Difficulty: Mixed
What should be checked before repairing furniture?
A Paint colour only
B Cause and extent of damage
C Room lighting
D Furniture brand
Answer: B. Cause and extent of damage. Assess why the furniture failed and how much damage exists before choosing a repair.
Which fastener is used to attach a hinge?
A Screw
B Paint scraper
C Chisel
D Sandpaper
Answer: A. Screw. Screws commonly secure hinges to wood or compatible substrates.
Why should a screw length suit the furniture part?
A Change the wood colour
B Avoid puncturing through
C Make it rustproof
D Increase glue drying
Answer: B. Avoid puncturing through. An unsuitable screw may protrude through the opposite surface or fail to hold.
What can help prevent wood splitting near an edge?
A Use a larger hammer
B Soak the wood
C Remove all screws
D Drill a suitable pilot hole
Answer: D. Drill a suitable pilot hole. A suitable pilot hole can reduce splitting when installing screws in wood.
Which product can bond a loose wooden joint?
A Glass cleaner
B Wood adhesive
C Wall primer
D Cooking oil
Answer: B. Wood adhesive. Wood adhesive is designed to bond compatible wooden surfaces.
What can hold a glued joint while it cures?
A Paint roller
B Clamp
C Tape measure
D Stud finder
Answer: B. Clamp. A clamp can hold aligned parts while adhesive cures.
What should guide adhesive curing time?
A Furniture colour
B Product instructions
C Room number
D A random estimate
Answer: B. Product instructions. Follow the adhesive label for clamping and curing times.
When should repaired furniture be used again?
A While glue is wet
B Before checking stability
C As soon as clamped
D After the repair cures fully
Answer: D. After the repair cures fully. Allow the repair to cure as directed before loading or using the furniture.
Why is surface preparation important before gluing?
A Increase paint colour
B Make wood heavier
C Replace clamps
D Remove dirt and loose finish
Answer: D. Remove dirt and loose finish. Clean, sound contact surfaces help an adhesive bond as intended.
What can a wood filler usually repair?
A Broken load-bearing joints
B A cracked chair leg
C A loose staircase
D Small surface defects
Answer: D. Small surface defects. Filler is generally for surface defects, not structural repairs.
Which damage may need professional furniture repair?
A Loose decorative knob
B Small paint scratch
C Cracked load-bearing frame
D Minor drawer squeak
Answer: C. Cracked load-bearing frame. Damage to load-bearing frames or safety-critical parts may need a qualified repairer.
How should a wobbly chair be treated before use?
A Use it carefully anyway
B Add a cushion
C Place it on a rug
D Inspect and repair its joints
Answer: D. Inspect and repair its joints. Inspect the joints and do not use an unstable chair until it is repaired.
What can cause a drawer to stick?
A Wall paint
B Misaligned slides or debris
C Room temperature only
D A loose cushion
Answer: B. Misaligned slides or debris. Misaligned slides, dirt, or damage can cause a drawer to stick.
Which tool can tighten a loose cabinet screw?
A Pipe wrench
B Handsaw
C Correct screwdriver
D Paint roller
Answer: C. Correct screwdriver. Use a screwdriver that fits the screw head.
Why avoid using the wrong screwdriver tip?
A It changes screw length
B It strengthens the joint
C It prevents splitting
D It can damage the screw
Answer: D. It can damage the screw. A poorly fitting driver can slip and damage the fastener or workpiece.
How can loose hinge screws be addressed?
A Add paint over them
B Force larger screws blindly
C Remove the door
D Use compatible replacement fixings
Answer: D. Use compatible replacement fixings. Use fixings suitable for the material and existing hole; assess damage before repair.
What should be checked before sanding old furniture paint?
A The upholstery colour
B Possible lead hazards
C The room’s furniture
D The chair’s age only
Answer: B. Possible lead hazards. Older coatings may contain lead; seek testing or qualified guidance before disturbing them.
Which item helps protect eyes during sanding?
A Open sandals
B Loose scarf
C Cotton cap
D Safety glasses
Answer: D. Safety glasses. Safety glasses help protect eyes from sanding dust and small particles.
How can sanding dust be managed?
A Blow it around
B Use suitable dust collection
C Dry sweep into air
D Sand near children
Answer: B. Use suitable dust collection. Use suitable dust controls and keep others away from sanding debris.
What should happen to a broken glass panel?
A Tape it loosely
B Keep clear; get professional repair
C Use the furniture anyway
D Brush shards by hand
Answer: B. Keep clear; get professional repair. Keep people away from broken glass and use suitable professional repair if needed.
Why should furniture be anchored to a wall?
A Increase shelf depth
B Make paint dry faster
C Stop drawer squeaks
D Reduce tip-over risk
Answer: D. Reduce tip-over risk. Anchoring tall furniture helps reduce tip-over hazards.
Where should heavier items be stored on a bookcase?
A Top edge
B Lower shelves
C Shelf front
D Above children
Answer: B. Lower shelves. Heavier items on lower shelves reduce the chance of tipping.
What can tempt a child to climb furniture?
A Closed drawers
B Toys stored on top
C Low heavy items
D Wall anchors
Answer: B. Toys stored on top. Toys or appealing objects placed high can encourage climbing.
How should an anti-tip kit be installed?
A Use any spare cord
B Attach to trim only
C Skip wall checks
D Follow manufacturer directions
Answer: D. Follow manufacturer directions. Follow the kit and furniture instructions for secure anchoring.
What should be considered when selecting a furniture repair screw?
A Paint colour
B Room size
C The brand logo
D Material and load
Answer: D. Material and load. Fastener type and size should suit the material, hole, and expected load.
Which tool can remove a small upholstery staple?
A Staple remover
B Pipe wrench
C Spirit level
D Claw hammer
Answer: A. Staple remover. A staple remover can lift staples; use care around sharp points.
