A is placed into orbit around a celestial body by human activity
B forms naturally around a planet
C is always a crewed spacecraft
D must travel beyond the Solar System
Answer: A. is placed into orbit around a celestial body by human activity. Artificial satellites are human-made objects placed into orbit around Earth or another celestial body.
A satellite in a stable Earth orbit is primarily kept on its curved path by
A the air pushing upward
B Earth’s gravity
C continuous contact with Earth
D the planet’s magnetic field alone
Answer: B. Earth’s gravity. Earth’s gravitational attraction continually bends the satellite’s forward motion into an orbit.
Astronauts and satellites in orbit appear weightless mainly because they
A experience no gravity at all
B are beyond Earth’s gravitational influence
C are in continuous free fall together around Earth
D are held up by the atmosphere
Answer: C. are in continuous free fall together around Earth. Gravity is still strong in low Earth orbit; the spacecraft and its occupants are falling together, creating apparent weightlessness.
Low Earth orbit is useful for many Earth-observation missions because it
A places a satellite permanently over one equatorial point
B eliminates orbital motion
C lies beyond the Moon
D keeps a satellite relatively close to the surface
Answer: D. keeps a satellite relatively close to the surface. A lower orbit can provide close views of Earth, which is useful for imaging and many scientific missions.
A geostationary satellite appears nearly fixed over one longitude because it
A orbits above the equator in the same direction and period as Earth’s rotation
B orbits over a pole once each day
C does not move in space
D is attached to a tower
Answer: A. orbits above the equator in the same direction and period as Earth’s rotation. A circular equatorial orbit with a period matching Earth’s rotation lets the satellite remain over nearly the same ground location.
A geosynchronous orbit differs from a geostationary orbit because a geosynchronous satellite
A must remain over the equator at every moment
B may appear to move north-south or east-west in the sky
C has no orbital period
D cannot carry communications equipment
Answer: B. may appear to move north-south or east-west in the sky. Geostationary orbit is a special circular, equatorial geosynchronous orbit; other geosynchronous paths can appear to move relative to the ground.
A polar-orbiting satellite passes over or near
A only the equator
B a single fixed point on the equator
C Earth’s poles on successive orbits
D the Moon’s north pole
Answer: C. Earth’s poles on successive orbits. A polar orbit has a high inclination and takes the spacecraft over or near both polar regions.
A sun-synchronous satellite is designed so that it
A stays permanently in Earth’s shadow
B has no orbital inclination
C orbits the Sun once every 24 hours
D crosses a given region at roughly the same local solar time
Answer: D. crosses a given region at roughly the same local solar time. A sun-synchronous orbit precesses so the spacecraft observes locations at nearly consistent local solar times.
The inclination of an Earth satellite orbit is the angle between its orbital plane and
A Earth’s equatorial plane
B the Moon’s orbit and Earth’s surface
C the satellite antenna and its solar panels
D the horizon at launch only
Answer: A. Earth’s equatorial plane. Orbital inclination describes the tilt of an orbit relative to a reference plane, commonly Earth’s equator.
The eccentricity of an orbit describes how
A bright its satellite appears
B much its shape differs from a circle
C quickly its radio antenna rotates
D many instruments it carries
Answer: B. much its shape differs from a circle. Eccentricity measures orbital shape: zero for a circle and increasingly large values for more elongated ellipses.
For an elliptical Earth orbit, perigee is the point
A farthest from Earth
B where the orbit crosses the equator
C closest to Earth
D where the satellite enters sunlight
Answer: C. closest to Earth. Perigee is the point of an Earth orbit nearest Earth; apogee is the farthest point.
A satellite’s payload is the set of equipment that
A provides the launch pad’s electrical supply
B forms the launch vehicle’s first stage
C keeps the spacecraft attached to Earth
D performs the mission, such as imaging instruments or communications transponders
Answer: D. performs the mission, such as imaging instruments or communications transponders. Payload instruments and systems carry out the satellite’s intended scientific, communication, navigation, or observation task.
