Difficulty: Soil texture, structure and physical properties
A field sample feels gritty, smooth and sticky in different proportions. Which quantities determine its soil texture class?
A The number of earthworms in a square metre
B The proportions of sand, silt and clay
C The depth of the water table only
D The age of the parent rock alone
Answer: B. The proportions of sand, silt and clay. Texture is determined by the relative proportions of the mineral particle-size fractions: sand, silt and clay.
A sandy soil often dries soon after rain because it generally has:
A A permanently impermeable surface
B More clay than a clay soil
C Only microscopic pores and no air spaces
D Large particles and relatively rapid drainage
Answer: D. Large particles and relatively rapid drainage. Coarse sand particles create relatively large pores that allow water to drain quickly, so sandy soil often has low water retention.
Why may clay-rich soil hold much water yet still supply less plant-available water than a well-structured loam?
A Clay has no mineral nutrients
B Clay always drains instantly
C Clay contains no pore spaces
D Some water is held very tightly on fine particles and is hard for roots to extract
Answer: D. Some water is held very tightly on fine particles and is hard for roots to extract. Clay can retain much water, but a portion is held at tensions too high for roots; available water depends on both field capacity and wilting point.
Which description best fits loam as a textural class?
A It consists almost entirely of gravel
B It is a surface layer of fresh leaf litter
C It is pure clay with no silt or sand
D It has a useful balance of sand, silt and clay fractions
Answer: D. It has a useful balance of sand, silt and clay fractions. Loam contains a relatively balanced mix of sand, silt and clay and often combines useful drainage with water and nutrient retention.
Compared with coarse sand, silt particles are generally:
A Too large to be carried by water
B Made only of organic matter
C Larger and always more angular
D Finer and smoother to the touch
Answer: D. Finer and smoother to the touch. Silt particles are finer than sand and often feel smooth or floury when dry.
In soil science, “structure” refers mainly to:
A The proportion of sand, silt and clay
B The total amount of rainfall over a year
C The depth of bedrock below a continent
D The way soil particles are arranged into aggregates or peds
Answer: D. The way soil particles are arranged into aggregates or peds. Soil structure describes how particles are grouped into aggregates and the arrangement of pores between them.
Which type of structure is often associated with a biologically active, organic-rich topsoil?
A Granular or crumb aggregates
B Massive structure with no cracks
C A continuous sheet of hard bedrock
D Single-grain structure of loose sand
Answer: A. Granular or crumb aggregates. Granular or crumb structure is common in well-aerated surface soil with organic matter and biological activity.
A compact layer has thin, horizontally arranged soil plates. Which structural form is being described?
A Granular
B Blocky
C Platy
D Prismatic
Answer: C. Platy. Platy structure consists of thin plates arranged roughly horizontally and can restrict vertical water movement and root growth.
Bulk density is calculated as the:
A Mass of clay divided by the mass of sand
B Depth of soil divided by its pH
C Mass of oven-dry soil divided by its total bulk volume
D Volume of water divided by rainfall duration
Answer: C. Mass of oven-dry soil divided by its total bulk volume. Bulk density is the dry mass of soil per unit bulk volume, including the pore spaces.
A high bulk density in a cultivated field most often suggests:
A Very high organic matter in every horizon
B Compaction that may restrict roots and water movement
C A rapid increase in soil porosity
D A low concentration of mineral particles
Answer: B. Compaction that may restrict roots and water movement. Compaction packs particles more tightly, increasing bulk density and potentially limiting root penetration, aeration and infiltration.
If soil particles are packed more tightly while other factors remain similar, what usually happens to total pore space?
A It always doubles
B It decreases
C It turns into humus
D It becomes unlimited
Answer: B. It decreases. Compaction reduces the volume of pore spaces between particles, especially larger pores.
Which pore class usually allows rapid drainage and air exchange after rain?
A Closed pores inside bedrock
B Macropores
C Capillary films only
D Micropores
Answer: B. Macropores. Larger macropores conduct air and water rapidly and commonly drain under gravity.
Fine pores are especially important because they can:
A Stop all nutrient movement
B Convert mineral soil into organic soil
C Prevent roots from absorbing any water
D Retain water against gravity by capillary forces
Answer: D. Retain water against gravity by capillary forces. Small pores hold water more strongly through capillary forces than large pores do.
A crust forms on the soil surface and water ponds during light rain. Which property has most directly declined?
