Difficulty: Easy & Basic
Which ring-frame component inserts twist and winds yarn onto the cop?
A Opening roller
B Traveler
C Comber top comb
D Winding drum
Answer: B. Traveler. The traveler imparts twist and enables winding onto the cop.
Where does the spinning triangle form?
A At the rotor groove
B Front-roller delivery
C On the winding cone
D Inside the comber
Answer: B. Front-roller delivery. Fibres form a triangle near the front-roller delivery point.
Which ring-frame assembly most limits spindle speed?
A Ring and traveler
B Roving bobbin
C Drafting rollers
D Spindle brake
Answer: A. Ring and traveler. Traveler speed and ring friction constrain practical spindle speed.
What does a spindle brake do after an end break?
A Opens fibre tufts
B Stops spindle for piecing
C Measures yarn count
D Removes short fibres
Answer: B. Stops spindle for piecing. The brake stops the spindle so the broken end can be pieced.
Why place separators between neighboring ring spindles?
A Prevent loose-yarn crossing
B Reduce sliver count
C Add more twist
D Increase fibre length
Answer: A. Prevent loose-yarn crossing. Separators stop loose fibre assemblies joining yarn from an adjacent spindle after a break.
Traveler mass mainly influences what?
A Rotor diameter
B Fibre maturity
C Balloon and winding tension
D Sliver colour
Answer: C. Balloon and winding tension. Traveler mass affects ring friction, winding tension and balloon tension.
Too little traveller mass may cause what?
A Lower fibre maturity
B Shorter staple length
C More combing noil
D Large yarn balloon
Answer: D. Large yarn balloon. A light traveler can produce a larger balloon and a softer cop.
Excess traveler mass can raise which problem?
A Sliver coiling
B Rotor back doubling
C Fibre maturity
D Yarn end breaks
Answer: D. Yarn end breaks. A heavy traveler increases yarn tension and can increase end breakage.
Ring-frame spacers accommodate differences in what?
A Rotor speed
B Package colour
C Fibre-strand thickness
D Traveler alloy
Answer: C. Fibre-strand thickness. Spacers adjust the spacing between drafting rollers for strand thickness.
Which method can apply top-roller pressure?
A Rotor suction
B Electrostatic charging
C Ring-rail traverse
D Pneumatic weighting
Answer: D. Pneumatic weighting. Top-roller pressure systems include spring, pneumatic and magnetic weighting.
If the spinning triangle breaks, what may happen?
A Comber waste
B Higher Nm count
C Neighboring yarn entanglement
D Longer fibre staple
Answer: C. Neighboring yarn entanglement. An untwisted strand may catch yarn from a nearby spindle without separators.
Which moving rail helps build the ring cop?
A Navel
B Top cone
C Opening roller
D Ring rail
Answer: D. Ring rail. The ring rail traverses as layers are wound onto the cop.
In ring spinning, what is the cop?
A Yarn package on spindle
B Fibre waste from combing
C Sliver in a can
D Rotor groove insert
Answer: A. Yarn package on spindle. The cop is the yarn package formed on the ring spindle.
Which rotor component separates fibres from incoming sliver?
A Opening roller
B Comber top comb
C Cop rail
D Ring traveler
Answer: A. Opening roller. The opening roller separates fibres from the fed sliver.
Where are separated fibres collected in rotor spinning?
A Cop shoulder
B Rotor groove
C Ring groove
D Flyer arm
Answer: B. Rotor groove. Fibres are transported into the rotor groove before yarn formation.
Which rotor part guides yarn as it exits?
A Spindle brake
B Navel
C Top roller
D Comber noil
Answer: B. Navel. The navel guides yarn withdrawal from the rotor.
Back doubling in rotor spinning improves what?
A Ring friction
B Package taper
C Yarn evenness
D Fibre colour
Answer: C. Yarn evenness. Back doubling averages fibre variation and improves rotor-yarn evenness.
Rotor yarn may be weaker because it has less what?
A Fibre migration
B Package density
C Fibre maturity
D Comber noil
Answer: A. Fibre migration. Less fibre migration can reduce rotor-yarn tensile strength.
Which system forms a direct large yarn package?
A Speed frame
B Comber
C Rotor spinning
D Ring frame
Answer: C. Rotor spinning. Rotor spinning can produce a large package directly.
Air-jet spinning uses what to wrap fibres?
A Ring friction
B Comber action
C Air jets
D Water jets
Answer: C. Air jets. Air jets create wrapper fibres around the yarn core.
Vortex spinning relies on what flow?
A Carding flats
B Linear water flow
C Ring-traveler drag
D Swirling airflow
Answer: D. Swirling airflow. A swirling air flow wraps fibres around the yarn core.
Friction spinning uses what to form yarn?
A Ring traveler
B Rotating friction drums
C Top comb
D Doffer blade
Answer: B. Rotating friction drums. Friction drums help collect and twist fibres into yarn.
Electrostatic spinning first does what to fibres?
A Winds a cop
B Electrically charges fibres
C Measures twist
D Combs short fibres
Answer: B. Electrically charges fibres. Charged fibres respond to an oppositely charged twisting element.
Compact spinning condenses fibres before what?
A Twist insertion
B Sliver coiling
C Noil extraction
D Package unwinding
Answer: A. Twist insertion. Compact systems condense the strand before twist insertion.
Wrap spinning generally places what around a core?
A A woven fabric layer
B A comber-noil layer
C A rotor groove
D Staple fibre wrapper
Answer: D. Staple fibre wrapper. Wrap spinning uses staple fibres around a continuous core.