A communications satellite transponder typically
A receives, processes or converts, and retransmits radio signals
B measures the satellite’s mass with a scale
C produces oxygen for Earth’s atmosphere
D changes the satellite’s orbital plane without propulsion
Answer: A. receives, processes or converts, and retransmits radio signals. A transponder receives an uplink signal and retransmits it, often at a different frequency and with amplification.
A satellite antenna is designed mainly to
A convert sunlight directly into fuel
B send or receive electromagnetic signals
C measure orbital altitude by touch
D protect the payload from launch vibration
Answer: B. send or receive electromagnetic signals. Antennas transmit or receive radio-frequency signals used for communication, tracking, or data return.
Solar arrays on many satellites provide electrical power by
A burning liquid oxygen
B collecting sound from space
C converting sunlight into electricity
D using Earth’s winds
Answer: C. converting sunlight into electricity. Photovoltaic solar cells convert sunlight into electrical energy for spacecraft systems and instruments.
A satellite battery is especially useful when the spacecraft
A is being launched from the ground only
B has no electrical equipment
C is below the ocean surface
D passes through Earth’s shadow or needs stored power
Answer: D. passes through Earth’s shadow or needs stored power. Batteries store energy generated by solar arrays and supply it during eclipses or periods of high power demand.
Telemetry, tracking, and command systems help mission teams
A monitor a spacecraft and send it operational commands
B change the chemical composition of its payload
C create the satellite’s orbit without a launch vehicle
D remove every object from orbit
Answer: A. monitor a spacecraft and send it operational commands. TT&C links return spacecraft health and tracking data and allow authorized commands to be sent.
Earth-observation satellites can help monitor
A only the inside of Earth’s core
B land cover, oceans, clouds, and environmental changes
C the sound of distant stars without instruments
D the weight of mountains directly
Answer: B. land cover, oceans, clouds, and environmental changes. Remote-sensing instruments measure reflected or emitted energy to study Earth’s land, water, atmosphere, and changes over time.
A weather satellite in geostationary orbit is especially useful for
A detailed imaging of every part of the poles at once
B mapping the ocean floor through solid rock
C frequent observations of the same broad region
D measuring Earth’s rotation by touch
Answer: C. frequent observations of the same broad region. Its fixed view over one region supports frequent tracking of clouds and rapidly changing weather systems.
A navigation satellite constellation helps users determine location by transmitting
A visible road maps from the satellite body
B mechanical measuring tapes
C sound waves through the atmosphere
D precisely timed radio signals
Answer: D. precisely timed radio signals. Receivers compare signal travel times from multiple satellites to estimate position and time.
Synthetic aperture radar is useful for Earth observation because radar imaging can
A collect data through clouds and in darkness
B work only in clear daylight
C measure colour using visible light alone
D stop the satellite’s orbital motion
Answer: A. collect data through clouds and in darkness. Radar instruments actively transmit microwaves and can observe through clouds and at night.
Orbital debris is a concern because fragments can
A stop all satellites from receiving sunlight
B collide with spacecraft at high relative speeds
C turn into natural moons immediately
D make Earth’s gravity disappear
Answer: B. collide with spacecraft at high relative speeds. Even small debris can damage spacecraft because orbital collision speeds can be very high.
A satellite operator may plan a controlled end-of-mission disposal to
A increase radio interference on purpose
B move the satellite into a lower working orbit forever
C reduce the chance that the spacecraft remains hazardous debris
D disable every nearby satellite
Answer: C. reduce the chance that the spacecraft remains hazardous debris. End-of-life plans can include reentry or moving a spacecraft to a disposal orbit to reduce long-term collision risks.
A CubeSat is best described as
A a satellite that can orbit only the Moon
B a ground-based telescope
C a rocket engine made from cubes
D a small satellite built using standardized unit sizes
Answer: D. a small satellite built using standardized unit sizes. CubeSats are small satellites based on standardized cubic units, often used in education, research, and technology demonstrations.
Changing a satellite’s orbit usually requires
A a controlled change in velocity using propulsion or another force
B turning off its radio receiver
C changing its paint colour
D opening its antenna
Answer: A. a controlled change in velocity using propulsion or another force. Orbital maneuvers alter the spacecraft’s velocity vector, changing its orbit’s size, shape, or orientation.