A Surface infiltration capacity
B The soil’s latitude
C The percentage of bedrock
D The age of the parent material
Answer: A. Surface infiltration capacity. Surface crusting can seal pores and reduce the rate at which water enters the soil.
How does infiltration differ from permeability?
A Infiltration is water entering at the surface; permeability describes flow through soil material
B Both mean the same thing in every context
C Infiltration measures wind entry; permeability measures evaporation
D Infiltration measures soil colour; permeability measures soil pH
Answer: A. Infiltration is water entering at the surface; permeability describes flow through soil material. Infiltration concerns entry of water through the soil surface, while permeability describes how readily water moves through the soil.
Water remaining in soil after most free gravitational drainage has occurred is near:
A Field capacity
B Saturation point
C Hygroscopic coefficient
D Permanent wilting point
Answer: A. Field capacity. Field capacity is the water content remaining after excess gravitational water has drained from a well-drained soil.
Which soil water is generally most available for plant uptake?
A Gravitational water rapidly draining through macropores
B A thin hygroscopic film held too tightly on particles
C Capillary water held in pores between field capacity and wilting point
D Water chemically bound within mineral crystals
Answer: C. Capillary water held in pores between field capacity and wilting point. Plants mainly draw on capillary water held at tensions that roots can overcome, within the available-water range.
Which comparison between texture and structure is correct?
A Texture describes aggregates; structure describes mineral particle sizes
B Texture is the soil’s age; structure is its parent rock
C Texture is particle-size proportions; structure is particle arrangement
D They are synonyms for soil colour
Answer: C. Texture is particle-size proportions; structure is particle arrangement. Texture concerns the relative sizes and proportions of mineral particles; structure concerns how those particles form aggregates.
How can organic matter improve the physical condition of many mineral soils?
A It converts sand directly into clay
B It removes all pore spaces
C It can bind particles into stable aggregates and improve pore continuity
D It prevents aggregate formation
Answer: C. It can bind particles into stable aggregates and improve pore continuity. Organic matter and biological activity can help form stable aggregates, supporting infiltration, aeration and root growth.
Why can humus and some clay minerals help soil retain nutrient cations?
A They cause all nutrients to evaporate
B They contain no charged surfaces
C Their surfaces can carry negative charges that attract positive ions
D They permanently lock every element in bedrock
Answer: C. Their surfaces can carry negative charges that attract positive ions. Humus and many clay minerals have negatively charged sites that adsorb positively charged nutrient ions, contributing to cation-exchange capacity.
A dark surface soil is observed in a grassland. Which inference is reasonable but should not be treated as certain from colour alone?
A It must be saline
B It may contain appreciable organic matter
C It has exactly neutral pH
D It contains no mineral particles
Answer: B. It may contain appreciable organic matter. Organic matter often darkens surface soil, but colour alone cannot establish fertility, salinity or pH.
On the pH scale, a soil with pH 7 is described as:
A Neutral
B Saline by definition
C Strongly alkaline
D Strongly acidic
Answer: A. Neutral. A pH of 7 is neutral on the standard pH scale; values below 7 are acidic and values above 7 are alkaline.
In a strongly acid soil, which nutrient-related problem may occur depending on local minerals and crops?
A Some nutrient deficiencies or metal toxicities can limit plant growth
B The soil loses all microbial life immediately
C All metals become unavailable without exception
D Soil texture changes to sand overnight
Answer: A. Some nutrient deficiencies or metal toxicities can limit plant growth. Soil acidity can reduce availability of some nutrients and increase the solubility of potentially toxic elements such as aluminium in susceptible soils.
A gardener wants a quick field estimate of texture without laboratory equipment. Which method is commonly used?
A Count pebbles over the whole farm
B Moisten a sample and assess its feel and ability to form a ribbon
C Measure the colour under a lamp only
D Weigh the soil after burning it
Answer: B. Moisten a sample and assess its feel and ability to form a ribbon. The hand-texturing method uses feel and ribbon formation in a moistened sample to estimate clay content and textural class.
Why is soil texture usually considered a relatively stable property compared with soil structure?
A Texture changes slowly unless particles are added, removed or mixed; structure responds more readily to roots, tillage and wetting
B Texture changes each time it rains
C Texture is controlled only by daily temperature
D Structure is fixed permanently by the bedrock
Answer: A. Texture changes slowly unless particles are added, removed or mixed; structure responds more readily to roots, tillage and wetting. Texture reflects particle-size proportions and changes substantially mainly through deposition, erosion or mixing; structure can change more readily with biological activity and management.