Difficulty: Mixed
What should be checked before choosing a paint?
A Can colour alone
B Surface and intended location
C Package shape
D Room number
Answer: B. Surface and intended location. Select a coating suited to the substrate and interior or exterior conditions.
What does primer commonly do?
A Repair structural damage
B Prepare a surface for paint
C Stop every water leak
D Replace ventilation
Answer: B. Prepare a surface for paint. Primer can improve adhesion or coverage when the surface or product requires it.
Which surface is ready for painting?
A Wet peeling surface
B Greasy dusty wall
C Loose flaking coating
D Clean, dry, sound surface
Answer: D. Clean, dry, sound surface. Paint adheres best to a clean, dry, stable surface prepared as directed.
Why should an active leak be fixed before painting?
A Paint repairs plumbing
B Water adds primer
C Leaks improve adhesion
D Moisture can damage the finish
Answer: D. Moisture can damage the finish. Correct the moisture source before repainting, or the coating may fail again.
What should be done with visible mould before painting?
A Paint over it wet
B Address moisture and growth
C Seal it inside
D Ignore the leak
Answer: B. Address moisture and growth. Do not paint over wet or visibly mouldy materials; address the moisture source first.
How can paint colour be previewed in a room?
A Rely only on a screen
B Test a sample in place
C Choose by name alone
D Paint every wall first
Answer: B. Test a sample in place. Sample paint in the actual room because light and surroundings affect appearance.
Why should paint be stirred as directed?
A Change its colour code
B Make it dry instantly
C Redistribute settled components
D Remove all fumes
Answer: C. Redistribute settled components. Stirring as directed can redistribute settled pigments and ingredients.
What should be followed when applying paint?
A A random online slogan
B The can’s colour
C A neighbour’s guess
D Product label directions
Answer: D. Product label directions. Follow the label for preparation, application, drying, and cleanup.
How can a roller reduce splatter?
A Overfill it heavily
B Load it evenly
C Spin it near people
D Use it while dripping
Answer: B. Load it evenly. Evenly loading a roller helps reduce drips and splatter.
Which tool is suited to painting corners?
A Pipe wrench
B Claw hammer
C Stud finder
D Angled brush
Answer: D. Angled brush. An angled paintbrush can help reach corners and edges.
Why use painter’s tape around trim?
A Increase paint adhesion everywhere
B Protect adjoining surfaces
C Measure the wall
D Replace surface preparation
Answer: B. Protect adjoining surfaces. Painter’s tape can help mask adjacent surfaces during painting.
When should masking tape be removed?
A Follow the product guidance
B Leave it for months
C Pull during wet application
D Use it as a ladder
Answer: A. Follow the product guidance. Follow the tape and paint instructions for removal timing.
What can cause paint to peel soon after application?
A A clean dry wall
B Proper primer
C Correct drying time
D Damp or dirty surface
Answer: D. Damp or dirty surface. Moisture, dirt, or unstable old coatings can undermine adhesion.
Why allow each coat to dry as directed?
A Make paint darker
B Support proper curing and adhesion
C Remove need for primer
D Stop all odours
Answer: B. Support proper curing and adhesion. Respect drying and recoating times on the product label.
What should be used for cleaning water-based paint tools?
A Gasoline by default
B An unknown solvent
C Cooking oil
D Follow label cleanup directions
Answer: D. Follow label cleanup directions. Water-based coatings often clean up with water, but follow the specific label.
How should solvent-based paint waste be handled?
A Pour it down a drain
B Mix into soil
C Leave the can open
D Follow label and local rules
Answer: D. Follow label and local rules. Follow the product label and local hazardous-waste rules for solvent-based paint.
Why ventilate while painting indoors?
A Make walls dry instantly
B Reduce exposure to vapours
C Replace eye protection
D Increase paint thickness
Answer: B. Reduce exposure to vapours. Ventilation can reduce exposure to vapours; use products as labelled.
Which action is unsafe near flammable paint vapours?
A Read product warnings
B Ventilate as directed
C Store paint closed
D Use an open flame
Answer: D. Use an open flame. Keep ignition sources away from flammable vapours and follow label precautions.
What should be done before mixing different paint products?
A Combine them freely
B Check compatibility and label
C Add household cleaner
D Ignore warnings
Answer: B. Check compatibility and label. Do not mix products unless the manufacturer says they are compatible.
How can older painted surfaces create a hazard?
A They always contain asbestos
B They may contain lead
C They cannot be repainted
D They have no coating
Answer: B. They may contain lead. Older paint may contain lead; assess hazards before disturbing it.
What is a safer step before sanding old paint?
A Dry sand indoors
B Seek testing or expert guidance
C Burn it off
D Let children scrape
Answer: B. Seek testing or expert guidance. Testing or qualified guidance can help manage hazards from older coatings.
Which protective item can protect eyes from paint splashes?
A Safety glasses
B Open sandals
C Loose scarf
D Wool cap
Answer: A. Safety glasses. Safety glasses protect eyes from splashes and sanding debris.
How should a respirator be selected for painting?
A Use any cloth mask
B Wear it loose
C Skip fit checks
D Match it to the hazard
Answer: D. Match it to the hazard. Respiratory protection must match the product hazard and fit properly.
Why avoid spraying paint toward other people?
A It improves coverage
B It dries the surface
C It reduces fumes
D Mist reaches eyes and lungs
Answer: D. Mist reaches eyes and lungs. Paint mist can travel beyond the target surface and should be controlled.
What should be done before climbing to paint a ceiling?
A Stand on a chair
B Inspect and place ladder safely
C Place ladder on boxes
D Overreach from the top
Answer: B. Inspect and place ladder safely. Inspect the ladder and place it on stable, level footing.
