.