A rocket moves forward during launch mainly because
A it expels exhaust backward, producing an opposite reaction force
B air pushes its nose upward
C gravity pulls it forward
D the launch pad launches it
Answer: A. it expels exhaust backward, producing an opposite reaction force. By Newton’s third law and conservation of momentum, backward exhaust gives the rocket forward thrust.
A rocket can produce thrust in the vacuum of space because it
A pushes against the surrounding air
B carries and expels its own reaction mass
C uses Earth’s magnetic field as its only support
D must touch a planet
Answer: B. carries and expels its own reaction mass. Rocket engines carry propellant and expel exhaust, so they do not require air to push against.
The main role of a launch vehicle is to
A keep a satellite permanently powered
B measure the chemical composition of a planet
C carry a payload from Earth toward its required space trajectory or orbit
D control every satellite after deployment
Answer: C. carry a payload from Earth toward its required space trajectory or orbit. A launch vehicle accelerates and places its payload on a planned trajectory or into an intended orbit.
In a launch vehicle, the payload is the
A exhaust plume
B launch tower
C fuel tank only
D spacecraft or cargo carried for the mission
Answer: D. spacecraft or cargo carried for the mission. The payload is the satellite, spacecraft, or other cargo that the rocket is intended to deliver.
A payload fairing primarily protects the payload from
A aerodynamic loads and heating during the dense-atmosphere part of ascent
B solar eclipses in orbit
C radio waves from Earth
D microgravity after deployment
Answer: A. aerodynamic loads and heating during the dense-atmosphere part of ascent. The fairing shields the spacecraft from aerodynamic pressure, heating, and acoustic conditions during ascent through the atmosphere.
A payload fairing is usually discarded after the vehicle
A has left the Solar System
B has climbed above the densest part of the atmosphere
C has landed at its launch site
D has completed a full orbit
Answer: B. has climbed above the densest part of the atmosphere. Once atmospheric protection is no longer needed, the fairing can be jettisoned to reduce carried mass.
A multistage rocket drops an empty stage mainly to
A increase air resistance
B make the payload heavier
C avoid accelerating the mass of empty tanks and engines
D stop its engines from producing thrust
Answer: C. avoid accelerating the mass of empty tanks and engines. Discarding spent stages reduces dead mass and lets the remaining vehicle accelerate more efficiently.
A solid rocket motor stores its fuel and oxidizer
A only in separate external tanks
B inside the payload fairing
C in the surrounding atmosphere
D together in a solid propellant grain
Answer: D. together in a solid propellant grain. A solid propellant contains fuel and oxidizer in a solid mixture within the motor casing.
A liquid rocket engine commonly keeps fuel and oxidizer
A in tanks and feeds them to a combustion chamber
B mixed with atmospheric air in the payload
C inside the satellite batteries
D as one solid block in its nozzle
Answer: A. in tanks and feeds them to a combustion chamber. Liquid propellants are stored in tanks and delivered to the chamber, where they react and produce hot gas.
A rocket nozzle helps create thrust by
A cooling the payload by reflection
B accelerating exhaust gases out of the engine
C measuring the rocket’s altitude
D opening the satellite solar panels
Answer: B. accelerating exhaust gases out of the engine. The nozzle directs and accelerates exhaust flow, converting gas pressure and thermal energy into directed momentum.
A cryogenic rocket stage uses propellants that are
A always solid at room temperature
B collected from the upper atmosphere
C stored at very low temperatures
D generated by the payload after launch
Answer: C. stored at very low temperatures. Cryogenic propellants such as liquid hydrogen and liquid oxygen must be kept at very low temperatures.
Liquid oxygen in a rocket engine serves as the
A payload’s navigation computer
B coolant for the launch pad
C material for the rocket fairing
D oxidizer that supports combustion with the fuel
Answer: D. oxidizer that supports combustion with the fuel. Liquid oxygen is an oxidizer; it enables the fuel to burn where atmospheric oxygen is unavailable.
A turbopump in a liquid rocket engine is used to
A move propellants into the combustion chamber at high pressure
B open the payload fairing after orbit insertion
C track stars for navigation from Earth
D slow the rocket by increasing drag
Answer: A. move propellants into the combustion chamber at high pressure. Turbopumps deliver fuel and oxidizer to the combustion chamber at the required high flow and pressure.