What should be done before removing upholstery staples?
A Hold staples in teeth
B Wear eye protection
C Use bare hands
D Work near children
Answer: B. Wear eye protection. Staples can spring free, so protect eyes and keep others away.
How can a loose chair rung be checked?
A Push harder on it
B Inspect joint and surrounding wood
C Cover with a cloth
D Paint over the seam
Answer: B. Inspect joint and surrounding wood. Check the joint and surrounding material for cracks or looseness.
What can happen if a chair joint is loaded before glue cures?
A The glue dries instantly
B The wood expands safely
C The joint becomes permanent
D The repair may fail
Answer: D. The repair may fail. Loading a joint too early can disrupt the bond before it cures.
Which repair can improve a sliding drawer?
A Clean and align its slides
B Add paint to rails
C Hammer the drawer shut
D Remove its handle
Answer: A. Clean and align its slides. Cleaning and aligning slides can improve drawer movement.
Why should a swollen wood panel not be forced into place?
A It becomes stronger
B It removes moisture
C It can crack or worsen
D It fixes the joint
Answer: C. It can crack or worsen. Forcing swollen or misaligned parts can cause additional damage.
What is a suitable approach to a furniture surface scratch?
A Use compatible touch-up materials
B Apply random solvent
C Sand through veneer
D Fill with cooking oil
Answer: A. Use compatible touch-up materials. Use a repair product compatible with the existing finish and follow its directions.
How can veneer damage become worse?
A Cleaning gently
B Using a compatible adhesive
C Sanding too aggressively
D Protecting the edge
Answer: C. Sanding too aggressively. Aggressive sanding can cut through thin veneer and worsen the damage.
What should be used to clean furniture before refinishing?
A A compatible cleaner
B Any strong solvent
C Household bleach always
D An open flame
Answer: A. A compatible cleaner. Use a cleaner compatible with the finish and follow product precautions.
Why should chemical strippers be used carefully?
A They are always harmless
B They remove all hazards
C They can create harmful exposure
D They need no ventilation
Answer: C. They can create harmful exposure. Chemical strippers can pose health hazards; follow labels and use suitable protection.
What should be done if furniture repair involves a gas lift or spring?
A Use qualified service
B Cut the spring
C Release it by force
D Ignore stored energy
Answer: A. Use qualified service. Gas lifts and springs can store energy; use qualified service rather than forcing them apart.
Which furniture part may require specialist repair?
A Loose drawer pull
B Small surface nick
C Recliner spring mechanism
D Decorative trim
Answer: C. Recliner spring mechanism. Spring mechanisms can release stored force and may require specialist repair.
How should outdoor furniture repairs consider weather?
A Use suitable exterior materials
B Use any indoor glue
C Leave joints wet
D Ignore the product label
Answer: A. Use suitable exterior materials. Use coatings and adhesives rated for the expected outdoor exposure.
What can help prevent corrosion on outdoor fasteners?
A Paint over rust only
B Use wet wood screws
C Choose suitable corrosion-resistant hardware
D Store furniture in water
Answer: C. Choose suitable corrosion-resistant hardware. Suitable corrosion-resistant hardware can help outdoor joints last longer.
Which practice lowers trip risk during furniture repair?
A Organise tools and parts
B Scatter screws on floor
C Block room exits
D Leave drawers open
Answer: A. Organise tools and parts. Keep tools, parts, and walkways organised during repair.
What should happen to a damaged power tool used in repair?
A Keep working slowly
B Tape the cord
C Remove it from use
D Share it with a helper
Answer: C. Remove it from use. Remove damaged tools from use until they are repaired or replaced.
How can furniture be moved more safely after repair?
A Plan the lift and route
B Twist while lifting
C Carry beyond balance
D Block your view
Answer: A. Plan the lift and route. Plan the route and get help for heavy or awkward furniture.
What can a measuring tape help with in repair?
A Test wood glue
B Measure electrical current
C Check part dimensions
D Sharpen blades
Answer: C. Check part dimensions. A tape measure helps confirm dimensions before cutting or replacing parts.
Which finish step helps protect a repaired wood surface?
A Apply a compatible finish
B Leave wet glue exposed
C Use cooking oil
D Skip drying
Answer: A. Apply a compatible finish. A compatible finish can protect the surface when applied as directed.
Why follow a furniture manufacturer’s repair guidance?
A All furniture is identical
B Instructions set room colour
C Parts and load limits differ
D Repairs need no tools
Answer: C. Parts and load limits differ. Designs, materials, and load limits vary, so follow the manufacturer’s instructions.
Which item is not a structural furniture repair?
A Replace a decorative knob
B Rebuild a cracked frame
C Repair a split leg
D Reinforce a failed joint
Answer: A. Replace a decorative knob. Replacing a decorative knob is a minor repair rather than a structural rebuild.
What should be done if furniture still wobbles after repair?
A Add more weight
B Ignore the movement
C Stop using and reassess
D Place it on a cushion
Answer: C. Stop using and reassess. Continued wobbling indicates the repair may not be secure; stop using it and reassess.
How should small repair parts be stored around children?
A Securely out of reach
B In a toy box
C On the floor
D Inside open drawers
Answer: A. Securely out of reach. Small parts can be choking hazards; store them securely out of reach.
How can a newly glued chair joint be protected?
A Load it immediately
B Twist it repeatedly
C Keep it clamped while curing
D Wet the joint
Answer: C. Keep it clamped while curing. Hold the aligned joint as directed until the adhesive has cured.
What should be checked after anchoring furniture?
A Attachment and stability
B Paint colour
C Drawer fragrance
D Room temperature
Answer: A. Attachment and stability. Check that the anchoring device is attached as instructed and the furniture is stable.