How can paint be applied more evenly?
A Leave random bare patches
B Add water without directions
C Overload the brush
D Use steady overlapping strokes
Answer: D. Use steady overlapping strokes. Steady overlapping strokes can improve coverage when using the proper technique.
Why is exterior paint different from interior paint?
A It always contains no chemicals
B It is only decorative
C It needs no preparation
D It is formulated for exposure
Answer: D. It is formulated for exposure. Exterior coatings are formulated for weather exposure and may not suit indoor use.
What matters before painting outdoors?
A The tool brand
B Weather and surface dryness
C The room’s furniture
D The wall’s colour name
Answer: B. Weather and surface dryness. Check the product’s temperature, humidity, and weather requirements before exterior painting.
Which condition can cause a fresh exterior coating to fail?
A Rain before it cures
B A clean dry surface
C Correct recoat time
D Suitable temperature
Answer: A. Rain before it cures. Rain before the coating has dried or cured can damage the finish.
How should paint cans be stored after use?
A Open in direct sun
B Beside a flame
C Closed and away from heat
D Within children’s reach
Answer: C. Closed and away from heat. Close containers securely and store them according to the label, away from children and heat.
What can help prevent skin contact with paint?
A Wear suitable gloves
B Use bare hands
C Wipe with solvent
D Touch wet coatings
Answer: A. Wear suitable gloves. Wear gloves suitable for the product and follow label precautions.
What should happen to paint spills?
A Wash them into drains
B Leave them on floors
C Clean them using label guidance
D Cover with paper
Answer: C. Clean them using label guidance. Clean spills safely following product directions and local disposal rules.
Why should paint not be poured into storm drains?
A It can pollute waterways
B It improves drainage
C It adds clean water
D It changes road colour
Answer: A. It can pollute waterways. Paint can contaminate waterways and should be disposed of properly.
Which finish often reflects more light?
A Flat finish
B Matte finish
C Gloss finish
D Chalk finish
Answer: C. Gloss finish. Gloss finishes generally reflect more light than flatter finishes.
What should be considered when painting a high-touch surface?
A Durability and cleanability
B Only the colour name
C Room ceiling height
D The brush handle
Answer: A. Durability and cleanability. Choose a finish suited to the surface’s wear and cleaning needs.
What may improve paint adhesion on glossy surfaces?
A Painting over grease
B Skipping instructions
C Suitable surface preparation
D Applying onto water
Answer: C. Suitable surface preparation. Glossy surfaces may need preparation such as cleaning and suitable abrasion, following product directions.
How can drips be reduced when painting trim?
A Use controlled paint amounts
B Load the brush heavily
C Paint toward the floor
D Skip a drop cloth
Answer: A. Use controlled paint amounts. Controlled amounts and steady technique help prevent drips.
Why use a drop cloth?
A Increase paint drying time
B Change wall texture
C Protect floors and furnishings
D Replace masking
Answer: C. Protect floors and furnishings. Drop cloths help protect floors and nearby items from drips and splashes.
What should be checked before repainting a metal surface?
A Suitable primer and coating
B Only the paint colour
C The room’s furniture
D A wooden brush
Answer: A. Suitable primer and coating. Metal may require a compatible primer and coating system to resist corrosion and adhere.
Which action helps paint a wooden surface evenly?
A Paint over wet wood
B Use a dirty brush
C Follow grain and product directions
D Skip surface prep
Answer: C. Follow grain and product directions. Prepare wood and apply paint according to product directions and surface condition.
What is a safe response if paint causes dizziness?
A Leave for fresh air
B Keep painting faster
C Close the windows
D Mix another product
Answer: A. Leave for fresh air. Stop exposure and move to fresh air; seek medical help if symptoms persist or are severe.
Why keep children away from wet paint?
A Paint dries by itself
B Children change the colour
C Avoid exposure and contact
D It improves adhesion
Answer: C. Avoid exposure and contact. Keep children away from wet coatings and stored chemicals.
What can a test patch reveal?
A Colour and coverage
B Electrical voltage
C Wall framing
D Water pressure
Answer: A. Colour and coverage. A test patch shows colour and coverage under actual conditions.
How can paint quantity be estimated?
A Guess from can colour
B Use room number
C Measure area and check coverage
D Count windows only
Answer: C. Measure area and check coverage. Use surface area and the product’s stated coverage to estimate quantity.
What should be done with an empty paint can?
A Follow local disposal rules
B Burn it indoors
C Use it for drinking water
D Leave it in a drain
Answer: A. Follow local disposal rules. Dispose of containers according to product instructions and local rules.
Which surface should not be painted until dry?
A Dry cured wood
B Clean metal
C Fresh wall patch
D Prepared trim
Answer: C. Fresh wall patch. Allow fresh patching materials to dry as directed before applying coatings.
Why can coats look different under room lighting?
A Light changes colour appearance
B Paint labels change hue
C Walls change pigment
D Brushes alter colour
Answer: A. Light changes colour appearance. Lighting and surrounding colours influence how a coating appears.
What should be done if paint coverage is poor?
A Add random chemicals
B Paint over wet areas
C Check surface and recoat guidance
D Ignore the label
Answer: C. Check surface and recoat guidance. Check preparation, product coverage, and recoat directions before adding another coat.
Which principle supports a safe painting project?
A Prepare, ventilate, follow labels
B Mix products freely
C Ignore weather
D Skip protective equipment
Answer: A. Prepare, ventilate, follow labels. Preparation, ventilation, product directions, and suitable protection support safer painting.
What should be checked before opening a paint can?
A Only the brand colour
B The room temperature
C Label, seal, and condition
D The brush handle
Answer: C. Label, seal, and condition. Check the product label and container condition before use.