The first stage of a launch vehicle generally provides
A the satellite’s long-term communication service
B much of the initial thrust during liftoff and early ascent
C all orbit corrections years after launch
D the payload’s scientific measurements
Answer: B. much of the initial thrust during liftoff and early ascent. The first stage works from liftoff and is designed for the early, dense-atmosphere portion of ascent.
A strap-on booster is attached to the main launch vehicle to
A serve as a permanent satellite antenna
B measure ocean temperature
C add thrust during part of the ascent
D replace the payload fairing in orbit
Answer: C. add thrust during part of the ascent. Strap-on boosters supplement the vehicle’s thrust and are jettisoned after their propellant is used.
The upper stage of a launch vehicle often helps to
A protect the rocket from rain after landing
B manufacture a satellite during flight
C return the launch pad to Earth
D complete ascent and place payloads on their target trajectory or orbit
Answer: D. complete ascent and place payloads on their target trajectory or orbit. Upper stages operate later in flight, where they can provide the velocity changes needed for payload deployment.
A rocket’s guidance system primarily determines
A how to steer toward the planned flight path
B the chemical formula of the payload
C the weather at every point on Earth
D the satellite’s scientific discoveries
Answer: A. how to steer toward the planned flight path. Guidance estimates the vehicle state and determines steering commands to follow the planned trajectory.
An inertial navigation system estimates a rocket’s motion using
A ocean buoys and tide gauges
B accelerometers and gyroscopes
C visible road markings
D radioactivity in the fairing
Answer: B. accelerometers and gyroscopes. Inertial systems use accelerometers and gyroscopes to estimate acceleration, orientation, and motion without needing external visual references.
A rocket follows a curved flight path after liftoff partly to
A keep its entire path inside the atmosphere
B avoid using gravity
C build horizontal speed needed for orbit
D point its payload toward the launch tower
Answer: C. build horizontal speed needed for orbit. Orbital insertion requires substantial horizontal velocity, so the trajectory gradually turns from vertical ascent.
A satellite in orbit remains in orbit when its forward motion and gravity
A cancel all gravity at its altitude
B make it stationary in space
C are replaced by atmospheric lift
D combine to produce continuous free fall around Earth
Answer: D. combine to produce continuous free fall around Earth. An orbit is continuous free fall: gravity bends the satellite’s path while its forward velocity carries it around Earth.
Escape velocity describes the minimum speed needed, in an idealized case, to
A leave a body’s gravitational field without further propulsion
B remain exactly above one point on Earth
C enter any low Earth orbit
D overcome atmospheric drag at sea level only
Answer: A. leave a body’s gravitational field without further propulsion. Escape velocity is the threshold speed for escaping a body’s gravitational attraction without additional propulsion, ignoring losses.
Orbital speed and escape speed differ because a satellite in orbit
A has no velocity
B continues to fall around the central body instead of escaping its gravity
C must always travel faster than escape speed
D is held up by air
Answer: B. continues to fall around the central body instead of escaping its gravity. An orbiting spacecraft has enough sideways speed to keep missing the body as it falls, but it remains gravitationally bound.
The thrust-to-weight ratio at liftoff must generally be
A exactly zero
B less than one for upward acceleration
C greater than one for the rocket to accelerate upward
D unrelated to the vehicle’s weight
Answer: C. greater than one for the rocket to accelerate upward. At liftoff, thrust must exceed weight to produce a net upward acceleration, although the ratio changes during flight.
Launch timing can be important because it affects
A the colour of the rocket exhaust only
B the payload’s mass after fairing separation
C whether gravity exists
D the geometry and energy needed to reach the intended orbit or destination
Answer: D. the geometry and energy needed to reach the intended orbit or destination. A launch window can depend on orbital geometry, target position, lighting, and the energy required for the planned trajectory.
According to ISRO, the Vikram Sarabhai Space Centre is responsible for
A design and development of launch vehicles
B operating every satellite from orbit
C building all launch pads worldwide
D monitoring all solar flares
Answer: A. design and development of launch vehicles. ISRO identifies VSSC in Thiruvananthapuram as the centre responsible for launch-vehicle design and development.